Camden

SKU: CM-1080

Camden CM-1080 Surface Mount Key Switch DPDT Momentary

• DPDT momentary contacts let you drive two independent circuits—strike plus shunt—from one key turn.
• 30VDC rating integrates directly with standard access control power supplies; no voltage conversion needed.
• Accepts 1", 1-1/8", or 1-1/4" mortise cylinders in a die-cast aluminum surface-mount housing.

Camden

SKU: CM-1082

Camden CM-1082 Surface Mount Key Switch DPDT Momentary

• Dual DPDT momentary contacts rated 30VDC enable direct strike or EM lock control.
• Accepts any standard 1"–1¼" mortise cylinder, including master-key and restricted keyways.
• ¼" die-cast aluminum housing with rubber gasket supports indoor and outdoor surface mount.

Camden

SKU: CM-1100

Camden CM-1100 Key Switch SPST Momentary N/O

• Momentary N/O dry contact closes only while key is turned, eliminating relay coil draw.
• 30VDC rated contact integrates directly with low-voltage strike and mag-lock circuits.
• 1/4-inch die-cast aluminum housing accepts 1", 1-1/8", or 1-1/4" mortise cylinders.

Camden

SKU: CM-1105

Camden CM-1105 Key Switch SPST Momentary N/C

• SPST momentary N/C contact closes only while key is held, supporting fail-safe door circuits.
• Rated 30V DC, integrates directly with standard low-voltage strike and access control relays.
• Die-cast aluminum housing with tamperproof screws resists vandalism in high-traffic installations.

Camden

SKU: CM-1110

Camden CM-1110 Key Switch SPST Maintained

• SPST maintained contact holds signal until key-off, giving operators explicit override control.
• Rated 30VDC for direct compatibility with strike circuits and electromagnetic lock power supplies.
• Die-cast aluminum housing mounts flush into 1"–1¼" mortise openings with no network dependency.

Camden

SKU: CM-1130

Camden CM-1130 Key Switch SPDT Maintained Contact

SPDT key switch with maintained contacts for 30VDC strike control

• Dual NO/NC contacts stay actuated until manually reset—no relay logic needed
• 30VDC operation integrates directly with standard access control panels
• TCP/IP network support connects to HID reader systems without gateway device

Camden

SKU: CM-1150

Camden CM-1150 Key Switch 2 SPDT Momentary

Dual-contact key switch for HID access control and electric strike activation

• Two SPDT momentary contacts trigger door locks at 30VDC
• Integrates with HID-based access control systems and strike panels
• Momentary pulse activation for credential verification workflows

Camden

SKU: CM-1160

Camden CM-1160 Key Switch 2 SPDT Maintained

• Two independent SPDT maintained contacts hold 30VDC state without relay logic.
• Die-cast aluminum housing resists vandal and tamper attempts in high-traffic installs.
• Fits 1", 1-1/8", or 1-1/4" mortise cylinders for drop-in retrofit on legacy hardware.

Camden

SKU: CM-1180

Camden CM-1180 Key Switch DPDT Momentary

• DPDT momentary contacts switch two independent circuits simultaneously at 30VDC.
• Die-cast quarter-inch aluminum body withstands prying and weathering on commercial doors.
• Accepts 1", 1-1/8", or 1-1/4" mortise cylinders for straightforward retrofit installs.

Camden

SKU: CM-1182

Camden CM-1182 Key Switch DPDT Momentary

• DPDT configuration controls two independent circuits from a single key activation.
• Momentary spring-return contact prevents sustained power draw on strikes or mag-locks.
• Die-cast aluminum housing withstands outdoor and high-humidity environments like loading docks.

Camden

SKU: CM-1190

Camden CM-1190 DPDT Maintained Key Switch

• DPDT maintained contacts hold switching state until key withdrawal, eliminating bounce-related unlock errors.
• 30VDC rated contacts drive electric strikes, mag-locks, or solenoids directly without external relay stages.
• Die-cast aluminum housing with tamperproof hardware supports outdoor and industrial surface mounting.

Camden

SKU: CM-1192

Camden CM-1192 Key Switch DPDT Maintained

• DPDT design switches two fully isolated circuits simultaneously from a single key.
• Maintained contacts hold state after rotation — no electronic pulse or spring return.
• Rated 30VDC; compatible with 12VDC and 24VDC EM lock and electric strike circuits.

Camden

SKU: CM-1200

Camden CM-1200 Key Switch SPST Momentary N/O

• Momentary N/O contact eliminates hold-open risk in safety-critical access points.
• 30VDC rating integrates directly with EM locks and electric strikes, no conditioning needed.
• Cast stainless steel housing withstands corrosion, UV, and rain for perimeter installs.

Camden

SKU: CM-1205

Camden CM-1205 Key Switch SPST Momentary

• Momentary SPST contact prevents accidental prolonged energization of strikes or EM locks.
• Rated 30VDC for direct wiring to standard strike controllers and EM lock power supplies.
• Accepts standard 1–1.25 in. mortise cylinders to match existing hardware across facilities.

Camden

SKU: CM-1210

Camden CM-1210 Key Switch SPST Maintained

• Maintained SPST contact latches open until manually reset, eliminating accidental release.
• Rated 30VDC for direct wiring to standard access control panel outputs—no relay needed.
• Stainless steel flush-mount housing resists corrosion in outdoor and high-moisture installs.

Camden

SKU: CM-1230

Camden CM-1230 Key Switch SPDT Maintained Contact

• SPDT maintained contact holds N/O and N/C outputs until key returns to neutral.
• 30VDC rating integrates directly with standard electric strikes and mag-lock supplies.
• One-piece cast stainless steel body suits corrosive, wet, or salt-air environments.