Lifesafety Power

Lifesafety Power

SKU: FPO150/250-E2

Lifesafety Power FPO150/250-E2 FPO150/250-E2

• Delivers 150W base capacity (12A @ 12V or 6A @ 24V) for cameras, access control, and alarms.
• Expands to 250W (20A @ 12V or 10A @ 24V) via add-on module—no enclosure replacement required.
• DIN-rail compatible for clean integration into control rooms and MDF closet installations.

Lifesafety Power

SKU: FPO150/250-2C82D8PE8V

Lifesafety Power FPO150/250-2C82D8PE8V Power supply board 150W

• Delivers 12A at 12VDC or 6A at 24VDC to support mixed-voltage endpoint loads.
• Dual-output design powers 12V and 24V devices from a single 150W board.
• Board-level form factor integrates into modular rack enclosures for distributed power.

Lifesafety Power

SKU: FPO75-B100C4D8E2M

Lifesafety Power FPO75-B100C4D8E2M FPO75-B100C4D8E2M

• Dual 12V/2A and 24V/2A outputs support mixed-voltage reader and lock deployments.
• 4 fused lock outputs and 8 fused auxiliary outputs provide per-circuit overcurrent protection.
• 75W total capacity in a 20×16×4.5-in enclosure sized for standard cabinet rail mounting.

Lifesafety Power

SKU: FPO75-D8E4M

Lifesafety Power FPO75-D8E4M FPO75-D8E4M

• 75W redundant supply eliminates single points of failure in distributed security installs.
• Dual independent AC input channels auto-switch on failure without dropping the connected load.
• Fits access control and surveillance power distribution architectures requiring redundancy.

Lifesafety Power

SKU: FPO150/250-C8D8E4

Lifesafety Power FPO150/250-C8D8E4 FPO150/250-C8D8E4

• Dual isolated 8A outputs prevent a single circuit failure from cascading to other loads.
• Supervised battery backup circuits alert operators immediately to AC loss or battery degradation.
• DIN-rail mountable enclosure integrates directly into standard security cabinets and control rooms.

Lifesafety Power

SKU: FPO75-D8E2M

Lifesafety Power FPO75-D8E2M FPO75-D8E2M

• 75W UPS capacity sustains access control readers, locks, and intercoms during AC failure.
• Compact wall-mount form factor fits tight ceiling and wall cavities in small-to-medium installs.
• Battery backup operation maintains power continuity for light-duty surveillance equipment on-site.

Lifesafety Power

SKU: FPO150/250-2C8P2D8PE4M1

Lifesafety Power FPO150/250-2C8P2D8PE4M1 FPO150/250-2C8P2D8PE4M1

• Dual independent output channels power separate subsystems from one enclosure.
• Reduces single-point-of-failure risk across multi-zone security deployments.
• Rack- or wall-mountable design simplifies distributed access control installations.

Lifesafety Power

SKU: FPO150/150-2C8P2D8PE8M1

Lifesafety Power FPO150/150-2C8P2D8PE8M1 FPO150/150-2C8P2D8PE8M1

• Dual isolated outputs let you segregate camera and reader/lock circuits in one enclosure.
• 150W total capacity supports multiple IP cameras, access readers, and auxiliary devices.
• Centralized power distribution reduces field wiring complexity in rack or wall-mount cabinets.

Lifesafety Power

SKU: FPO150-B100C8PE4M1

Lifesafety Power FPO150-B100C8PE4M1 FPO150-B100C8PE4M1

• 150W managed supply centralizes power for 4–8 camera circuits in one unit.
• Per-channel fault isolation prevents a single load failure from taking down adjacent circuits.
• Accepts AC 110–240V input, suitable for standard commercial building infrastructure.

Lifesafety Power

SKU: FPO75-B100C4PD8E4V

Lifesafety Power FPO75-B100C4PD8E4V FPO75-B100C4PD8E4V

• 75W enclosed supply supports distributed IP camera and access control power loads.
• Fits wall-mount, DIN-rail, or cabinet installations for flexible deployment.
• Distributed sourcing reduces voltage drop on long cable runs and isolates circuit loads.

Lifesafety Power

SKU: FPO150-B100C8E4M

Lifesafety Power FPO150-B100C8E4M FPO150-B100C8E4M

Lifesafety Power

SKU: FPO75-B100E1M

Lifesafety Power FPO75-B100E1M FPO75-B100E1M

• Delivers 75W of regulated DC output to keep cameras, switches, and controllers stable.
• Designed for commercial and industrial security deployments requiring clean, protected power.
• Mount in a ventilated enclosure; verify load budget and wire gauge before installation.

Lifesafety Power

SKU: FPO250/250-2C8P2D8PE4

Lifesafety Power FPO250/250-2C8P2D8PE4 FPO250/250-2C8P2D8PE4

• Dual 250W channels deliver independent 12V and 24V rails for mixed-voltage deployments.
• 16 lock outputs and 16 auxiliary outputs, each Class 2 power-limited at 2.5A max.
• Wall-mount E4 enclosure suits electrical closets in commercial, healthcare, and hospitality sites.

Lifesafety Power

SKU: FPO75-D8E4V

Lifesafety Power FPO75-D8E4V FPO75-D8E4V

• Distributes 12V DC across 8 independent fused outputs, protecting each circuit individually.
• 75W / 6A capacity offloads door strikes and sensors from your main camera or NVR PSU.
• E4V enclosure (24×20×4.5 in) mounts on 19-in rack rails or wall in any equipment room.

Lifesafety Power

SKU: FPO150-2D8E4V1

Lifesafety Power FPO150-2D8E4V1 FPO150-2D8E4V1

• 150W at 12V DC sustains cameras and access control during mains failure.
• 16 fused auxiliary outputs isolate faults per circuit, preventing system-wide outages.
• E4V1 steel enclosure (24"H × 20"W × 4.5"D) fits standard commercial cabinet footprints.

Lifesafety Power

SKU: FPO150-2D8E4P

Lifesafety Power FPO150-2D8E4P FPO150-2D8E4P

• 150W dual-output design powers two independent subsystems from one supply point.
• Redundant architecture eliminates single points of failure in mid-scale deployments.
• Panel-mount form factor fits security racks, access control nodes, and surveillance hubs.

Lifesafety Power

SKU: FPO250-4D8E8P

Lifesafety Power FPO250-4D8E8P FPO250-4D8E8P

• 250W supervised supply delivers four independent 12VDC channels for zoned load management.
• Per-channel supervision detects low-voltage faults before field devices fail in multi-zone sites.
• Battery backup integration supports emergency holdover for access control and lock continuity.

Lifesafety Power

SKU: FPO250-B100C8D8E2

Lifesafety Power FPO250-B100C8D8E2 FPO250-B100C8D8E2

• Eight independently fused 3A outputs prevent a single fault from cascading across the system.
• Supplies 12V/4A and 24V/8A from one chassis, covering cameras, locks, and readers together.
• Front-accessible fuses on a 35mm DIN rail allow fast replacement without rewiring.

Lifesafety Power

SKU: FPO75/150-C8PD8PE4M1

Lifesafety Power FPO75/150-C8PD8PE4M1 FPO75/150-C8PD8PE4M1

• 225W modular enclosure centralizes 12V/24V distribution across multi-zone access systems.
• Eight relay-driven outputs independently feed door locks, strikes, or Class 2 signaling devices.
• Class 2 power-limited outputs simplify code compliance for downstream access-control devices.

Lifesafety Power

SKU: FPO75-C4PE1

Lifesafety Power FPO75-C4PE1 FPO75-C4PE1

• Four independent 2.5A Class 2 outputs let you supervise one lock circuit per door.
• Selectable 12VDC/6A or 24VDC/3A output suits most electric strike and mag-lock loads.
• NEMA 1 E1 enclosure mounts directly in control rooms or secure equipment cabinets.