Back boxes
Showing Results for Back boxes
-
Add to Cart The item has been addedHanwha
SKU: SBS-165B
Hanwha SBS-165B Surface Mount Back Box for TID-600R
Surface mount back box for TID-600R intercom with M25 conduit
- Aluminum housing with dark grey finish resists corrosion in lobbies
- M25 conduit opening routes power and network cables safely through walls
- Mounts directly to drywall, tile, or concrete—no cavity prep needed
In stock · Ships same business day$49.00 $48.99 Save $0.01The item has been added -
Hanwha
SKU: SBV-140WW
Hanwha SBV-140WW Back Box Mounting Accessory
IP66 aluminum back box for outdoor dome camera mounting and cable protection
- IP66/NEMA4X sealed construction keeps rain and dust away from connectors
- TR20 screw mount matches Hanwha dome camera bases with no adapters needed
- M25 conduit entry accepts standard cable glands; 2kg load capacity, 835g weight
$76.00 $75.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBV-158G
Hanwha SBV-158G Back Box for Vandal Dome Cameras
IP66 sealed back box for 17 Hanwha vandal dome models
- IK10 impact-rated housing protects camera body from vandalism and harsh weather
- Sealed M20 cable glands prevent moisture ingress into connectors and terminals
- Fits SNV, XNV, and PNV series domes; white rugged construction for outdoor use
$85.00 $63.99 Save $21.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBV-160BW
Hanwha SBV-160BW Dome Back Box
IP66 aluminum dome back box for Hanwha wall or ceiling mounts
- IP66-rated aluminum construction handles rain, spray, and dust outdoors
- Operates reliably from -40°C to 60°C across seasonal temperature swings
- Compact 160×120×40mm form factor at 0.5kg reduces installation labor
In stock · Ships same business day$49.00 $48.99 Save $0.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: SBV-180BW
Hanwha SBV-180BW Back Box Accessory for Dome Cameras
White aluminum back box for Hanwha dome cameras with M25 conduit
- Ø183.8 x 51mm compact form factor mounts flush to walls or boxes
- Aluminum construction with RAL9003 white powder coat resists corrosion
- M25 (19.1mm) conduit entry accepts standard threaded connectors
In stock · Ships same business day$49.00 $48.99 Save $0.01The item has been added -
Hanwha
SKU: SBV-180WW
Hanwha SBV-180WW Waterproof Back Box
IP66 waterproof back box for Hanwha XNV cameras in wet environments
- IP66 waterproof + IK10 impact rated protects connectors from rain and spray
- Corrosion-resistant material extends lifespan in coastal and humid settings
- Integrated cable routing prevents pinching and reduces field service failures
$120.00 $89.99 Save $30.01The item has been added -
Hanwha
SKU: TA-13
Hanwha TA-13 On-Wall Back Box Mount
Flush-mount back box for Hanwha TCIS-1 and TMIS-1 intercoms
- Tamper-deterrent design protects intercom from unauthorized access
- Off-wall housing mounts securely to walls for stable installation
- Compatible with Hanwha TCIS-1 Mini Intercom and TMIS-1 models
$315.00 $205.99 Save $109.01The item has been added -
HES
SKU: 426
HES 426 Slimline Back Box
Shallow-profile back box for AXIS dome cameras in tight spaces
- Slimline back box for shallow camera mounting
- Compatible with AXIS fixed dome and compact models
- Flush or semi-recessed install on wall or ceiling
$40.00 $39.99 Save $0.01The item has been added -
HES
SKU: WBB
HES WBB Weather Back Box
Weatherproof back box for outdoor IP camera installations
- Protects fixed and varifocal cameras against moisture, dust, and temperature extremes
- Compatible with standard IP camera mounts for wall and ceiling deployment
- Integrated cable management and equipment access in sealed outdoor enclosure
$64.00 $63.99 Save $0.01The item has been added -
Add to Cart The item has been addedPelco
SKU: CNBX-1001
Pelco CNBX-1001 Corner Mount Conduit Gang Box
- IP66/IK10 rating blocks dust, high-pressure water, and 5 kg impact loads.
- Wall, ceiling, and corner mounting from one SKU reduces field inventory needs.
- 802.3af PoE support eliminates local power supply runs at the camera head.
$138.34 $137.99 Save $0.35The item has been added -
SDC
SKU: BB1D
SDC Security Door Controls BB1D Retrofit Back Box
OSDP retrofit controller for NFC proximity readers in existing installations
- OSDP protocol support enables direct integration with Genetec, Lenel, and Salto platforms.
- Supports ISO 14443 Type A/B NFC credentials at 13.56MHz; no door frame or conduit replacement needed.
- Compatible with existing 13.56MHz proximity readers and keypads, preserving installed hardware investment.
$18.00 $17.99 Save $0.01The item has been added -
Speco Technologies
SKU: CWMT1
Speco CWMT1 Wall Mount Back Box White
White wall-mounted back box for permanent camera installations
- Integrated cable concealment routes wiring inside the enclosure
- Fits standard VESA and industry-mount patterns for broad compatibility
- Designed for indoor security deployments requiring structural support
$94.35 $93.99 Save $0.36The item has been added -
Speco Technologies
SKU: GJCFD
Speco Technologies GJCFD Speco GJCFD Threaded Junction Box
Threaded junction box for Speco camera housing cable management
- Threaded mount design integrates with standard Speco camera housings
- Consolidates cable routing and signal distribution in surveillance setups
- Built for repeated field installation and maintenance access cycles
$33.00 $32.99 Save $0.01The item has been added -
Speco Technologies
SKU: JB2G
Speco Technologies JB2G Large Junction Box Speco Blue- Fxed Lens
Large junction box for mixed Speco camera types with PoE/12VDC
- Supports bullet, turret, and dome fixed-lens cameras in one termination point
- Tool-free RJ45 and power distribution with grey powder-coated steel housing
- Indoor/outdoor rated with multiple camera termination points and standard connectors
$43.75 $42.99 Save $0.76The item has been added -
Speco Technologies
SKU: JB3
Speco Technologies JB3 Multi-Camera Junction Box
Hub consolidates power and video for O-series Speco cameras
- PoE distribution connects multiple cameras to single downstream feed
- Reduces cable runs and conduit load with hub-and-spoke topology
- Mounts indoors at junction or protected backplate locations
$39.20 $38.99 Save $0.21The item has been added -
Speco Technologies
SKU: O4JBD
Speco Technologies O4JBD Junction Box for O4D2M/VLB1TW
Junction box for O4D2M/O8D2M/VLD1TW dome cameras—centralized power & video
- Direct-fit compatibility with O4D2M, O8D2M, and VLD1TW eliminates adapter hardware.
- Centralizes power and video termination at the mount point, reducing cable run complexity.
- Backed by a 3-year warranty; compact 0.7×0.7×0.2 in profile fits tight ceiling cavities.
$27.99The item has been added
Back boxes
Back boxes provide a secure mounting base and protected wiring space for surveillance cameras, intercoms, and access control devices. They help conceal terminations, support clean cable routing, and improve overall installation durability in commercial environments.
Plan Your Deployment
- Device compatibility and mounting pattern alignment
- Surface-mount vs recessed installation requirements
- Indoor vs outdoor environmental rating needs
- Cable entry, strain relief, and termination space planning
- Service access and future replacement considerations
Back boxes — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 29 working models of back boxes sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| IP Rating | IP66, IP67 |
| Power | PoE |
| Type | Accessory, Dome, Power Supply, Turret |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.