Geovision

SKU: 125-TVD4810-000

Geovision 125-TVD4810-000 IP Security Camera

• IK10-rated housing resists vandalism and impact at loading docks and transit hubs.
• Varifocal 2.7–13.5mm lens adjusts FOV 31°–98° in the field without swapping optics.
• H.265 compression over 802.3af PoE reduces bandwidth and eliminates separate power runs.

Geovision

SKU: 125-TVD8810-0000

Geovision 125-TVD8810-0000

• Pendant mount positions cameras at optimal sight lines where ceiling flush-mount isn't viable.
• Φ120 x 334 mm stem keeps optical center aligned while adding only 0.74 kg of structural load.
• PoE 802.3af compatibility eliminates separate power conduit, simplifying ceiling rough-in wiring.

Geovision

SKU: 391-HD12TB-000

Geovision 12TB Surveillance Grade Sataii Hard - 391-HD12TB-000

• 12TB capacity supports 30–45 days of continuous multi-camera recording before overwrite.
• Surveillance-grade design handles 24/7 thermal and vibration stress where consumer drives fail.
• Standard 3.5-inch SATA II interface integrates with Geovision DVRs/NVRs and third-party recorders.

Geovision

SKU: 84-PCR1352-0010

Geovision 13.56MHZ Mifare Enrollment - 84-PCR1352-0010

• Enrolls and revokes 13.56MHz Mifare ISO14443A Type A credentials without manual entry.
• Integrates with Geovision access control panels and IP PTZ camera platforms natively.
• Connect via supplied interface cable; optimal read range achieved at 2–4 inches from face.

Geovision

SKU: 140-APOE2411-401U

Geovision 140-APOE2411-401U 2MP H.264 Camera Reader Controller

• 2MP H.264 video ties directly to access events for a precise forensic audit trail.
• PoE delivery over standard cabling eliminates dedicated power supplies at remote access points.
• H.264 streams over standard IP integrate into mixed-vendor surveillance and access control stacks.

Geovision

SKU: 140-IPDECO-001

Geovision 140-Ipdeco-001 Gv-Ipdecoderbox Op

• Handles protocol translation between IP cameras and control systems without dedicated NVR resources.
• Box form factor installs in standard server and equipment rack environments.
• Designed for Geovision IP security systems; verify firmware and ONVIF compatibility before deployment.

Geovision

SKU: 150-CMPAN-BXC0

Geovision 150-CMPAN-BXC0 Ceiling Mount

• Ceiling mount bracket supports dome and compact Geovision camera bodies overhead.
• Multi-angle pan and tilt adjustment enables coverage fine-tuning post-installation.
• Quick-mount design allows most integrators to complete one camera install in ~15 min.

Geovision

SKU: 150-MT100-000

Geovision 150-MT100-000 GV-MOUNT 100 Straight Tube

Straight tube and junction mount for Geovision fixed surveillance

• Straight tube and junction box design supports pole, wall, and ceiling-drop installs.
• Lightweight at 3 lb, reducing load stress on mounting surfaces and support structures.
• 3-year warranty provides long-term coverage for fixed surveillance infrastructure deployments.

Geovision

SKU: 150-MT206-000

Geovision 150-MT206-000 GV-MOUNT206 Wall Mount Bracket

• Supports both wall and rack mounting, reducing hardware SKUs across mixed deployments.
• OEM Geovision accessory ensures fitment with standard Geovision camera form factors.
• Metal construction holds camera position firmly, maintaining consistent viewing angles.

Geovision

SKU: 150-MT210-100

Geovision 150-MT210-100 Mount 210-1 Wall Bracket

• Supports both wall and rack mounting, reducing hardware needed across deployments.
• Designed specifically for Geovision Mount 210-1 systems, ensuring verified compatibility.
• Enables equipment repositioning without new infrastructure during system reconfigurations.

Geovision

SKU: 150-MT211-P01

Geovision 150-MT211-P01 GV-MOUNT 211 PLUS Wall Mount Bracket

Wall and rack mount for Geovision IP PTZ cameras

• Dual-mount design supports both wall surface and standard 19-inch rack installations.
• Engineered for Geovision GV-PTZ series cameras; no additional adapters required.
• Compact 10×6×6 in footprint at 2.61 lb keeps overall assembly weight manageable.

Geovision

SKU: 150-MT21120-001

Geovision 150-MT21120-001 GV-MOUNT211-2 Wall Mount

• Supports both wall and 19-inch rack mounting from a single bracket.
• Metal construction suits permanent commercial and industrial deployments.
• Compatible with Geovision cameras and NVR/DVR hardware for system consistency.

Geovision

SKU: 150-MT21220-001

Geovision 150-MT21220-001 GV-MOUNT 212-2 Camera Mounting Bracket

Geovision dedicated bracket for flexible wall, ceiling, pendant mounting

• Rigid bracket prevents camera drift and vibration across temperature cycles.
• Supports wall and ceiling mount orientations for flexible deployment planning.
• Compact 6.5×6×2 in footprint at 0.65 lb with a 3-year warranty included.

Geovision

SKU: 150-MT212P-000

Geovision 150-MT212P-000 Wall Box Mount

• Wall-mount box enclosure centralizes PoE power and cabling at the camera edge point.
• Protects power injectors, terminal blocks, and connectors from dust and moisture.
• Reduces conduit runs by housing Geovision-compatible hardware directly at the install site.

Geovision

SKU: 150-MT901-VD0

Geovision 150-MT901-VD0 GV-MOUNT901 Dome Housing Pendant Mount

• Pendant mount suspends GV-VD series dome housings for clean ceiling drops in corridors and lobbies.
• Interior cable pathway routes PoE cabling through the mount, keeping infrastructure concealed.
• Fixed pendant orientation sets camera angle at install; adjust before final tightening to lock aim.

Geovision

SKU: 150-MT903-ALL

Geovision 150-MT903-ALL GV-MOUNT 903-VD V3 Dome Camera Mount

• Designed specifically for Geovision 903-VD V3 dome cameras, ensuring precise fit.
• Supports ceiling or wall installation for flexible fixed-position surveillance deployments.
• Weather-resistant construction suits both indoor and outdoor mounting environments.