Installation Hardware & Kits
Sub categories
Showing Results for Installation Hardware & Kits
-
HES
SKU: 1500-106-BSP
HES 1500-106-BSP Retrofit Kit for 1500-BSP
24VDC electric strike retrofit kit for 1500-BSP maintenance and upgrades
- Designed for 1500-BSP compatibility, eliminates need for full system replacement
- Standardized installation workflows reduce labor time and deployment downtime
- Supports preventative maintenance, compliance updates, and component replacement
$102.00 $101.99 Save $0.01The item has been added -
HES
SKU: 1600-106-BSP
HES 1600-106-BSP Black Suede Accessory Kit
Black suede accessory kit for HES 1600-series electric strikes
- Coordinates with HES 1600-series strike systems for uniform finish
- Black suede material maintains professional appearance in door frames
- Indoor door-mounted strike assembly integration for commercial access control
$102.00 $101.99 Save $0.01The item has been added -
HES
SKU: JN-50
HES JN-50 Jack Nuts and Flat Head Fastener Kit
100-piece M5 jack nuts and flat head fasteners for HES strike systems
- 50x M5 jack nuts paired with 50x M5 x .75 flat head fasteners
- Flat head profile sits flush in enclosures, brackets, and control panels
- Metric M5 sizing compatible with HES electric strikes and universal mounts
$99.00 $98.99 Save $0.01The item has been added -
HES
SKU: RB-4-24
HES RB-4-24 Relay Board 24VDC
24VDC relay board for HES access control system expansion
- Auxiliary relay switching outputs for electric door locks and devices
- Compatible with HES power supplies and control modules
- Mounts in control rooms and equipment racks for multi-door deployments
$164.00 $163.99 Save $0.01The item has been added -
Honeywell
SKU: 4204
Honeywell 4204 Relay Module
Board-level wireless sensor module with direct 12VDC control panel power
- Powers directly from 12VDC control panel aux output—no separate supply needed.
- Board-level form factor integrates cleanly into standard control panel enclosures.
- Rated 0°C to 50°C supports deployment in climate-controlled security environments.
$9.87 $8.99 Save $0.88The item has been added -
Honeywell
SKU: 520-24-H3
Honeywell Scanning & Mobility 520-24-H3 SC Heater 24V
24V supplemental heater for cold-environment Honeywell scanning systems
- Runs on 24V auxiliary power, fitting directly into compatible Honeywell scanning ecosystems.
- Integrated cable included, enabling straightforward installation without additional wiring.
- Maintains scanner operability in cold-temperature logistics, warehouse, and outdoor deployments.
$2,194.04 $1,516.99 Save $677.05The item has been added -
i-PRO
SKU: IPS-ICV-INCAR-MIC
i-PRO IPS-ICV-INCAR-MIC In-Car Mic RCA Connector
- RCA male connector enables analog audio-in integration with compatible i-PRO in-vehicle recorders.
- Operates reliably across -10°C to +50°C, supporting year-round fleet deployment in varied climates.
- Pairs with systems running H.265/H.264 compression for efficient audio-video documentation in-cabin.
$47.00 $46.99 Save $0.01The item has been added -
i-PRO
SKU: TLC-900D-P
I-pro Leather Pouche FOR Arbitrator Microphone - TLC-900D-P
- OEM leather pouch sized specifically for the i-PRO Arbitrator wireless microphone.
- Soft interior lining protects microphone finish and connectors during daily shift use.
- Integrated belt-clip provision supports standard duty-belt carry for field officers.
$23.00 $22.99 Save $0.01The item has been added -
Add to Cart The item has been addedi-PRO
SKU: WV-PM500
i-PRO WV-PM500 Compact Microphone Unit
IP65 compact microphone unit for 24/7 audio with i-PRO cameras
- IP65 dust and water resistance for outdoor and washdown environments
- Continuous day/night audio capture independent of lighting conditions
- ONVIF compatible integration into existing multi-vendor VMS platforms
In stock · Ships same business day$191.82 $190.99 Save $0.83The item has been added -
Kantech
SKU: KT-ACC
Kantech KT-ACC KT-4 Accessory Kit
Essential passive components and connectors for Kantech access control
- KT-4 accessory kit with passive components for deployment
- Door control, reader interface, and power components
- 0.3 lb kit for rack and panel-mount installations
$71.00 $70.99 Save $0.01The item has been added -
Kantech
SKU: KT-RM1
Kantech KT-RM1 External Isolation Relay Module
External relay isolation module for KT-300 systems with IP67 protection
- External SPDT isolation relay for auxiliary loads
- IP67 sealed enclosure for outdoor exposure
- Isolates noise from main access control logic
$24.00 $23.99 Save $0.01The item has been added -
Kantech
SKU: KTES-HEAT
Kantech KTES-HEAT Heater Kit for Cold Climate
Heater kit extends KTES access control operation below 0°C
- Heater kit enables KTES operation below 0C (32F)
- Maintains component integrity in cold-climate installs
- Compatible with KTES-US and KTES-CDN entry stations
$304.00 $218.99 Save $85.01The item has been added -
Kantech
SKU: SA-RM56
Kantech SA-RM56 Relay Module
Relay module expansion for SA-550, SA-500, and SA-600 control units
- Standalone relay expansion for SA-550/500/600 platforms
- Adds output capacity without replacing host unit
- Direct interconnect to Kantech control infrastructure
$55.00 $54.99 Save $0.01The item has been added -
Pelco
SKU: ACMICR-1001
Pelco ACMICR-1001 Internal Microphone Sarix Pro 4
OEM internal microphone for Pelco Sarix Pro 4 Dome cameras
- Factory-matched pinout and impedance for native audio integration
- Installs using standard Sarix Pro 4 procedures with no extra tooling
- NDAA Section 889 compliant for government security deployments
$10.50 $9.99 Save $0.51The item has been added -
Pelco
SKU: D6220L-US
Pelco D6220L-US Spectra Enhanced 1080p PTZ Drive
1080p PTZ drive unit for Spectra Enhanced housing refresh or upgrade
- 20x optical zoom with 1080p resolution for mid-range surveillance coverage
- Pan-tilt-zoom mechanism with low-light performance for indoor deployments
- NDAA Section 889 compliant; 120V North American power variant
$1,090.99The item has been added -
Pelco
SKU: ES-BLADE-2
Pelco ES-BLADE-2 Esprit PTZ Replacement Wiper Blades
OEM wiper blades for Pelco Esprit PTZ cameras—two-pack replacement
- Eliminates streaking and skipping during automated wash cycles
- Field-serviceable installation without removing camera from mount
- OEM-engineered rubber composition for outdoor surveillance duty
$28.94 $27.99 Save $0.95The item has been added
Installation Hardware & Kits
Installation hardware and kits provide the job-ready components needed to mount, secure, and complete commercial surveillance, access control, and intercom deployments. Standardizing installation parts helps speed up installs and supports consistent long-term serviceability.
Plan Your Deployment
- Mounting surface type and hardware compatibility
- Indoor vs outdoor durability requirements
- Standardization across sites and install teams
- Serviceability and replacement part planning
- Project staging and kit-based installation efficiency
Installation Hardware & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 48 working models of installation hardware & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 5MP, 20MP+, 2MP, 8MP |
| IP Rating | IP68, IP56 |
| Connectivity | Wired |
| Power | PoE |
| Type | Controller, Station Adaptors, LED Beacon/Strobe, Custom/Special Order Unit, Accessories, Lock/Strike, Relays and Control Units |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.