Lifesafety Power products
-
Lifesafety Power
SKU: FPO75/250-2C8PD8NLCE4
Lifesafety Power FPO75/250-2C8PD8NLCE4 250W power supply 20A/12V
- Delivers 20A/12V or 10A/24V to power multiple fail-safe and fail-secure locks concurrently.
- Eight relay lock outputs are individually selectable for FAI, failsafe, or failsecure mode.
- Eight 3A-fused DC auxiliary outputs support sensors and REX devices across Bus1 or Bus2.
$1,444.00 $948.99 Save $495.01The item has been added -
Lifesafety Power
SKU: FPO75/150-D8PM8PNLCE4S
Lifesafety Power FPO75/150-D8PM8PNLCE4S 150W power supply 12A/12
- Delivers 150W output—12A at 12V DC—to power locks, readers, and aux devices.
- Eight Class 2 power-limited outputs at 2.5A each with per-port short-circuit protection.
- Each output independently selectable for Bus1 or Bus2, supporting dual-bus panel layouts.
$1,668.87 $1,092.99 Save $575.88The item has been added -
Lifesafety Power
SKU: FPO250-C82D8E4M1
Lifesafety Power FPO250-C82D8E4M1 250W power supply 20A/12V or 1
- Dual main buses (12V/20A or 24V/10A) power mixed lock and device loads from one unit.
- 8 relay outputs, each fused at 3A, support failsafe, failsecure, or FAI per output.
- 8 auxiliary DC outputs selectable per bus simplify distributed multi-controller wiring.
$1,199.00 $787.99 Save $411.01The item has been added -
Lifesafety Power
SKU: FPO250-B150M8NLC2SD4PE6M1/T8-A
Lifesafety Power FPO250-B150M8NLC2SD4PE6M1/T8-A 250W power supply
- 250W capacity supports 12V/20A or 24V/10A to feed multi-camera deployments.
- Eight independently fused 3A outputs isolate faults so one short won't drop other ports.
- E6 enclosure (30×23×6.5 in) fits 19-inch racks or wall-mounts beside your NVR.
$3,473.73 $2,313.99 Save $1,159.74The item has been added -
Lifesafety Power
SKU: FPO250-B150C8D8PE6M
Lifesafety Power FPO250-B150C8D8PE6M 250W power supply 20A/12V
- 8 individually fused 3A relay outputs support fail-safe, fail-secure, or FAI per channel.
- Delivers 12VDC/20A or 24VDC/10A within a shared 250W budget—select voltage before design.
- 8 auxiliary 2.5A Class 2 outputs are bus-selectable for split supervision circuit control.
$1,616.00 $1,061.99 Save $554.01The item has been added -
Lifesafety Power
SKU: FPO250-B150C8D8PE4M
Lifesafety Power FPO250-B150C8D8PE4M 250W power supply 20A/12V
- Dual-voltage output (12VDC/20A or 24VDC/10A) supports mixed-voltage deployments on one unit.
- Eight individually fused 3A relay outputs support per-output failsafe, failsecure, or FAI logic.
- Eight 2.5A class 2 auxiliary outputs assign to Bus1 or Bus2 for supervised auxiliary load monitoring.
$1,109.00 $728.99 Save $380.01The item has been added -
Lifesafety Power
SKU: FPO250-B100D8PM8PNLCE4M
Lifesafety Power FPO250-B100D8PM8PNLCE4M 250W power supply 20A/1
- Delivers 250W with 20A @ 12VDC or 10A @ 24VDC to support core surveillance loads.
- Eight Class 2 power-limited 2.5A auxiliary outputs provide individual circuit isolation per channel.
- Per-output Bus1/Bus2 assignment enables zone segmentation to reduce single-point failure risk.
$1,530.00 $1,004.99 Save $525.01The item has been added -
Lifesafety Power
SKU: FPO250-B100D8PM8PNLCE4A
Lifesafety Power FPO250-B100D8PM8PNLCE4A 250W power supply 20A/1
- Eight Class 2 outputs, each current-limited to 2.5A, stop short-circuit faults from cascading.
- Select 12VDC/20A or 24VDC/10A at install time to match camera or access control voltage needs.
- Bus1/Bus2 per-output assignment enables isolated power branches and supervised redundancy schemes.
$1,534.00 $1,004.99 Save $529.01The item has been added -
Lifesafety Power
SKU: FPO250-B1003C82D8PE6M1
Lifesafety Power FPO250-B1003C82D8PE6M1 Mercury Unified Power Sys
- 250W platform supports 24 relay lock outputs and 16 auxiliary outputs from one unit.
- Single 120 VAC input consolidates multi-door power distribution, eliminating per-door circuits.
- Individually addressable outputs enable per-door or per-zone control via your Mercury system.
$2,019.00 $1,326.99 Save $692.01The item has been added -
Lifesafety Power
SKU: FPO250/250-4M8PNLCSD16E4
Lifesafety Power FPO250/250-4M8PNLCSD16E4 250W power supply 20A
- 250W capacity supports 8–12 full-power IP cameras or access readers without undersizing.
- Eight individually supervised 2.5A outputs isolate faults so one short won't kill the system.
- Selectable 12VDC/24VDC output covers both legacy analog and modern IP devices on one supply.
$2,810.00 $1,845.99 Save $964.01The item has been added -
Lifesafety Power
SKU: FPO250/250-4D84M8NLCE12S
Lifesafety Power FPO250/250-4D84M8NLCE12S 250W power supply 20A
- Selectable primary output—12VDC/20A or 24VDC/10A—integrates mixed-voltage devices on one supply.
- Eight independently fused 3A DC auxiliary outputs isolate faults without taking down the full system.
- Per-port Bus1/Bus2 assignment lets you segment cameras, readers, and alarms on separate protected rails.
$7,184.00 $4,718.99 Save $2,465.01The item has been added -
Lifesafety Power
SKU: FPO250/250-4C84D8PNLCE12-WP-INO03
Lifesafety Power FPO250/250-4C84D8PNLCE12-WP-INO03 250W power sup
- Selectable 12V/20A or 24V/10A output matches lock and reader requirements at config time.
- Eight independently fused 3A relay outputs eliminate external relay modules in multi-door builds.
- Eight Class 2 auxiliary outputs at 2.5A each power readers and sensors from one enclosure.
$8,754.00 $5,749.99 Save $3,004.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: FPO250/250-3D8P5M8PNLCE12M/P24-A
Lifesafety Power FPO250/250-3D8P5M8PNLCE12M/P24-A 250W power supp
- Eight Class 2 outputs at 2.5A each eliminate per-zone power supplies and extra wiring.
- Selectable 12V or 24V DC output lets you match existing panel voltage at installation.
- 20A at 12V or 10A at 24V aggregate capacity supports mixed access control deployments.
$10,144.00 $6,662.99 Save $3,481.01The item has been added -
Lifesafety Power
SKU: FPO250/250-2D8P4M8PNLCE4
Lifesafety Power FPO250/250-2D8P4M8PNLCE4 500W Dual Voltage 120
- Dual 250 W rails deliver 500 W total across 12 V and 24 V DC selectable outputs.
- 8 PoE outputs plus 4 auxiliary ports consolidate multi-device power in one enclosure.
- 120 V AC / 50–60 Hz input fits standard commercial branch circuits without conversion.
$2,507.00 $1,646.99 Save $860.01The item has been added -
Lifesafety Power
SKU: FPO250/250-2C82D8E8S
Lifesafety Power FPO250/250-2C82D8E8S 500W Dual Voltage 120 VAC
- 500W dual-voltage output supports up to 16 relay lock outputs simultaneously.
- 16 auxiliary outputs eliminate daisy-chaining across multi-door access control deployments.
- 120 VAC input (108–132 VAC range) requires a dedicated 15A or 20A upstream circuit.
$2,533.00 $1,663.99 Save $869.01The item has been added -
Lifesafety Power
SKU: FPO150-C8D8PNLCE4M
Lifesafety Power FPO150-C8D8PNLCE4M 150W power supply 12A/12V
- Selectable 12V/12A or 24V/6A output handles high-draw locks and long wire runs.
- Eight individually fused 3A relay outputs isolate faults so one failed lock won't cascade.
- Eight separate DC auxiliary outputs power readers, sensors, and indicators independently.
$1,339.00 $879.99 Save $459.01The item has been added -
Lifesafety Power
SKU: FPO150-B150M8NLCSD16E6M/P8-A
Lifesafety Power FPO150-B150M8NLCSD16E6M/P8-A Quick Guide FPO75
- 8 independently fused 3A outputs isolate faults to a single device or zone.
- Selectable 12VDC/12A or 24VDC/6A output suits varied field device voltage needs.
- M8 module enables real-time load monitoring and integration with control panels.
$3,462.00 $2,273.99 Save $1,188.01The item has been added -
Lifesafety Power
SKU: FPO150-B100M8NLCSD16E4M/T8-A
Lifesafety Power FPO150-B100M8NLCSD16E4M/T8-A 150W power supply
- Delivers 150W at 12V/12A or 24V/6A to power cameras, readers, and locks.
- 8 individually fused 3A output ports prevent a single short from cascading.
- Mounts in a compact B100 steel enclosure on wall or DIN rail for tight spaces.
$2,592.00 $1,702.99 Save $889.01The item has been added -
Lifesafety Power
SKU: FPO150-B100D8PM8PNLCE4M1
Lifesafety Power FPO150-B100D8PM8PNLCE4M1 150W power supply 12A
- Delivers 12A at 12VDC or 6A at 24VDC from a single primary rail—selectable at deployment.
- Eight individually supervised auxiliary outputs, each capped at 2.5A with Bus1/Bus2 routing.
- Consolidates core and edge device power in one unit, reducing cable runs on mid-scale installs.
$1,696.00 $1,113.99 Save $582.01The item has been added -
Lifesafety Power
SKU: FPO150-B100D8PM8NLCE4M1
Lifesafety Power FPO150-B100D8PM8NLCE4M1 150W power supply 12A/1
- Delivers 12A at 12V or 6A at 24V to feed medium-scale access control networks.
- Eight individually fused DC outputs enable per-zone fault isolation across Bus1/Bus2.
- Class 2 power-limited design simplifies code compliance on multi-load installations.
$1,696.00 $1,113.99 Save $582.01The item has been added