2N 01273-001 vs 2N 03369-001: Specification Comparison
Both products are 2N wired IP video intercoms — door stations designed for building-entry access control with two-way audio and integrated cameras. The 01273-001 (IP Verso Nickel) is a modular, design-forward main unit targeting indoor lobbies or architecturally sensitive installs, while the 03369-001 (IP Force 5MP) is a ruggedized outdoor unit built for high-traffic and higher-security entry points. Buyers choosing between them are weighing image resolution and analytics depth against modularity and form factor for their specific deployment environment.
In This Guide
- Which unit delivers better visitor identification: imaging resolution and on-device analytics?
- Which unit is built for harsher outdoor or high-traffic conditions?
- How do power requirements and physical expandability differ between these units?
- Which should you choose: the 01273-001 or the 03369-001?
- Side-by-Side Specs
- FAQ
Which unit delivers better visitor identification: imaging resolution and on-device analytics?
The 03369-001 specifies a 5MP sensor at 2592×1944 resolution, enabling face-capture-grade detail at the door. It also carries an ARTPEC-8 processor with on-device facial detection and QR code reading (1D/2D), providing credential-scan and adaptive face-zooming capabilities without requiring a server-side analytics license.
The 01273-001 specifies a 640×480 color camera supplemented by thermal infrared imaging for 24/7 low-light visitor identification. No resolution upgrade path or on-device analytics are listed in its specs. The thermal night-vision is a meaningful differentiator for zero-light environments, but the 640×480 color resolution is substantially lower than the 03369-001's 5MP output for daytime face capture.
For deployments where facial recognition, QR credential scanning, or high-definition video evidence are priorities, the 03369-001's imaging and analytics stack is materially stronger. The 01273-001's thermal layer addresses a different need — reliable identification when ambient light is absent — but does not close the daytime resolution gap.
Which unit is built for harsher outdoor or high-traffic conditions?
The 03369-001 carries an IP66 ingress protection rating (dust-tight, protected against powerful water jets) and an IK10 impact resistance rating, the highest standard IK class, designed to withstand repeated heavy impacts. It is explicitly spec'd as an outdoor unit with wall-mount installation.
The 01273-001 is rated IP54 (dust protected, splash resistant from all directions) and IK08 impact resistance. Both ratings are lower than the 03369-001's IP66/IK10. No explicit outdoor rating is stated in its specs.
For exposed outdoor installations — perimeter gates, parking structures, loading docks — the 03369-001's IP66/IK10 envelope is the clear match. The 01273-001's IP54/IK08 ratings are appropriate for semi-sheltered or indoor lobby deployments where full weather and vandal exposure is not expected.
How do power requirements and physical expandability differ between these units?
The 01273-001 is powered by standard PoE (802.3af), typically 15.4W maximum delivery. It features a 2-position modular frame with one slot reserved for additional modules (keypad, card reader, fingerprint, etc.), making it expandable without changing the housing.
The 03369-001 requires PoE+ (802.3at) at approximately 15–18W to support its 5MP sensor, ARTPEC-8 processor, and on-device analytics. Existing 802.3af-only switches must be upgraded or supplemented with a PoE+ injector before deployment. Its spec notes it can be equipped with a wide-angle camera module and a numeric keypad module, indicating modular capability, but the frame position count is not specified.
The 01273-001's 802.3af compatibility is an infrastructure advantage where legacy PoE switches are already in place. The 03369-001's PoE+ requirement adds a power-budget line item per door. On modularity, the 01273-001's 2-position frame count is explicitly documented; the 03369-001's module options are noted but slot count is not specified in the provided specs.
Which should you choose: the 01273-001 or the 03369-001?
Our take: The 03369-001 is the stronger choice when outdoor durability, high-resolution face capture, and on-device credential analytics are required. Its 5MP sensor versus the 01273-001's 640×480 represents a substantial imaging gap for identity verification; its IP66/IK10 versus IP54/IK08 makes it the correct unit for unsheltered or vandal-risk locations; and its ARTPEC-8 with QR scanning adds access-control intelligence absent from the 01273-001. The 01273-001 holds advantages in two specific scenarios: installations on 802.3af-only infrastructure (avoiding a PoE+ upgrade), and environments where thermal night vision — not available on the 03369-001 per provided specs — is the primary identification requirement, such as zero-ambient-light exterior entries. Platform note: both units run H.264/MJPEG compression and carry ONVIF support (01273-001 confirmed; 03369-001 not stated in provided specs), so VMS compatibility should be verified against the target platform before specifying either.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | 2N 01273-001 | 2N 03369-001 |
|---|---|---|
| SKU | 01273-001 | 03369-001 |
| Product Line | 2N IP Verso | 2N IP Force |
| Camera Resolution | 640×480 color | 5MP (2592×1944) |
| Night Vision | Thermal infrared | — |
| On-Device Analytics | — | Facial detection, QR scanning (1D/2D) |
| Processor | — | ARTPEC-8 |
| Video Compression | H.264; MJPEG | H.265; H.264 |
| Power Standard | PoE (802.3af) | PoE+ (802.3at) |
| Power Consumption | — | ~15–18W |
| IP Rating | IP54 | IP66 |
| Impact Rating | IK08 | IK10 |
| Environment | — | Outdoor |
| ONVIF | Yes | — |
| Modular Frame | 2-position (1 expandable slot) | Optional wide-angle camera + keypad modules (slot count not specified) |
| Audio | Built-in mic | Two-way (microphone + speaker) |
| Bluetooth | Yes (Smart technology) | — |
| Warranty | 3-Year | — |
Frequently Asked Questions
Which should you choose: the 01273-001 or the 03369-001?
The 03369-001 is the stronger choice when outdoor durability, high-resolution face capture, and on-device credential analytics are required. Its 5MP sensor versus the 01273-001's 640×480 represents a substantial imaging gap for identity verification; its IP66/IK10 versus IP54/IK08 makes it the correct unit for unsheltered or vandal-risk locations; and its ARTPEC-8 with QR scanning adds access-control intelligence absent from the 01273-001. The 01273-001 holds advantages in two specific scenarios: installations on 802.3af-only infrastructure (avoiding a PoE+ upgrade), and environments where thermal night vision — not available on the 03369-001 per provided specs — is the primary identification requirement, such as zero-ambient-light exterior entries. Platform note: both units run H.264/MJPEG compression and carry ONVIF support (01273-001 confirmed; 03369-001 not stated in provided specs), so VMS compatibility should be verified against the target platform before specifying either.
Can I power the 03369-001 from my existing PoE switch, or do I need to upgrade?
The 03369-001 requires PoE+ (802.3at) at approximately 15–18W. Standard PoE (802.3af) switches are limited to 15.4W and may not reliably power the unit. You would need to verify your switch supports 802.3at on that port, or add a PoE+ injector per door. The 01273-001, by contrast, runs on standard PoE (802.3af) and is compatible with existing 802.3af infrastructure.
Does the 01273-001 or 03369-001 support QR code credentials for visitor management?
Only the 03369-001 lists QR code reading (1D/2D) in its specifications, enabled by the onboard ARTPEC-8 processor with on-device analytics. The 01273-001's provided specs do not mention QR scanning capability. If QR-based visitor or delivery credentials are a requirement, the 03369-001 is the unit to specify.
Which unit is better for a covered indoor lobby versus an exposed outdoor gate?
The 01273-001 (IP54, IK08, modular Nickel finish) is suited to covered indoor lobbies or architecturally sensitive semi-sheltered entries where aesthetics and modularity matter and full weather exposure is not expected. The 03369-001 (IP66, IK10, outdoor-rated) is designed for exposed outdoor gates, perimeter access points, and high-traffic entries where sustained weather resistance and vandal protection are required.
More Intercom Comparisons
- Hanwha TID-600R vs Aiphone IX-EA
- Hanwha TID-600R vs Axis A8207-VE
- Hanwha TID-600R vs Aiphone IX-DVF-6
- Hanwha TID-600R vs Aiphone JOS-1FW
- Aiphone IX-EA vs Axis A8207-VE
- Aiphone IX-EA vs 2N 01273-001
Intercom Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.