Installation Hardware & Kits
Sub categories
Showing Results for Installation Hardware & Kits
-
Axis
SKU: 01921-021
Axis P3925-LRE Bulk 10PCS - 01921-021
- 10-pack of Axis P3925-LRE 5 MP IK10 onboard cameras for fleets
- Motorized 3.4-10.5 mm varifocal lens for remote zoom and focus
- Long-Range Ethernet enables 500m+ cable runs with no midspan switch
$9,490.00 $9,204.99 Save $285.01The item has been added -
Axis
SKU: 01934-021
Axis P3925-LRE M12 Bulk 10PCS - 01934-021
- Bulk 10-pack of Axis P3925-LRE M12 long-range Ethernet cameras
- M12 industrial connector resists vibration and moisture in transit
- LRE supports PoE up to 250m over Cat5e/Cat6 - no midspan switch
$9,490.00 $9,204.99 Save $285.01The item has been added -
Axis
SKU: 5801-901
Axis PT IR Illuminator Kit C 850nm - 5801-901
850nm IR illuminator kit for T99A positioning units with swappable lenses
- Paired 850nm infrared LEDs with three interchangeable lenses for wide or focused coverage
- Metal mounting bracket included; IP66-rated for outdoor perimeter and parking lot use
- Covert nighttime illumination without visible light for 24/7 surveillance capability
$2,069.00 $2,005.99 Save $63.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02554-001
Axis T6112 MKII Audio and I/O Interface - 02554-001
Two-mic audio interface with I/O for Axis cameras, PoE powered
- Audio + I/O interface using Portcast on host camera IP
- No extra DHCP lease - shares the camera's address
- PoE-powered two-way audio with multiple codec support
$199.00 $192.99 Save $6.01The item has been added -
Axis
SKU: 01211-001
Axis T90D20 IR-LED Illuminator PoE - 01211-001
IR illuminator for Axis cameras, 36–144m range, PoE+ powered
- Four interchangeable lenses (10°–80°) match beam angle to camera FOV
- Reaches 144 meters IR distance for large perimeter and vehicle coverage
- IP66/IK09 rated aluminum housing, −50°C to +50°C operating range
In stock · Ships same business day$509.00 $492.99 Save $16.01 -
Axis
SKU: 01212-001
Axis T90D30 IR-LED Illuminator AC/DC - 01212-001
IR illuminator 70–350m range, four interchangeable lenses, IK09 vandal-rated
- Four beam angles (10°–80°) let you dial coverage from narrow spot to wide flood
- Reaches 350 meters in darkness; operates -50°C to +50°C for extreme climates
- IK09 impact-resistant aluminum housing rated IP66 for outdoor/industrial use
$909.00 $880.99 Save $28.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 01213-001
Axis T90D30 IR-LED Illuminator PoE - 01213-001
PoE+ IR illuminator with 70–350m range and swappable beam angles
- Four interchangeable lenses (10°, 35°, 60°, 80°) adapt coverage from distant perimeters to near zones
- PoE+ powered—no separate power cables or conduit runs needed on network camera deployments
- IP66/IK09 aluminum housing rated -50°C to +50°C for outdoor and extreme climates
In stock · Ships same business day$909.00 $880.99 Save $28.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 01217-001
Axis T90D35 White LED Illuminator AC/DC - 01217-001
White LED illuminator with 4 lens angles, 35–180m range, IP66/IK09
- Swap between 10°, 35°, 60°, 80° lenses tool-free to match your coverage zone
- 12/24 V DC or AC input eliminates separate power supply in most installs
- IP66 weatherproof, IK09 impact-resistant housing rated −50°C to 50°C
In stock · Ships same business day$909.00 $880.99 Save $28.01The item has been added -
Axis
SKU: 5901-471
Axis T93C 80mm Extension Kit - 5901-471
80mm extension for T93C housing to mount telephoto lenses up to 75mm
- Fits AXIS Q1659 55–250mm zoom lens with 380mm total assembly length
- Built-in sunshield and front window reduce glare in outdoor high-contrast scenes
- Extends T93C10 housing for long-range surveillance and perimeter monitoring
$119.00 $118.99 Save $0.01The item has been added -
Axis
SKU: 01181-001
Axis T99 Illuminator Bracket Kit A - 01181-001
Dual T90 illuminator bracket for Q8685-E and T99A10 positioning systems
- Mounts two T90 white-LED or IR-LED illuminators for coordinated low-light coverage
- Professional bracket with integrated cable glands, connectors, and management ties
- Complete hardware kit includes fitting brackets, screws, washers, and connectors
$229.00 $221.99 Save $7.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 02686-001
Axis TA1902 Access Control Connector Kit - 02686-001
Wired connector kit for Axis access control door controllers
- RJ45, terminal blocks, and I/O connectors in one package
- Cable ties, clips, and routing sleeves for organized wiring
- Labeled terminals and installation guide speed site deployment
In stock · Ships same business day$105.00 $100.99 Save $4.01The item has been added -
Axis
SKU: 03100-001
Axis TM3826-E Smoked Dome Accessory Pack - 03100-001
Pack of 4 smoked replacement domes for M4225/4227/4228-LVE cameras
- 4-pack of smoked dome covers for the Axis TM3826-E
- Replacement consumable for high-glare environments
- Direct-fit OEM swap with 5-year warranty
$109.00 $104.99 Save $4.01The item has been added -
Axis
SKU: 02713-001
Axis TP1803-E Spare Front Window Kit - 02713-001
IK10 polycarbonate front window kit for Axis P1467-LE & P1468-LE
- UV and abrasion resistant polycarbonate protects against outdoor weathering
- IK10 vandal rating withstands high-impact damage and deliberate tampering
- Complete kit includes front window, cover ring, and rubber gasket for installation
$52.00 $51.99 Save $0.01The item has been added -
Axis
SKU: 02426-001
Axis TQ1810-E Spare Front Kit Q19 Thermal - 02426-001
Spare thermal front window kit for Axis Q19 with IP66 weatherproofing
- Precision-engineered thermal lens assembly maintains imaging clarity
- IP66 weatherproof rating protects against rain, snow, and dust
- Complete kit includes window, gaskets, and mounting hardware
$319.00 $308.99 Save $10.01The item has been added -
Axis
SKU: 02195-001
Axis TQ1902-E IR Illuminator Kit - 02195-001
50m IR + white LED illuminator, camera-powered, 120° coverage
- 850 nm IR LEDs reach 50 m (164 ft); white LED extends 25 m for detail
- Camera-powered operation at 8 W typical—no separate supply needed
- 120° wide illumination angle with aluminum/polycarbonate build for outdoors
$169.00 $162.99 Save $6.01The item has been added -
Axis
SKU: 02798-001
Axis TQ1920 M25x1.5 to 1/2 NPT Adapter - 02798-001
M25x1.5 to 1/2 NPT adapter for ATEX hazardous-area camera mounts
- Nickel-plated brass construction rated II 2G 1D for explosive gas/dust
- ATEX/UKEX Type 737 and IECEx certified for international compliance
- RoHS and REACH compliant, PVC-free for regulated installations
$73.00 $72.99 Save $0.01The item has been added
Installation Hardware & Kits
Installation hardware and kits provide the job-ready components needed to mount, secure, and complete commercial surveillance, access control, and intercom deployments. Standardizing installation parts helps speed up installs and supports consistent long-term serviceability.
Plan Your Deployment
- Mounting surface type and hardware compatibility
- Indoor vs outdoor durability requirements
- Standardization across sites and install teams
- Serviceability and replacement part planning
- Project staging and kit-based installation efficiency
Installation Hardware & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 48 working models of installation hardware & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 5MP, 20MP+, 2MP, 8MP |
| IP Rating | IP68, IP56 |
| Connectivity | Wired |
| Power | PoE |
| Type | Controller, Station Adaptors, LED Beacon/Strobe, Custom/Special Order Unit, Accessories, Lock/Strike, Relays and Control Units |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.