Multi-Sensor IP Cameras
Showing Results for Multi-Sensor IP Cameras
-
Pelco
SKU: IMD1-INCLD1
Pelco IMD1-INCLD1 Clear Lower Dome for Sarix Multi-Directional Cameras
Clear polycarbonate lower dome for Sarix multi-directional cameras
- IK10 vandal rating withstands 20J impact in high-traffic areas
- IR-optimized at 850nm for full night vision range without tint loss
- Fits Pelco Sarix in-ceiling camera systems with maximum light transmission
In stock · Ships same business day$79.49 $78.99 Save $0.50 -
Pelco
SKU: SBDE1-16V7-E2H-IR
Pelco SBDE1-16V7-E2H-IR Sarix Enhanced Duo 16MP Dual-Sensor Camera
Dual 8MP sensors, one housing—monitor two zones from single cable drop
- Independent motorized 3.24–7.33mm lenses zoom each 8MP head separately
- 30m integrated IR + 130dB WDR handle 24/7 low-light and backlit scenes
- H.265 compression cuts storage ~50% vs. H.264 for dual 8MP streams
In stock · Ships same business day$1,847.71 $1,409.99 Save $437.72 -
Pelco
SKU: SMLE1-12V5-4H
Pelco SMLE1-12V5-4H Sarix Multi 360° 4-Sensor Camera
360° 4-sensor dome—12MP total, one PoE+ cable, zero blind spots
- Four independent 90° sectors at 3MP each with varifocal 3.3–5.7mm lenses
- 130 dB SureVision WDR handles extreme contrast; H.265 compression halves storage
- IP66/IP67 rated, IK10 vandal-resistant, built-in IR, -40°C to +65°C operating range
In stock · Ships same business day$2,037.06 $1,489.99 Save $547.07 -
Pelco
SKU: SMLE1-15V5-3H
Pelco SMLE1-15V5-3H Sarix Multi Enhanced 3-Sensor 270° Panoramic Camera
Three 5MP heads, 270° coverage, single mount point for large spaces
- 15MP total resolution (5MP per head) with three independent video streams
- 270° panoramic view in three 90° sectors from one installation location
- 130dB SureVision WDR, PoE+ power, IP66/IP67 rated, IK10 vandal resistant
In stock · Ships same business day$1,963.94 $1,458.99 Save $504.95 -
Pelco
SKU: SMLE1-20V5-4H
Pelco SMLE1-20V5-4H Sarix Multi Enhanced 20MP 4-Sensor Dome
360° panoramic dome with four 5MP heads and varifocal lenses
- 20MP total resolution across four independent sensors with per-head analytics
- 3.3–5.7mm varifocal lens on each head for field-adjustable coverage after install
- IP66/IP67 rated, IK10 vandal-resistant, runs on PoE+ with H.265 compression
In stock · Ships same business day$2,209.23 $1,717.99 Save $491.24 -
Pelco
SKU: SMLE1-24V5-3H
Pelco SMLE1-24V5-3H Sarix Multi Enhanced 3-Sensor
270° panoramic 24MP multi-sensor dome with varifocal zoom
- 24MP across 3 independent heads with 3.3–5.7mm varifocal per sensor
- 130 dB SureVision WDR handles backlit and high-contrast scenes
- Single PoE+ connection, IP66/IP67 rated, IK10 vandal-resistant
In stock · Ships same business day$2,192.01 $1,628.99 Save $563.02 -
Pelco
SKU: SMLE1-32V5-4H
Pelco SMLE1-32V5-4H Sarix Multi Enhanced 32MP 4-Sensor Panoramic Camera
360° panoramic 32MP with four independent 5MP heads, no blind spots
- Four 5MP sensors capture simultaneous 360° coverage without stitching lag
- 3.3–5.7mm varifocal lens per head adjusts to your mounting geometry
- IP66/IP67 rated, IK10 impact resistant, built-in IR with 0.018 lux sensitivity
In stock · Ships same business day$2,645.03 $1,964.99 Save $680.04 -
Pelco
SKU: SMLE1-9V5-3H
Pelco SMLE1-9V5-3H Sarix Multi Enhanced 3-Sensor 270° Panoramic Camera
270° panoramic dome with three 3MP sensors and H.265 compression
- Three independent 90° sectors eliminate blind spots; single PoE+ connection
- 9MP total output with H.265 encoding cuts storage by ~50% vs H.264
- 3.3–5.7mm varifocal lens per head; 130dB SureVision WDR and built-in IR
$1,765.94 $1,291.99 Save $473.95 -
Pelco
SKU: UED22NA000A
Pelco UED22NA000A EVO Dual-Sensor 30x PTZ Thermal
Dual 1080p visible + thermal PTZ with 30x zoom for all-weather detection
- 30x optical zoom on visible channel paired with thermal imaging in single PTZ unit
- Operates in darkness, fog, and smoke; IP66/67/68 rated for -40°C to +60°C environments
- H.265/H.264 compression with PoE+ power; ONVIF Profile S, T, G, M compatible
$26,538.60 $18,956.99 Save $7,581.61 -
Speco Technologies
SKU: O5TMLB1
Speco O5TMLB1 5MP Dual Lens Thermal Camera
5MP dual lens thermal + visible camera for simultaneous threat detection
- Simultaneous 5MP visible and thermal imaging reduces camera count per zone.
- IP67-rated housing operates reliably from -22°F to 140°F in outdoor deployments.
- PoE 802.3af or DC 12V power support simplifies integration into existing infrastructure.
$3,177.80 $1,226.99 Save $1,950.81 -
Speco Technologies
SKU: O4FDMS1
Speco Technologies O4FDMS1 Dual Lens 4MP IP Camera
Dual 4MP lens in one housing, one PoE connection for tight spaces
- Two independent 4MP streams from one PoE (802.3af) drop cut conduit runs on retrofits.
- H.265/H.264/MJPEG compression with ONVIF support integrates into existing VMS platforms.
- Rated -22°F to 140°F with IR day/night on both sensors for year-round reliable coverage.
$1,335.50 $515.99 Save $819.51 -
Speco Technologies
SKU: O8FBMS1
Speco Technologies O8FBMS1 8MP Panoramic Multi-Sensor Bullet Camera
8MP panoramic bullet with multi-sensor, H.265, IR for wide-area outdoor surveillance
- 8MP multi-sensor panoramic frame eliminates stitching latency for wide-area coverage.
- H.265 compression halves storage and bandwidth versus H.264 at the same resolution.
- Outdoor-rated bullet form factor backed by a 3-year warranty for perimeter installs.
$3,332.30 $1,273.99 Save $2,058.31 -
Speco Technologies
SKU: O8LMSB2
Speco Technologies O8LMSB2 8MP 180 Multisensor IP Bullet Camera
180° 8MP multisensor bullet with white light for wide-area coverage
- 8MP 180° multisensor coverage consolidates wide-area zones into a single deployment point.
- H.265/H.264/MJPEG compression with onboard MicroSD (up to 256 GB) reduces NVR storage load.
- PoE 802.3af and integrated junction box simplify cabling in constrained retrofit environments.
$464.50 $448.99 Save $15.51 -
Speco Technologies
SKU: O8LMST1
Speco Technologies O8LMST1 8MP 180° Multisensor IP Camera
8MP 180° panoramic multisensor for single-camera wide-area coverage
- 8MP multisensor array delivers 180° panoramic coverage with no blind spots in one device.
- White light intensifier preserves color detail in near-darkness for forensic-grade review.
- PoE 802.3af power, H.265/H.264 compression, and junction box simplify single-run deployment.
$753.05 $411.99 Save $341.06 -
Speco Technologies
SKU: O8LMST2
Speco Technologies O8LMST2 8MP 180 Multisensor IP Camera with Whi
8MP 180° panoramic coverage with white light night vision
- 8MP resolution across a 180° FOV eliminates blind spots in wide-area scenes.
- White light intensifier delivers color detail at night without IR washout.
- PoE (802.3af) and multi-mount support simplify installation on walls, ceilings, or poles.
$1,072.50 $413.99 Save $658.51 -
Ubiquiti
SKU: UVC-G6-PTZ-B
Ubiquiti UVC-G6-PTZ-B 4K Dual-Lens All-Weather PTZ Camera
4K dual-lens PTZ with motorized zoom for wide & telephoto coverage
- Dual-lens 4K (8 MP) imaging captures wide and telephoto views in a single unit.
- PoE+ (802.3at) powered over a single RJ45 cable simplifies outdoor installation.
- Rated for -30 to 50°C operation with CE/FCC/IC certifications for global deployment.
In stock · Ships same business day$399.00 $398.99 Save $0.01
Multi-Sensor IP Cameras
Multi-sensor IP cameras combine multiple imagers in a single device to deliver wide-area coverage with fewer mounts, cable runs, and switch ports. These cameras are ideal for large open areas where reducing blind spots and simplifying installation are key deployment goals.
Plan Your Deployment
- Coverage design and blind-spot reduction objectives
- Mounting height and viewing angle alignment
- Bandwidth and bitrate planning for multi-imager streams
- Retention impact when multiple streams are recorded
- PoE budget requirements (often higher draw than single cameras)
Multi-Sensor IP Cameras — Engineering-Grade IP Surveillance for Commercial Deployments
This category covers 89 working models of multi-sensor ip cameras sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Resolution drives both image utility and bandwidth budget. 2MP and 4MP cameras cover most general-purpose surveillance at modest storage cost; 8MP and higher resolutions trade bandwidth for forensic detail useful when you need to identify faces or read plates at distance. Decide the minimum pixel density required at your scene's farthest target — most face-identification work needs 80 pixels per foot of subject — before locking in lens focal length and sensor count.
Low-light performance matters more than raw resolution in most real deployments. Sensor size, lens aperture, IR cut-filter behavior, and starlight-class technologies (Ambarella, Sony Starvis, Hanwha Wisenet X) determine whether your camera produces a usable image at 2 AM in a poorly-lit lot. Confirm minimum illumination figures at color and B/W modes — and read the test methodology, not just the headline lux number.
Compatibility with your video management software (VMS) is non-negotiable. ONVIF Profile S/T conformance is the baseline; verify the specific camera firmware against your VMS integration matrix before ordering. Edge analytics — object classification, line crossing, intrusion detection — often require manufacturer-native integration rather than ONVIF passthrough, which limits which cameras pair with which recorders.
Total cost of ownership extends well beyond unit price. Plan for installation labor (mast, conduit, PoE switch capacity), storage growth from higher-resolution streams, and warranty/service horizons. Cameras with 5-year warranties and free firmware updates almost always outlast cheaper alternatives that hit end-of-life within three years and force a refresh just as the surrounding system stabilizes.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 4MP, 8MP, 12MP, 2MP, 20MP+, 6MP, 5MP, 16MP |
| IP Rating | IP66, IP67 |
| Connectivity | Wired, Wi-Fi |
| Power | PoE, PoE+, PoE++, AC/DC, Theta proprietary |
| Channels | 4, 2, 20, 1, 3 |
| Storage | microSD |
Top Brands in This Category
Frequently Asked Questions
What resolution do I need for license plate capture?
For dependable license plate recognition at 25-30 mph, plan for 80-100 pixels per foot at the plate, which usually means a dedicated LPR camera with a long focal length and short shutter speed. General-purpose 4MP cameras can read plates only at close range and low vehicle speed. Combine an LPR-specific camera at chokepoints with overview cameras covering wider context for full coverage.
Do I need NDAA-compliant cameras?
If you sell to U.S. federal agencies, federally-funded projects, or many state and local government customers, yes — Section 889 of the NDAA bans Hikvision, Dahua, Huawei, and several other manufacturers from those installations. We carry NDAA-compliant lines from Axis, Hanwha, i-PRO, Pelco, Vivotek, and Bosch. Commercial private-sector buyers face no federal restriction but may inherit one through a customer's procurement rules.
What's the difference between PoE, PoE+, and PoE++?
PoE (802.3af) supplies up to 15.4W and powers most fixed-lens cameras. PoE+ (802.3at) goes to 30W and is the default for heated outdoor housings, PTZs, and motorized-zoom optics. PoE++ (802.3bt) reaches 60-90W and is required for large outdoor PTZs, multi-imager cameras with built-in IR, and accessories with integrated heaters and wipers. Always confirm the camera's PoE class against your switch budget per port.
How long do I need to retain video?
Storage retention is driven by regulation, insurance, or operational policy. Cannabis, banking, and gaming often require 30-90 days; most commercial buildings retain 14-30 days. Calculate storage as resolution × frame rate × compression × camera count × retention days. H.265 cuts the load roughly in half versus H.264 with comparable image quality. Build in 20% headroom for events that trigger higher-bitrate recording.
Can I mix camera brands on one recorder?
You can, but you give up edge analytics and convenience features tied to manufacturer-native integration. ONVIF Profile S/T provides basic streaming, PTZ control, and event subscription across brands, but advanced AI classification and per-stream metadata typically require same-brand camera and VMS. For deployments where you're standardizing, pick one VMS and align cameras to its supported list rather than mix arbitrarily.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.