Camden

SKU: CX-RIM-SB

Camden Aluminum surface mounted adapter box for - CX-RIM-SB

• Eliminates strike alignment guesswork on double-door RIM assemblies via included jig.
• Compatible with CX-EPD1289L and CX-EPD1299L electric RIM strikes for predictable fit.
• Aluminum surface-mount housing (9.19" × 1.97" × 1.25") ships with full fastener kit.

Camden

SKU: CX-ESP2

Camden ANSI Round 4 7/8\" X 1 1/4\" stainless steel - CX-ESP2

• ANSI 4 7/8" × 1¼" profile drops into standard strike pockets with no frame modification.
• Stainless steel housing resists corrosion, reducing maintenance cycles on high-traffic entries.
• Runs directly off access control panel relay outputs—no auxiliary power modules required.

Camden

SKU: CX-ESP1

Camden ANSI Square 4 7/8\" X 1 1/4\" - CX-ESP1

• ANSI 4 7/8" × 1 1/4" form factor fits standard North American frames without custom cuts.
• TCP/IP integration enables remote unlock commands and audit logging across multi-door deployments.
• Fail-secure design keeps doors locked on power loss, meeting life-safety egress code requirements.

Camden

SKU: CX-ESP1B

Camden ANSI Square 4 7/8\" x 1 1/4\" stainless steel - CX-ESP1B

• ANSI 4 7/8" x 1 1/4" footprint drops into standard commercial frames without custom milling.
• TCP/IP native communication connects directly to networked access panels, no converters needed.
• Stainless steel construction withstands corrosion in coastal, dock, and washdown environments.

Camden

SKU: CX-MA1212

Camden Armature Housing for 1 200 lb. Magnetic Lock - CX-MA1212

• Armature housing for 1200 lb single-door magnetic lock systems
• Mechanical strike interface between door and Camden mag lock
• Drops onto standard Camden 1200 lb single-door mag lock hardware

Camden

SKU: CV-CSA

Camden AWID format prox. cards clam shell style package - CV-CSA

• 125kHz HID encoding ensures drop-in compatibility with existing Wiegand and OSDP readers.
• 10-card clamshell pack simplifies bulk procurement and protects credentials during storage.
• 3-year manufacturer warranty covers all 10 credentials against factory defects.

Camden

SKU: CM-450R/12FE

Camden Bilingual Mushroom Push button, single gang, stainless steel...

Stainless steel mushroom button with bilingual interface for networked access

• HID credential support with TCP/IP communication for integrated control systems
• Single-gang stainless steel construction fits standard wall boxes
• Bilingual interface for multi-language access control environments

Camden

SKU: CV-603PS-K1

Camden Cabinet with MProx-BLE controller 12 VDC - CV-603PS-K1

• Controls up to 20 independent door circuits with electric strike hardware on one node.
• Single reader input accepts MIFARE, HID, and 125kHz prox cards, eliminating credential silos.
• Wiegand and RS-485 dual communication supports flexible multi-zone wiring topologies.

Camden

SKU: CV-603PS

Camden Cabinet with MProx-BLE controller 12 VDC 1.5 - CV-603PS

• Manages up to 20 independent door strikes from a single centralized cabinet.
• Supports MIFARE, HID, and 125kHz credentials, preserving existing card infrastructure.
• Wiegand and RS-485 interfaces enable reliable reader integration over extended cable runs.

Camden

SKU: CM-9600/C

Camden Cable for remote activation/control of switch - CM-9600/C

• Enables remote activation of electric strikes, maglocks, and door operators at 24VDC.
• Field-selectable N/O and N/C contacts support fail-safe or fail-secure configurations.
• Relay rated 2A @ 30VDC; compatible exclusively with CM-9600 and CM-9610 series switches.

Camden

SKU: CI-3BXL

Camden CI-3BXL Electronic Door Lock with Key Override

• Key lockout blocks manual entry when electronic access is active, preventing bypass.
• Accepts 12V or 24V supply, fitting directly into existing access control panel wiring.
• Fail-safe or fail-secure mode is field-selectable to match site egress requirements.

Camden

SKU: CM-1000

Camden CM-1000 Surface Mount Key Switch SPST Momentary

• SPST momentary N/O contact rated 30VDC integrates directly with standard maglock and strike circuits.
• Accepts 1", 1-1/8", or 1-1/4" mortise cylinders — no set screws needed, simplifying field rekeying.
• Die-cast aluminum body with rubber gasket seals the switch for reliable indoor/outdoor deployment.

Camden

SKU: CM-1000/50

Camden CM-1000/50 Cylinder Lock Ring

TCP/IP cylinder lock ring for networked access control up to 50 users

• 30VDC operation integrates with TCP/IP-based systems for centralized management
• Supports 50 concurrent users across distributed authentication architectures
• Cylinder lock ring design compatible with standard door control modules

Camden

SKU: CM-1005

Camden CM-1005 Surface Mount Key Switch SPST Momentary

Surface-mount key switch for HID access control at 30VDC

• SPST momentary switch with normally closed contact for door strikes
• 30VDC operation integrates directly into HID-based systems
• Wall-mounted design suits retrofit installations in commercial security

Camden

SKU: CM-1010

Camden CM-1010 Surface Mount Key Switch SPST Maintained

• Maintained SPST contact holds electric strikes and mag locks without manual reset.
• 30VDC rating directly drives strike coils and relay loads—no stepping relay needed.
• Surface-mount die-cast aluminum housing installs on existing frames without cutouts.

Camden

SKU: CM-1050

Camden CM-1050 Surface Mount Key Switch SPDT Momentary

• Dual SPDT momentary contacts rated 30VDC reset to neutral on key release—no latch logic needed.
• Die-cast 1/4-inch aluminum body with rubber gasket supports indoor and outdoor surface mounting.
• Accepts standard 1–1¼-inch mortise cylinders, fitting common commercial keying systems.