DMP

DMP

SKU: 270

DMP 270 Network Transient Suppressor

TCP/IP network transient suppressor for cell communicators

• Suppresses TCP/IP ethernet transients to prevent panel resets in multi-building runs.
• Inline, passive installation requires no external power supply or active components.
• Certified UL 294, UL 864, UL 1610, ULC-S304, and additional UL/ULC listings.

DMP

SKU: 1351

DMP 1351 ProxPass

HID proximity credential card for door access control systems

• Passive HID proximity credential requires no battery—indefinite shelf life, zero field servicing.
• Standard 3.61"×2.6" form factor fits existing holders, reels, and lanyards without modification.
• Compatible with all HID proximity readers, enabling drop-in expansion across multi-door deployments.

DMP

SKU: 1301P

DMP 1301P USB Computer Proximity Reader

USB proximity reader for desktop/workstation access control integration

• USB interface connects directly to workstations, eliminating external access control panels.
• Reads standard proximity card credentials for logical and physical access authentication.
• Compact desktop form factor supports plug-and-play deployment on existing workstations.

DMP

SKU: 1301N

DMP 1301N USB Computer Proximity Reader

USB proximity reader for desktop access control integration

• USB HID interface eliminates separate power runs and secondary wiring at the workstation.
• Reads standard proximity cards for contactless credential capture at desktop terminals.
• Desktop mount form factor integrates into existing workstations with no dedicated hardware.

DMP

SKU: 1301M

DMP 1301M USB MIFARE Prox Reader

USB MIFARE proximity reader for Windows access control, no network required

• USB connection removes network infrastructure requirements, simplifying multi-door deployments.
• Reads MIFARE proximity cards and tags, compatible with widely supported access control platforms.
• Plug-and-play USB enumeration enables rapid installation without additional software configuration.

DMP

SKU: 1301I

DMP 1301I USB Computer iClass Reader

USB iClass reader for desktop access control integration

• USB interface connects directly to workstations with no additional hardware required.
• Reads HID iClass credentials, enabling desktop-level identity verification at any PC.
• Desktop mount form factor suits reception desks and security checkpoints for fast deploy.

DMP

SKU: 1154

DMP 1154 Wireless Four-Zone Input Module

Four wireless zones for door/window monitoring with HID and NFC support

• Four independent wireless zones accept legacy door/window contacts with no new conduit runs.
• Supports HID and NFC/13.56MHz credentials, reducing reader hardware across distributed sites.
• 12VDC operation allows CR123A battery or PS12-5 supply for flexible permanent or temp installs.

DMP

SKU: 1148-G

DMP 1148-G Personal Pendant Wireless Panic Button

Wireless pendant for panic and holdup alerts in commercial facilities

• Wearable panic button transmits wireless emergency alerts without reaching a hardwired device.
• Status LED confirms signal transmission to the receiver, enabling rapid deployment verification.
• Pre-installed non-removable battery eliminates ongoing maintenance; water-resistant for typical indoor use.

DMP

SKU: 1134

DMP 1134 Wireless Access Control Module

Wireless door control for multi-building campuses without hardwired circuits

• Wireless communication eliminates point-to-point wiring runs to each controlled door.
• Encrypted access transactions block interception and replay attacks on credentials.
• Standard strike outputs interface with existing electromagnetic and electromechanical hardware.

DMP

SKU: 1112

DMP 1112 Water and Temperature Detector

Wireless water and temperature detector for mechanical rooms and data centers

• Detects water contact within 60 seconds and flags temperature excursions beyond 45–95°F.
• Wireless DMP protocol eliminates conduit runs—retrofits into existing DMP receiver infrastructure.
• Battery-powered via two CR2450 cells; compact 1.25×1.25×1.0 in form factor at 0.03 lbs.

DMP

SKU: 1108

DMP 1108 Doorbell Module

Multi-door intercom module supporting up to 8 doors with wireless and wired

• Consolidates up to 8 door inputs into one wireless transmitter, cutting hardware count.
• 900 MHz FCC Part 15-certified radio eliminates dedicated annunciation cable runs.
• Accepts mechanical pushbutton and video doorbell inputs with no signal conditioning needed.

DMP

SKU: 1107

DMP 1107 Micro Window Transmitter

• Micro form factor fits narrow window frames where standard magnetic contacts cannot mount.
• 345 MHz wireless operation eliminates home-run wiring to perimeter windows and glass doors.
• Supervised DMP 1100 Series protocol alerts the XR panel on signal loss or tamper events.

DMP

SKU: V-4000-PLATE-1

DMP V-4000-PLATE-1 Camera Mounting Plate

• Dual-camera mounting plate secures two IP cameras to an outlet box
• Eliminates separate wall-anchor install for paired surveillance views
• Drops onto standard electrical box mounting cutouts and screw bosses

DMP

SKU: PSC-1

DMP PSC-1 Standard Light Proximity Card

Standard light proximity card for multi-door access control

• Reads up to 8 inches from compatible proximity readers for hands-free entry.
• Credit-card dimensions (2.2"×3.4"×0.6") fit wallets and strap clips without bulk.
• Passive credential requires no wiring or tools, simplifying multi-door deployments.

DMP

SKU: GP-23

DMP GP-23 Hidden Wire Surface Mount Magnetic Contact

Surface mount magnetic contact for DMP door and window monitoring

• Surface mount design eliminates frame drilling, simplifying retrofits and commercial installs.
• 1-inch rated gap tolerance gives installers reliable trigger thresholds on doors and windows.
• Concealed screws and multi-direction wire routing reduce visible footprint and deter tampering.

DMP

SKU: FG-730

DMP FG-730 Acoustic Glassbreak Detector

Acoustic glassbreak detector for windows and glass doors

• Detects breaking glass frequency signatures, reducing false alarms from vibration or wind.
• Integrates natively with DMP XT and XR Series panels via standard alarm signal protocol.
• Runs on standard panel voltage—no dedicated power supply required, simplifying installation.

DMP

SKU: 699-7800

DMP 699-7800 Keypad Deskstand Reader

PIN-based deskstand keypad reader for DMP access control systems

• Mounts DMP 7800 Series LCD keypads on any desk or counter without wall installation.
• Includes 4-foot RJ11 cord for direct connection to the DMP control panel comm jack.
• Rubber pads protect desk surfaces and reduce vibration during PIN-entry operation.

DMP

SKU: 699

DMP 699 Keypad Deskstand

Desktop deskstand for DMP keypad readers in access control

• Smoked plexiglass stand holds DMP LCD keypads at a stable angle on any flat surface.
• Included 4-foot RJ11 cord connects directly to keypad jack — no separate wiring required.
• Rubber pads and mounting screws prevent shifting during credential entry at busy stations.

DMP

SKU: 635F-R

DMP 635F-R Keypad Flush Mount Conduit Backbox

Flush mount conduit backbox for DMP keypad readers in TCP/IP systems

• Five factory-drilled 3/4" knockouts enable clean rear conduit entry with no field drilling.
• Flush mount profile (9.25"×6.375"×2.50") fits standard drywall without deep-cavity framing.
• Engineered exclusively for DMP 630F keypad readers in fire and remote-annunciator applications.

DMP

SKU: 635-R

DMP 635-R Keypad Surface Mount Conduit Backbox

Surface mount conduit backbox for DMP keypad readers

• 1.74" deep metal housing enables surface mounting on masonry or concrete block walls.
• Five 3/4" knockouts support separate conduit runs for signal and power, aiding code compliance.
• Designed for DMP 630F keypads in fire and remote-annunciator circuit installations.