Altronix NETWAY4EWPX vs Altronix NETWAY4EBTB: Specification Comparison
Both the Altronix NETWAY4EWPX and NETWAY4EBTB are 4-port gigabit PoE switches built for physical-security infrastructure, sharing Altronix LINQ supervision compatibility and lifetime warranties. The comparison centers on deployment environment, PoE power tier, and form factor: the NETWAY4EWPX is a managed, weatherized outdoor enclosure with fiber uplink and integrated battery-charger circuitry, while the NETWAY4EBTB is a board-form switch designed for cabinet or PDU integration, offering a higher per-port PoE++ budget on a compact, unenclosed footprint.
In This Guide
Which switch delivers more PoE power, and to what device class?
The NETWAY4EBTB carries a 240 W total PoE budget at up to 90 W per port under 802.3bt (4PPoE / PoE++), making it the correct choice for devices that draw beyond the 802.3at ceiling — multi-sensor panoramic cameras, high-wattage PTZ units, or access-control panels with door hardware on a single cable.
The NETWAY4EWPX provides 120 W total at the 802.3at (PoE+) standard, with a dual 60 W Hi-PoE capability noted in the product tilde-fields for PTZ cameras. Its per-port maximum is not explicitly stated as a discrete wattage figure in the supplied specs beyond that 60 W Hi-PoE notation, so installers should confirm per-port limits against the datasheet before sizing high-draw endpoints.
Budget math matters for multi-port simultaneous draw: the NETWAY4EBTB's 240 W pool is twice the NETWAY4EWPX's 120 W, giving more headroom when all four ports are loaded concurrently.
Which unit is rated for outdoor or harsh-environment installation?
The NETWAY4EWPX is explicitly rated for outdoor use: its enclosure carries NEMA 4/4X and IP66 certifications, protecting against hose-directed water and dust ingress. Its operating storage range extends to –40 °C (–40 °F), consistent with cold-climate outdoor deployments. Physical dimensions of 17.53" × 15.3" × 6.67" reflect a full protective enclosure with mounting provisions for wall, pole, or rack.
The NETWAY4EBTB is a board form factor (6.25" × 4.5" × 1.25") with a lower storage floor of –30 °C (–22 °F). No outdoor or NEMA/IP enclosure rating is listed in the supplied specs. It accepts 48–56 V DC input and is intended for integration inside an existing cabinet or alongside a PDU — the installer supplies the enclosure and any environmental protection.
For any installation exposed to weather, wash-down, or extreme cold, only the NETWAY4EWPX carries the rated enclosure. The NETWAY4EBTB requires a suitable host enclosure to meet environmental requirements.
Which switch offers more management capability and backbone integration options?
The NETWAY4EWPX is specified as a Layer 2+ managed switch supporting VLAN, QoS, and Spanning Tree Protocol, plus LINQ supervision. It includes an integrated battery charger that supports Altronix backup modules, adding a managed power-backup path without a separate charger unit. Its fiber uplink is a 1 Gbps SFP port (transceiver sold separately), accommodating either single-mode or multi-mode fiber depending on the transceiver chosen.
The NETWAY4EBTB lists LINQ compatibility and a single-mode fiber SFP uplink. No Layer 2+ management features such as VLAN, QoS, or Spanning Tree are identified in the supplied specifications. There is no mention of integrated battery-charger circuitry; backup power would depend on the host cabinet or external UPS.
For sites requiring network segmentation (camera VLANs), traffic prioritization, or loop protection — common in enterprise and multi-tenant deployments — the NETWAY4EWPX's documented managed-switching feature set is the only option confirmed by the provided specs.
Which should you choose: the NETWAY4EWPX or the NETWAY4EBTB?
Our take: The NETWAY4EWPX is the stronger choice when the installation site is outdoors, requires managed switching features, or demands integrated battery-backup capability in a self-contained enclosure. Its NEMA 4/4X IP66 enclosure, –40 °C cold-start rating, and Layer 2+ management (VLAN, QoS, Spanning Tree) are confirmed by the provided specs; the NETWAY4EBTB documents none of these. Conversely, the NETWAY4EBTB's 240 W total budget and 90 W per-port 802.3bt capability is twice the NETWAY4EWPX's 120 W pool — a decisive advantage for high-draw 4PPoE devices inside a controlled, cabinet-based environment. Choose the NETWAY4EWPX for outdoor edge nodes, fiber-linked camera clusters, or any deployment needing managed VLANs and onboard battery charging. Choose the NETWAY4EBTB for indoor PDU/cabinet builds where endpoint devices exceed 30 W per port and the host cabinet provides its own enclosure and power conditioning.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Altronix NETWAY4EWPX | Altronix NETWAY4EBTB |
|---|---|---|
| Product Type | PoE Switch | PoE Switch |
| Form Factor | Switch (enclosed) | Switch Board |
| PoE Standard | PoE+ (802.3at) | PoE++ (802.3bt) |
| Total PoE Budget | 120 W | 240 W |
| Max Per-Port Power | 60 W Hi-PoE (dual ports) | 90 W (per port, 4 ports) |
| Data Ports | 4× Gigabit PoE/PoE+ | 4× Gigabit PoE |
| Fiber Uplink | 1× Gigabit SFP (transceiver not included) | 1× SFP Single-Mode Fiber |
| Management | Layer 2+ Managed (VLAN, QoS, STP) | — |
| Supervision | LINQ | LINQ compatible |
| Enclosure Rating | NEMA 4/4X, IP66 | — |
| Environment | Outdoor rated | Indoor cabinet / PDU integration |
| Battery Backup | Yes — integrated charger, supports Altronix backup modules | — |
| Input Voltage | — | 48–56 V DC |
| Mount Type | Wall; Pole; Rack | Rack |
| Storage Temp Range | –40 °C to 85 °C (–40 °F to 185 °F) | –30 °C to 85 °C (–22 °F to 185 °F) |
| Dimensions | 17.53" × 15.3" × 6.67" | 6.25" × 4.5" × 1.25" |
| Warranty | Lifetime | Lifetime |
Frequently Asked Questions
Which should you choose: the NETWAY4EWPX or the NETWAY4EBTB?
The NETWAY4EWPX is the stronger choice when the installation site is outdoors, requires managed switching features, or demands integrated battery-backup capability in a self-contained enclosure. Its NEMA 4/4X IP66 enclosure, –40 °C cold-start rating, and Layer 2+ management (VLAN, QoS, Spanning Tree) are confirmed by the provided specs; the NETWAY4EBTB documents none of these. Conversely, the NETWAY4EBTB's 240 W total budget and 90 W per-port 802.3bt capability is twice the NETWAY4EWPX's 120 W pool — a decisive advantage for high-draw 4PPoE devices inside a controlled, cabinet-based environment. Choose the NETWAY4EWPX for outdoor edge nodes, fiber-linked camera clusters, or any deployment needing managed VLANs and onboard battery charging. Choose the NETWAY4EBTB for indoor PDU/cabinet builds where endpoint devices exceed 30 W per port and the host cabinet provides its own enclosure and power conditioning.
Can either switch power 802.3bt (90 W) devices like multi-sensor cameras?
Only the NETWAY4EBTB is specified at the 802.3bt (PoE++) standard with up to 90 W per port and a 240 W total budget. The NETWAY4EWPX is rated at 802.3at (PoE+) with a 120 W total budget and dual 60 W Hi-PoE ports; it does not claim 802.3bt compliance in the provided specs.
Which unit can I mount outdoors on a pole or wall without an additional enclosure?
The NETWAY4EWPX is the only model here rated for outdoor installation. It carries a NEMA 4/4X, IP66 enclosure and supports wall and pole mounting. The NETWAY4EBTB is a bare board form factor with no listed NEMA or IP rating and is designed to be housed inside an existing cabinet.
Does either switch support VLAN segmentation for separating camera traffic from the corporate network?
The NETWAY4EWPX is explicitly specified as a Layer 2+ managed switch with VLAN, QoS, and Spanning Tree support. The provided specs for the NETWAY4EBTB do not list any of these managed-switching features, so VLAN segmentation cannot be confirmed for that model based on the available documentation.
More Network Switch Comparisons
- Vivotek GET-083A-120 vs TP-Link SG1005P
- Vivotek GET-083A-120 vs Axis T8504-E
- Vivotek GET-083A-120 vs Axis D8004
- Vivotek GET-083A-120 vs Ubiquiti N-SW
- TP-Link SG1005P vs Axis T8504-E
- TP-Link SG1005P vs Axis D8004
Network Switch Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.