Potter products
-
Potter
SKU: PAAR-B
Potter PAAR-B Monitored Automatic Air Release
Monitored automatic air release for fire suppression systems
- Integrated status feedback enables fault detection via standard FACP connections.
- Automatic air venting maintains suppression system pressure without manual intervention.
- Compact design supports equipment room and cabinet mounting in space-constrained installs.
$2,461.00 $1,279.99 Save $1,181.01The item has been added -
Potter
SKU: OSYSU-EX-O
Potter OSYSU-EX-O Outdoor Explosion Proof OS&Y
Explosion-proof OS&Y valve for hazardous outdoor fire suppression
- Explosion-proof design meets hazardous location codes for Class I and Class II sites.
- IP66-rated housing resists dust ingress and high-pressure water jets in outdoor installs.
- OS&Y configuration gives visual stem position confirmation without opening the valve body.
$2,702.50 $1,380.99 Save $1,321.51The item has been added -
Add to Cart The item has been addedPotter
SKU: MRS
Potter MRS Main Reserve Switch
Key-operated main/reserve selector for fire suppression control systems
- DPDT relay switches two signal pairs simultaneously, eliminating dead time during main/reserve changeover.
- 1 A @ 40 VDC contact rating suits low-voltage fire alarm panel and solenoid valve control circuits.
- Runs on 24 VDC at 10 mA, integrating directly into standard fire alarm panel power supplies.
$117.99The item has been added -
Add to Cart The item has been addedPotter
SKU: MPEX
Potter MPEX Series Manual Fire Alarm Station
Mechanical pull-lever station for conventional fire alarm panels, no power needed
- Mechanical pull-lever activation requires no power, network, or software to trigger.
- Hard-wired conventional circuit integrates directly into monitored alarm zones on standard panels.
- Compact 6.4" × 3.1" × 4.1" form factor fits standard backboxes in commercial and industrial installs.
$1,258.00 $872.99 Save $385.01The item has been added -
Add to Cart The item has been addedPotter
SKU: IDC-6
Potter IDC-6 Initiating Device Circuit Expander
IDC expander for Potter panels—add detector zones without replacing hardware
- Slots into Potter panel expansion bays to add IDC zones without replacing hardware.
- Mounts in panel, accessory cabinet, AE-2, AE-8, or AE-14 for flexible deployment.
- Rated for 32°–120°F operation, supporting smoke, heat, and pull-station circuits.
$580.90 $366.99 Save $213.91The item has been added -
Potter
SKU: FSBS
Potter FSBS Flowswitch Bypass Switch
Bypass switch for flowswitch circuits in wet, dry, and pre-action systems
- Isolates flowswitch circuits for maintenance without shutting down the full system.
- Compatible with wet-pipe, dry-pipe, and pre-action sprinkler system architectures.
- Compact form factor supports panel-mount or remote installation in control enclosures.
$329.25 $167.99 Save $161.26The item has been added -
Potter
SKU: FSB-24
Potter FSB-24 Switch Board
24-zone fire alarm switch board for Potter system control rooms
- Manages 24 discrete fire alarm zones from a single rack-mounted switch board.
- Rack-mount form factor fits standard control room enclosures; bracket included.
- Supports up to 4 boards per FFT-1000R/FFT-1000L for scalable zone expansion.
$500.35 $310.99 Save $189.36The item has been added -
Potter
SKU: FIB-1000
Potter FIB-1000 Fiber Interface Bridge
Fiber optic bridge converts electrical signals for extended-range security
- Converts electrical signals to fiber optic, eliminating EMI on long copper runs.
- Bidirectional signal conversion maintains integrity across electrical-to-optical boundary.
- Rack-mountable; fits panel, accessory cabinet, or PSN-1000/E Power Supply enclosure.
$1,426.00 $908.99 Save $517.01The item has been added -
Potter
SKU: FFT-TC
Potter Firefighter Telephone Cabinet
Commercial firefighter telephone cabinet for code-compliant emergency access
- Purpose-built enclosure houses firefighter telephone components in one dedicated cabinet.
- Integrates with existing fire alarm and emergency communication systems for unified deployment.
- Code-compliant design supports emergency communication protocols required during active fire events.
$614.85 $381.99 Save $232.86The item has been added -
Potter
SKU: FFT-RFH
Potter Firefighter Telephone Remote Handset
Remote handset assembly for Potter firefighter telephone systems
- Extends Potter firefighter telephone coverage to remote stations beyond the main unit.
- Enables multi-location voice access for emergency personnel across distributed facilities.
- Integrates directly into existing Potter telephone system architecture with no extra hardware.
$396.30 $246.99 Save $149.31The item has been added -
Potter
SKU: FFT-EXP
Potter Firefighter Telephone Expander Module
Expand FFT-1000 phone circuits up to 12 Class B lines per module
- Adds 12 Class B or 6 Class A phone circuits per module to the FFT-1000 system.
- Connects via F-Link and Voice terminals—no protocol gateways or converters needed.
- Draws only 56 mA, so cascading multiple modules has minimal power supply impact.
$929.25 $577.99 Save $351.26The item has been added -
Potter
SKU: FCB-1000
Potter FCB-1000 Fire Communications Bridge
Fire alarm to voice system bridge for emergency coordination
- Bridges fire alarm panels to emergency voice systems for coordinated evacuation.
- UUKL Listed for Smoke Control, meeting life safety compliance requirements.
- Rack-mount form factor simplifies integration into existing infrastructure.
$1,029.45 $655.99 Save $373.46The item has been added -
Potter
SKU: CPS-24
Potter CPS-24 Photoelectric Smoke Detector
Photoelectric in-duct smoke detector, 24VDC, low-profile 2" design
- Photoelectric light-scattering sensor reduces false alarms from duct dust and steam.
- Runs on 24VDC at 59μA standby, minimizing power-supply load across multi-detector runs.
- 2" low-profile housing fits tight plenum spaces; 2- or 4-wire base suits legacy or supervised panels.
$72.70 $47.99 Save $24.71The item has been added -
Potter
SKU: CO1224T
Potter CO1224T Carbon Monoxide Detector
Supervised wall-mount CO detector with zone reporting for commercial systems
- Supervised loop architecture alerts the panel instantly if the detector fails or is removed.
- Zone-level CO reporting pinpoints the affected location, cutting response time in large facilities.
- Compact 5.1"×3.3"×1.3" wall/ceiling form factor suits retrofit and new commercial installations.
$149.10 $91.99 Save $57.11The item has been added -
Potter
SKU: CAM
Potter CAM Class A Output Module
Relay-based Class A output module for door strike and accessory control
- Relay-based Class A output drives door strikes and accessories at 12V or 24V DC.
- Wiegand protocol support enables direct integration with standard credential readers.
- Hardwired I/O architecture removes network dependency for critical door control functions.
$81.75 $46.99 Save $34.76The item has been added -
Potter
SKU: CA2Z
Potter CA2Z Class A Initiating Module
Class A initiating module converts 4 Class B circuits for PFC panels
- Converts four Class B initiating circuits to supervised Class A operation.
- Built-in 5.1k EOL resistor eliminates external resistor packs and reduces wiring complexity.
- 8-pin header mounts directly to PFC-4410RC and PFC-4410G3 panels using included hardware.
$61.99The item has been added -
Add to Cart The item has been addedPotter
SKU: CA-6500
Potter CA-6500 Class A Expander
Class A expander for six NAC circuits plus P-Link and SLC
- Six Class A NAC circuits provide bidirectional fault detection, eliminating single-point failures.
- UUKL listing confirms compliance for smoke control in life-safety code-governed installations.
- 60 mA standby draw minimizes battery load, extending UPS runtime across distributed panel builds.
$821.65 $523.99 Save $297.66The item has been added -
Potter
SKU: CA-6075
Potter CA-6075 Class A Expander for PFC-6075
Class A expander module for Potter PFC-6075 control panels
- Class A (Style 4) loop provides redundant communication paths for enhanced circuit reliability.
- Verified interoperability with PFC-6075 panels simplifies installation and staged expansion.
- UUKL Listed for Smoke Control and backed by a 5-year manufacturer warranty.
$323.60 $206.99 Save $116.61The item has been added -
Potter
SKU: CA-4064
Potter CA-4064 Class A Expander for PFC-4064
Class A expander for Potter PFC-4064 fire alarm panels
- Class A supervised wiring ensures fault-tolerant operation if one circuit leg fails.
- Expands addressable device and zone capacity on PFC-4064 panels without panel replacement.
- Compact 4" × 6" × 1" form factor simplifies retrofit installs; backed by a 5-year warranty.
$283.60 $180.99 Save $102.61The item has been added -
Potter
SKU: BVL
Potter Bleeder Valve for Fire Sprinkler System
Manual brass bleeder valve for wet and dry sprinkler systems
- Brass construction resists corrosion in wet environments for long service life.
- Standard pipe thread connections integrate with industry-standard riser and branch piping.
- Tool-free hand operation enables air elimination during fill, prime, and maintenance cycles.
$155.50 $77.99 Save $77.51The item has been added
