Lifesafety Power

Lifesafety Power · FPO75-C4PD8PE1M

Lifesafety Power FPO75-C4PD8PE1M Power supply board 75W 6A/12V

75W board-mount power supply configured for 6A at 12V or 3A at 24V — designed to feed access control systems, door locks, and auxiliary loads in

• Delivers 75W at 6A/12V or 3A/24V to support multi-door access control loads.
• Provides 4 relay lock outputs plus 8 auxiliary DC outputs, each class 2 limited at 2.5A.
• Mercury/Lenel backplate compatibility simplifies retrofit and new-build panel integration.

Lifesafety Power · FPO75-C4PD8PE1

Lifesafety Power FPO75-C4PD8PE1 75W 4 Lock Control

75W supervised power supply (SVPS) designed to power and manage distributed access control devices—door locks, strikes, magnetic locks, and auxiliary

• 75W total capacity supports 4 supervised lock control outputs from a single cabinet.
• 8 auxiliary outputs allow monitoring of relays, sensors, and secondary devices.
• Built-in supervision detects wiring faults, power loss, and tamper before doors fail.

Lifesafety Power · FPO75-C4E2M

Lifesafety Power FPO75-C4E2M Power Supply Board 75W

75W power supply board designed for access control and lock management in small-to-medium commercial installations

• Delivers 6A at 12V or 3A at 24V to power locks, readers, and relays from one board.
• Four relay outputs, each fused at 3A, isolate faults so one shorted lock won't cascade.
• Supports electric strikes, maglocks, and relay-driven door operators in commercial installs.

Lifesafety Power · FPO75-C4E2

Lifesafety Power FPO75-C4E2 Power Supply Board 75W

75W unified power supply board designed for access control systems requiring reliable, multi-zone power distribution

• 75W output with 4 relay lock outputs, each fused at 3A for independent zone protection.
• Fire alarm disconnect auto-unlocks doors on alarm signal, supporting life-safety compliance.
• Optional Netlink module enables network monitoring, remote battery testing, and cloud dashboard.

Lifesafety Power · FPO75-C4E1M

Lifesafety Power FPO75-C4E1M FPO75-C4E1M

75W managed power distribution unit designed for security installations requiring supervised, monitored output circuits

• Four independent supervised outputs isolate faults without disrupting remaining circuits.
• 75W capacity delivers regulated 12VDC or 24VDC across mixed access control and camera loads.
• Integrated battery backup supports continuity during brief outages on 120 VAC input systems.

Lifesafety Power · FPO75-C4E1-2DM2

Lifesafety Power FPO75-C4E1-2DM2 DMP Unified Power Sys

DMP-integrated power supply and battery management system designed for distributed access control, fire alarm, and intercom deployments across

• 75W output supports 4–6 EM locks with 4 independently fused 3A relay outputs.
• Integrated battery charger and low-battery cutoff eliminate external modules and prevent deep discharge.
• Automatic fire alarm disconnect triggers door unlock for code-compliant emergency egress.

Lifesafety Power · FPO75-C4D8PE4M/T4-B

Lifesafety Power FPO75-C4D8PE4M/T4-B Unified Power

Unified access control power platform combining regulated power distribution, battery backup, relay lock control, and auxiliary load management in a

• 75W, 12V/24V DC regulated output across 12 concurrent access points from one enclosure.
• 4 relay lock outputs with failsafe/failsecure per zone; supports strikes and buzzers together.
• Built-in fire alarm disconnect automatically releases doors for ADA-compliant emergency egress.

Lifesafety Power · FPO75-C4D8PE4M/T4-A

Lifesafety Power FPO75-C4D8PE4M/T4-A FPO75-C4D8PE4M/T4-A

75-watt uninterruptible power supply designed to maintain continuity in networked security systems during mains failure

Lifesafety Power · FPO75-C4D8PE4M

Lifesafety Power FPO75-C4D8PE4M 75W 120VAC

75W single voltage (120VAC input) power supply purpose-built for access control, lock, and surveillance equipment requiring reliable 24VDC

• 75W 24VDC output powers electric strikes, mag locks, and auxiliary sensors.
• 4 dry-contact relay outputs (NO/NC) enable independent zone switching per lock.
• 8 auxiliary circuits allow separate device groups without an added control layer.

Lifesafety Power · FPO75-C4D8PE2M/T4-A

Lifesafety Power FPO75-C4D8PE2M/T4-A 75W Power Supply

75W power distribution board designed for access control and security panel integration

• Delivers 75W at 6A/12V or 3A/24V to power locks, readers, and aux devices.
• Pre-wired Mercury harness (1502/MR52) connects to 4-door panels without extra termination.
• Four dedicated lock outputs plus 8 aux channels consolidate multi-door power distribution.

Lifesafety Power · FPO75-C4D8PE2M

Lifesafety Power FPO75-C4D8PE2M 75W 120VAC

75W single-voltage power supply rated for 120 VAC input, designed to feed access control systems, electric locks, and auxiliary surveillance

• 75W single-voltage supply consolidates power for multi-door access control deployments.
• 4 relay outputs switch mag locks, door strikes, or auxiliary devices from one unit.
• 8 auxiliary outputs support readers, sensors, and indicators on 120 VAC mains input.

Lifesafety Power · FPO75-C4D8PE1M

Lifesafety Power FPO75-C4D8PE1M 75W 6A/12V or 3A/24V

75W centralized power supply and relay controller designed for distributed access control and door locking infrastructure

• Selectable 12V/6A or 24V/3A output matches lock voltage without extra SKUs.
• Four 3A-fused relay outputs with per-relay FAI, failsafe, or failsecure logic.
• Eight Class 2 aux DC outputs power readers and sensors on Bus1 or Bus2.

Lifesafety Power · FPO75-C4D8E2P

Lifesafety Power FPO75-C4D8E2P 75W Dual Voltage

75-watt regulated power supply designed for access control and life-safety installations

• Delivers 12VDC/6A or 24VDC/3A to power locks, readers, and cameras from one unit.
• Four relay lock outputs support FAI, failsafe, or failsecure modes — each fused at 3A.
• Eight auxiliary DC outputs with Bus1/Bus2 selection eliminate external switching modules.

Lifesafety Power · FPO75-C4D8E2M

Lifesafety Power FPO75-C4D8E2M 75W Power Supply

75-watt regulated power supply board designed to support networked security equipment and access control systems

• Selectable 12VDC/6A or 24VDC/3A output supports legacy and modern endpoints.
• Four onboard relay outputs eliminate external relay modules in lock and alarm circuits.
• 75W regulated board consolidates auxiliary power for badge readers and solenoid strikes.

Lifesafety Power · FPO75-C4D8E2

Lifesafety Power FPO75-C4D8E2 : Power supply board 75W 6A/12V

• Four independent channels each supply 12VDC or 24VDC, supporting mixed-voltage door hardware.
• 75W total capacity handles up to four electromagnetic locks and readers from one board.
• Fits 19-inch rack or wall enclosures at 20H × 16W × 4.5D in., simplifying centralized deployment.

Lifesafety Power · FPO75-C4D8E1PDK

Lifesafety Power FPO75-C4D8E1PDK 75W 6A/12V or 3A/24V

75W regulated power supply engineered for multi-door access control systems where lock control flexibility and distributed auxiliary power are

• Selectable 6A/12V or 3A/24V output matches site voltage standard without rewiring.
• Four independent relays support mixed failsafe, failsecure, or FAI lock types per door.
• Eight fused auxiliary DC outputs eliminate a separate supply for readers and REX devices.

Lifesafety Power · FPO75-C4D8E1

Lifesafety Power FPO75-C4D8E1 75W 4 Lock Control Out

75-watt supervised power supply designed for access control systems and integrated security installations requiring simultaneous lock control and

• 75W SVPS capacity drives 4 lock outputs and 8 aux channels from a single unit.
• Supervised design includes backup power and tamper monitoring for fault reporting.
• E1 cabinet-rated; 12V DC aux feeds readers, relays, and sensors across multi-door sites.

Lifesafety Power · FPO75-B100M8PNLCE4M/T4-A

Lifesafety Power FPO75-B100M8PNLCE4M/T4-A 75W 6A

75W managed power distribution module built for multi-camera surveillance installations where you need regulated output to multiple devices from a

• Delivers 75W with 6A at 12V or 3A at 24V to support multi-device DC loads.
• 8-outlet distribution block caps each branch at 2.5A, preventing individual overloads.
• Class 2 power-limited outputs allow lighter 18–20 AWG wiring on runs under 100 ft.

Lifesafety Power · FPO75-B100M8PNLCE2M

Lifesafety Power FPO75-B100M8PNLCE2M 75W power supply 6A/12V

75-watt managed power supply with an integrated 8-output distribution panel rated at 2.5A per channel

• 8 independent 2.5A-limited channels protect each camera circuit from single-point faults.
• Supports 12VDC at 6A or 24VDC at 3A to match existing on-site infrastructure voltage.
• Managed distribution eliminates per-line fuses, reducing junction-box complexity in the field.

Lifesafety Power · FPO75-B100M8NLCE2M

Lifesafety Power FPO75-B100M8NLCE2M 75W Power Supply

75W managed distribution power supply delivering either 6A at 12V or 3A at 24V — your choice depends on the voltage your security devices require

• Eight independently fused 3A outputs isolate faults to a single device or branch.
• Selectable 12V/6A or 24V/3A output supports cameras, readers, strikes, and maglocks.
• 75W managed distribution eliminates daisy-chained wall supplies across multi-device runs.