Altronix NETWAY4EBTWPX vs TP-Link SG1005P: Specification Comparison
Both the Altronix NETWAY4EBTWPX and the TP-Link TL-SG1005P are unmanaged Gigabit PoE switches intended to power IP cameras and other PoE devices at the network edge. While they share the same fundamental device class, they are engineered for sharply different deployment contexts: the NETWAY4EBTWPX targets hardened outdoor infrastructure installations, while the TL-SG1005P targets lightweight indoor desktop environments. This comparison evaluates PoE power delivery, physical environment suitability, and deployment/integration characteristics to help installers and IT buyers determine which unit fits their specific application.
In This Guide
- How do the PoE budgets and per-port power limits compare between the two switches?
- Which switch is rated for outdoor or harsh-environment deployment, and does either unit include power backup?
- What uplink, management, and deployment options does each switch offer?
- Which should you choose: the NETWAY4EBTWPX or the SG1005P?
- Side-by-Side Specs
- FAQ
How do the PoE budgets and per-port power limits compare between the two switches?
The Altronix NETWAY4EBTWPX delivers a total PoE budget of 240W across 4 ports, with a maximum of 90W per port under the 802.3bt (PoE++) standard. This supports high-draw devices such as multi-sensor panoramic cameras, PTZ cameras with heaters, or access control panels with electric strikes — all from a single port if needed.
The TP-Link TL-SG1005P provides a total PoE budget of 65W across 4 PoE-capable ports (5 ports total), rated to the 802.3af (PoE) standard. The spec data also references 802.3af/at (PoE+) and a per-port maximum of 30W in one field, but lists the PoE standard as 802.3af in the primary field. The total budget of 65W limits simultaneous device loading; powering four cameras at or near the per-port ceiling will exhaust the budget quickly.
For installations requiring high-wattage per-device delivery — such as 802.3bt PTZ cameras, multi-imager units, or door controllers with strike power — the NETWAY4EBTWPX's 90W-per-port, 240W-total architecture provides substantially more headroom. The TL-SG1005P is better matched to lower-draw 802.3af cameras and access points where aggregate power demand stays well under 65W.
Which switch is rated for outdoor or harsh-environment deployment, and does either unit include power backup?
The Altronix NETWAY4EBTWPX is housed in a NEMA 4/4X IP66-rated enclosure, qualifying it for outdoor installation and exposure to rain, dust, and corrosive environments. It is explicitly rated for outdoor use and supports DIN-rail or pole mounting, making it suitable for junction-box deployments on poles, walls, or inside outdoor equipment cabinets.
The TP-Link TL-SG1005P is a desktop form-factor switch specified at an operating temperature of 0°C to 40°C (though one spec field lists −30°C to 70°C — this inconsistency in the provided data is noted). It is packaged with a power adapter and sized at 3.9 × 3.9 × 1.0 in., indicating an indoor tabletop or shelf installation. No outdoor or harsh-environment enclosure rating is listed in the provided specifications.
A critical differentiator is battery backup: the NETWAY4EBTWPX integrates a 240W supply with a battery charger, enabling connected PoE devices to remain online during a power outage. No battery backup capability is listed for the TL-SG1005P. For security-critical edge nodes where uptime during power loss is a requirement, this distinction is decisive.
What uplink, management, and deployment options does each switch offer?
The Altronix NETWAY4EBTWPX includes a fiber SFP uplink port supporting single-mode and multi-mode fiber, enabling long-distance runs back to an IDF or head-end without copper distance limitations. This is a significant operational advantage in campus, parking structure, or perimeter deployments where the switch may be hundreds of meters from the core.
The TP-Link TL-SG1005P provides 5 copper Gigabit ports (4 PoE, 1 uplink), a 10 Gbps switching capacity, and an Extend mode that stretches PoE range to 250 m at 10 Mbps — useful for reaching distant cameras over existing UTP runs without additional hardware. No fiber uplink is listed in the provided specifications.
Both switches are unmanaged, offering plug-and-play operation with no VLAN, QoS, or remote management configuration. The NETWAY4EBTWPX carries a lifetime warranty; no warranty term is listed in the provided specifications for the TL-SG1005P. Note that the TL-SG1005P carries an internal 'hide_reason: pricing_violation_2026-05-06' flag in its catalog record — buyers should verify current availability and pricing status before specifying.
Which should you choose: the NETWAY4EBTWPX or the SG1005P?
Our take: The NETWAY4EBTWPX is the stronger choice when the deployment site is outdoors, in a corrosive environment, or requires high per-port power and battery-backed uptime. Three concrete spec deltas make the case: (1) PoE budget is 240W vs. 65W — nearly 4× the headroom; (2) per-port maximum is 90W (802.3bt) vs. 30W (802.3af/at per field data) — enabling high-draw PTZ and multi-sensor cameras the TP-Link cannot power; (3) NEMA 4/4X IP66 outdoor enclosure with DIN-rail/pole mounting vs. a desktop indoor form factor with no environmental rating. The NETWAY4EBTWPX also adds fiber SFP uplink and integrated battery backup — neither available on the TL-SG1005P. The TL-SG1005P suits low-density indoor installs with cost-sensitive budgets and modest PoE demand. Specify the NETWAY4EBTWPX for any outdoor, industrial, or mission-critical edge node; the TL-SG1005P for simple indoor desktop camera drops only.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Altronix NETWAY4EBTWPX | TP-Link SG1005P |
|---|---|---|
| Device Class | Unmanaged PoE Switch (Outdoor) | Unmanaged PoE Switch (Desktop) |
| Total PoE Budget | 240W | 65W |
| PoE Standard | 802.3bt (PoE++) | 802.3af (PoE) — some fields reference af/at |
| Max Power Per Port | 90W | 30W (per Wattage field; primary field lists 802.3af) |
| PoE Ports | 4 | 4 (of 5 total) |
| Total Ports | 4 | 5 |
| Uplink Type | 1x SFP fiber (single/multi-mode) | Copper Gigabit (no fiber uplink listed) |
| Switching Capacity | Not specified in provided specs | 10 Gbps |
| Enclosure Rating | NEMA 4/4X, IP66 outdoor-sealed | No outdoor/IP rating listed |
| Operating Temperature | Not specified in provided specs | 0°C to 40°C (primary field) |
| Mounting | DIN-rail, Pole | Desktop (mounting holes listed) |
| Battery Backup | Yes — integrated battery charger | No |
| PoE Extend Mode | Not listed | Yes — 250m at 10 Mbps |
| Managed | No | No |
| Warranty | Lifetime | Not specified in provided specs |
| Form Factor / Environment | Outdoor hardened enclosure | Indoor desktop |
Frequently Asked Questions
Which should you choose: the NETWAY4EBTWPX or the SG1005P?
The NETWAY4EBTWPX is the stronger choice when the deployment site is outdoors, in a corrosive environment, or requires high per-port power and battery-backed uptime. Three concrete spec deltas make the case: (1) PoE budget is 240W vs. 65W — nearly 4× the headroom; (2) per-port maximum is 90W (802.3bt) vs. 30W (802.3af/at per field data) — enabling high-draw PTZ and multi-sensor cameras the TP-Link cannot power; (3) NEMA 4/4X IP66 outdoor enclosure with DIN-rail/pole mounting vs. a desktop indoor form factor with no environmental rating. The NETWAY4EBTWPX also adds fiber SFP uplink and integrated battery backup — neither available on the TL-SG1005P. The TL-SG1005P suits low-density indoor installs with cost-sensitive budgets and modest PoE demand. Specify the NETWAY4EBTWPX for any outdoor, industrial, or mission-critical edge node; the TL-SG1005P for simple indoor desktop camera drops only.
Can either switch power a high-wattage PTZ camera with a built-in heater?
The NETWAY4EBTWPX supports up to 90W per port under 802.3bt, which accommodates most high-draw PTZ cameras with heaters and blowers. The TL-SG1005P's per-port maximum is listed as 30W (802.3af/at) in the provided specs, which is insufficient for heater-equipped PTZ units that commonly require 60W or more. Only the NETWAY4EBTWPX is specified for that use case.
Will the NETWAY4EBTWPX keep cameras running during a power outage?
Yes — the NETWAY4EBTWPX integrates a 240W power supply with a battery charger, providing backup power to connected PoE devices when mains power is lost. The TL-SG1005P has no battery backup capability listed in its specifications; it relies on an external power adapter and will go offline during a power outage unless an external UPS is added.
Is the TP-Link TL-SG1005P suitable for an outdoor camera pole mount?
No enclosure or outdoor rating is listed in the provided TL-SG1005P specifications. It is a desktop-form-factor switch with a 0–40°C operating temperature range (per the primary spec field) and is packaged with a standard power adapter — neither designed nor rated for outdoor or pole-mount installation. The NETWAY4EBTWPX is explicitly rated NEMA 4/4X IP66 and supports pole and DIN-rail mounting for outdoor deployments.
More Network Switch Comparisons
- Vivotek GET-083A-120 vs TP-Link SG1005P
- Vivotek GET-083A-120 vs Axis T8504-E
- Vivotek GET-083A-120 vs Axis D8004
- Vivotek GET-083A-120 vs Ubiquiti N-SW
- TP-Link SG1005P vs Axis T8504-E
- TP-Link SG1005P vs Axis D8004
Network Switch Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.