Lifesafety Power products
-
Save $633.01
Lifesafety Power FPO150-2D8E8A 150W 12V/24V
150W rack-mount power supply board designed to distribute 12V or 24V DC across access control systems, door locks, badge readers, and low-power
- Delivers 12A at 12V or 6A at 24V from a single 150W main output.
- 16 independently fused 3A auxiliary outputs prevent single-load failures from cascading.
- Mounts directly to AMAG backplates for clean integration into existing access control racks.
Usually Ships in 2-3 Weeks Free shipping over $499$1,847.00 $1,213.99 Save $633.01 -
Save $486.01
Lifesafety Power FPO150-2D8E6S 150W 120 VAC
150-watt single-voltage (120 VAC input) power distribution unit with 16 auxiliary outputs, designed for small-to-medium surveillance, access control
- 150W at 120 VAC input powers 16 auxiliary outputs from a single hardwired source.
- Supports 12 VDC and 24 VDC low-voltage devices including cameras, locks, and readers.
- Consolidates branch power distribution, eliminating sub-panels at each device location.
Usually Ships in 2-3 Weeks Free shipping over $499$1,419.00 $932.99 Save $486.01 -
Save $503.01
Lifesafety Power FPO150-2D8E6P FPO150-2D8E6P
150W enclosed power distribution unit designed for multi-zone access control and surveillance installations where equipment failures and short
- Selectable 12V/12A or 24V/6A primary output covers mixed-voltage deployments from one SKU.
- 16 independently fused 3A auxiliary circuits isolate faults so one short won't drop adjacent loads.
- Paxton back-plate compatible; 23×32×6.5-inch footprint fits cabinets, closets, and wall mounts.
Usually Ships in 2-3 Weeks Free shipping over $499$1,468.00 $964.99 Save $503.01 -
Save $562.01
Lifesafety Power FPO150-2D8E6M1 150W 12A/12V
150W industrial power supply designed for distributed surveillance and access control deployments where you need flexible voltage and output
- Dual-voltage primary (12V/12A or 24V/6A) adapts to cable-run length without swapping units.
- 8 independently fused 3A aux outputs prevent a single short from collapsing the entire supply.
- Per-channel Bus1/Bus2 routing isolates camera power from access-control loads on one PSU.
Usually Ships in 2-3 Weeks Free shipping over $499$1,638.00 $1,075.99 Save $562.01 -
Save $257.01
Lifesafety Power FPO150-2D8E4 150W PS 12A/12V or 6A/24V 16 DC
150W regulated power supply purpose-built for access control and door hardware installations that require simultaneous 12V and 24V rails
- Dual-rail output (12A/12V or 6A/24V) eliminates a second supply in mixed-voltage panels.
- 16 independently fused 3A DC outputs enable zone-level distribution without daisy-chaining.
- Per-output Bus1/Bus2 routing allows load rebalancing without rewiring the panel.
Usually Ships in 2-3 Weeks Free shipping over $499$751.00 $493.99 Save $257.01 -
Save $767.01
Lifesafety Power FPO150-2C8P2D8PE8M1 150W 12V/24V
150W power supply board (PSB) designed for distributed access control, door lock, and auxiliary device power in mid-to-large deployments
- 150W power supply with selectable 12V/12A or 24V/6A output
- 16 relay lock control outputs (Class 2 power-limited)
- Centralizes power distribution for multi-door installs
Usually Ships in 2-3 Weeks Free shipping over $499$2,236.00 $1,468.99 Save $767.01 -
Save $289.01
Lifesafety Power FPO150-2C8E2 150W Power Supply
150W power supply designed to feed access control systems, lock controllers, and auxiliary security devices that demand switchable 12V or 24V output
- Delivers 12A at 12VDC or 6A at 24VDC from a single 150W regulated output.
- 16 individually fused 3A relay outputs prevent a single short from cascading failures.
- Each relay output is selectable failsafe or failsecure for strikes, mag locks, and solenoids.
Usually Ships in 2-3 Weeks Free shipping over $499$843.00 $553.99 Save $289.01 -
Save $469.01
Lifesafety Power FPO150-2C82D8E4M1 FPO150-2C82D8E4M1
150W enclosure-mounted power distribution system engineered for multi-door access control deployments
- Field-selectable 12V/24V output eliminates separate supplies for mixed lock hardware.
- 16 independently fused relay outputs prevent a single fault from cascading to other circuits.
- 16 auxiliary outputs isolate reader and REX power from relay switching noise across 32 loads.
Usually Ships in 2-3 Weeks Free shipping over $499$1,369.00 $899.99 Save $469.01 -
Save $358.01
Lifesafety Power FPO150-2C82D8E4 16 Lock 16 Aux Outputs
Fused power distribution module designed to control door locks and auxiliary devices from a single power supply
- 16 dedicated lock outputs and 16 auxiliary outputs consolidate multi-door power in one module.
- Each channel is individually fused at 3A, isolating faults so one short won't drop other circuits.
- Supports mag locks, solenoids, strikes, sirens, and relay loads within the 3A per-channel limit.
Usually Ships in 2-3 Weeks Free shipping over $499$1,044.00 $685.99 Save $358.01 -
Save $640.01
Lifesafety Power FPO150/250-C8P2D8PE6M FPO150/250-C8P2D8PE6M
Managed power distribution unit designed to centralize and condition power for multi-camera surveillance installations
- Centralizes 24VAC power distribution across 8+ supervised channels in one enclosure.
- Per-channel fault isolation prevents a single load failure from masking system-wide faults.
- Battery backup coordination sustains critical loads during mains failure for clean NVR handoff.
Usually Ships in 2-3 Weeks Free shipping over $499$1,867.00 $1,226.99 Save $640.01 -
Save $761.01
Lifesafety Power FPO150/250-C8P2D8PE8M 150W 12A/12V or 6A/24V
Dual-output DC power supply designed for distributed access control and door-lock management across mid-to-large installations
- Dual outputs deliver 150W (12A/12V or 6A/24V) and 250W (20A/12V or 10A/24V) in one chassis.
- 8 relay lock outputs are individually configurable for failsafe, failsecure, or FAI — no jumpers.
- 16 auxiliary Class 2 outputs at 2.5A each support dual-bus sequencing for readers, cameras, and strobes.
Usually Ships in 2-3 Weeks Free shipping over $499$2,218.00 $1,456.99 Save $761.01 -
Save $511.01
Lifesafety Power FPO150/250-C8D8PE4M1 400W Dual
Modular unified power supply designed for mid-to-large access control installations requiring dual voltage operation, fault tolerance, and integrated
- 400W dual-voltage output supports failsafe mag locks and failsecure strikes from one unit.
- 8 relay lock outputs and 8 aux outputs eliminate external modules across multi-door deployments.
- Integrated fire alarm disconnect meets NFPA 101 egress requirements without an external relay.
Usually Ships in 2-3 Weeks Free shipping over $499$1,490.00 $978.99 Save $511.01 -
Save $765.01
Lifesafety Power FPO150/250-C8D8E8M 250W
250W power supply board (PSB) designed for distributed access control and door lock systems in commercial buildings
- Selectable 20A/12V or 10A/24V output reduces voltage drop on long cable runs.
- 8 relay lock outputs, each fused at 3A, isolate faults so one shorted door stays offline.
- Mounts directly to Mercury and Lenel backplates—no adapter plate or custom harness needed.
Usually Ships in 2-3 Weeks Free shipping over $499$2,232.00 $1,466.99 Save $765.01 -
Save $623.01
Lifesafety Power FPO150/250-B1002C8P2D8PE4M1 Unified Power
400W Mercury Unified Power Supply designed to distribute and manage power across access control, security intercom, and surveillance system
- Centralized 400W distribution eliminates separate power runs to each endpoint.
- 16 relay lock outputs and 16 auxiliary outputs support multi-door access deployments.
- 120V AC input integrates directly into standard hardwired security enclosures.
Usually Ships in 2-3 Weeks Free shipping over $499$1,816.00 $1,192.99 Save $623.01 -
Save $587.01
Lifesafety Power FPO150/250-2D8E6S 150W/250W
N industrial-grade power supply engineered for multi-circuit access control and alarm system deployments
- Selectable 12A/12V or 6A/24V primary output accommodates mixed-voltage panel designs.
- 16 independently fused 3A auxiliary circuits isolate faults without disrupting remaining outputs.
- E6 enclosure (30H×23W×6.5D in.) fits standard rack-mount and wall-cavity installations.
Usually Ships in 2-3 Weeks Free shipping over $499$1,712.00 $1,124.99 Save $587.01 -
Save $664.01
Lifesafety Power FPO150/250-2D82M8NLCE4 150W Power Supply
Configurable power supply designed for security and life-safety systems requiring redundant or scalable 12VDC and 24VDC distribution
- Selectable 150W/250W capacity supports 12VDC or 24VDC mixed-voltage load deployments.
- Eight independently fused 3A outputs prevent cascading failures across cameras and readers.
- Field-selectable Bus1/Bus2 per output enables N+1 or parallel redundancy in one enclosure.
Usually Ships in 2-3 Weeks Free shipping over $499$1,936.00 $1,271.99 Save $664.01 -
Save $382.01
Lifesafety Power FPO150/250-2C8PE2 150W 12A/12V or 6A/24V
150W Class 2 power-limited auxiliary supply designed for mid-scale access control, fire alarm, and surveillance installations requiring centralized
- Delivers 12A at 12V or 6A at 24V across eight individually addressable DC outputs.
- Each output sources up to 2.5A with Bus1/Bus2 selectivity for load balancing.
- Class 2 power-limited design eliminates field current-limiting devices, cutting BOM cost.
Usually Ships in 2-3 Weeks Free shipping over $499$1,114.00 $731.99 Save $382.01 -
Save $773.01
Lifesafety Power FPO150/250-2C8P2D8PE6V1 150W Board
Board-level 150W power supply rated for 12VDC output at 12A (primary channel) or dual 6A channels — designed for compact cabinet integration in
- Delivers 150W at 12VDC/12A to power cameras, controllers, and aux devices from one rail.
- Dual 6A channels with independent protection prevent a single fault from cascading across zones.
- Board-mount form factor integrates directly into compact OEM cabinets and custom enclosures.
Usually Ships in 2-3 Weeks Free shipping over $499$2,253.00 $1,479.99 Save $773.01 -
Save $864.01
Lifesafety Power FPO150/250-2C8P5D8PE8M2 150W PS
Configurable DC power supply designed for distributed access control and life safety installations where multiple door locks, badge readers, and
- Dual-voltage output (12V/24V selectable) eliminates separate distribution modules on multi-door sites.
- 16 relay lock outputs, each independently set failsafe or failsecure, covering up to 16 door pairs.
- 40 auxiliary Class 2 outputs isolate reader and sensor loads from lock circuits, reducing nuisance releases.
Usually Ships in 2-3 Weeks Free shipping over $499$2,520.00 $1,655.99 Save $864.01 -
Save $863.01
Lifesafety Power FPO150/250-2C8P4D8PE8M FPO150/250-2C8P4D8PE8M
Dual-output supervised power supply designed for fire alarm, access control, and security system integration where circuit supervision and redundancy
- Dual-voltage output (12VDC/2.5A or 24VDC/1.5A) eliminates separate SKUs for mixed installs.
- Eight independently supervised outputs detect open-circuit and short-circuit faults automatically.
- Native supervision removes the need for additional relay modules in life-safety topologies.
Usually Ships in 2-3 Weeks Free shipping over $499$2,517.00 $1,653.99 Save $863.01