Transition Networks 25032 vs Transition Networks 25135: Specification Comparison
Both products are 8-port, 10G unmanaged DIN rail switches from Transition Networks, targeting industrial and telecom edge deployments where plug-and-play simplicity and panel-mount form factor matter. The 25032 and 25135 share the same port count, speed tier, management philosophy, fiber type, mounting standard, and warranty class. This comparison examines where the two diverge across power and environmental specifications, physical dimensions, and the completeness of available spec data to help buyers determine which unit better fits their specific installation requirements.
In This Guide
- Do the 25032 and 25135 differ in port count, speed, or fiber connectivity?
- Which switch is better specified for harsh industrial environments and power constraints?
- How do the two switches differ in physical footprint and installation planning?
- Which should you choose: the 25032 or the 25135?
- Side-by-Side Specs
- FAQ
Do the 25032 and 25135 differ in port count, speed, or fiber connectivity?
Both switches offer identical port density and throughput on paper: 8 ports each running at 10G, with multi-mode fiber support on both units. Neither model is managed, meaning all ports operate as plug-and-play without VLAN, QoS, or CLI configuration. The specs provided do not detail individual port breakdowns (e.g., copper RJ-45 vs. SFP+ fiber counts) for either model, so buyers cannot confirm the exact copper-to-fiber ratio from the data available. Where both are identical on headline capacity, neither holds a measurable advantage in this dimension based on the provided specifications.
Which switch is better specified for harsh industrial environments and power constraints?
This is where the two models diverge most clearly. The 25032 carries an explicit operating temperature rating of Industrial (-40°C to +70°C) and a defined power input of 12VDC at 0.800A (sourced from 120VAC, 60Hz). These figures allow installers to size power supplies and validate deployment in outdoor cabinets, transportation infrastructure, or factory floors with temperature extremes.
The 25135, by contrast, provides no operating temperature range in the supplied specifications. Its power requirements are also absent from the provided data. Buyers evaluating the 25135 for harsh-environment deployments cannot confirm suitability from these specs alone and should consult the referenced datasheet (/content/product-datasheets/25135.pdf) before committing. The 25032 is the more transparently specified unit for environmental and power planning.
How do the two switches differ in physical footprint and installation planning?
Both units mount on a standard 35mm DIN rail, which is confirmed for each model. Beyond that, the two diverge in dimensional data. The 25135 carries a listed physical dimension of 18" × 16" × 10", which is an unusually large footprint for an 8-port switch and may reflect packaging or enclosure dimensions rather than the switch chassis itself—buyers should verify against the product datasheet. The 25032 has no physical dimensions listed in the provided specifications.
For panel and cabinet integration planning, neither set of specs is fully complete: the 25032 lacks dimensions, and the 25135's listed dimensions warrant field verification. Both carry a lifetime warranty, equalizing long-term support risk. No weight, IP rating, or shock/vibration data is provided for either model.
Which should you choose: the 25032 or the 25135?
Our take: The 25032 is the stronger choice when environmental and power specifications are required at the time of procurement. It is the only model of the two with a confirmed industrial operating temperature range (-40°C to +70°C) and a defined input power specification (12VDC, 0.800A / 120VAC, 60Hz), giving installers concrete data for control cabinet design, power supply sizing, and site qualification in harsh environments. The 25135 matches the 25032 on every other confirmed spec—8 ports, 10G, multi-mode fiber, unmanaged, DIN rail, lifetime warranty—but provides no operating temperature rating and no power draw figures in the supplied data, making it unverifiable for industrial deployments without consulting its datasheet. The 25135's listed physical dimensions (18" × 16" × 10") also require datasheet cross-check before use in enclosure planning. For buyers whose deployment environments are climate-controlled and whose power infrastructure is pre-defined, the 25135 may be adequate, but the 25032 offers more transparent specification coverage for rigorous site-qualification processes.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Transition Networks 25032 | Transition Networks 25135 |
|---|---|---|
| Product Type | Switch | Switch |
| Ports | 8 | 8 |
| Port Speed | 10G | 10G |
| Fiber Type | Multi-mode | Multi-mode |
| Managed | Unmanaged | Unmanaged |
| Mount Type | DIN Rail (35mm) | DIN Rail (35mm) |
| Operating Temperature | Industrial (-40°C to +70°C) | — |
| Input Voltage | 12VDC | — |
| Input Current | 0.800A | — |
| AC Source | 120VAC, 60Hz | — |
| Warranty | Lifetime | Lifetime |
| Dimensions | — | 18" x 16" x 10" (verify vs. datasheet) |
| Datasheet Available | Not specified in provided data | Yes (/content/product-datasheets/25135.pdf) |
| Configuration Required | None (plug-and-play) | None (plug-and-play) |
Frequently Asked Questions
Which should you choose: the 25032 or the 25135?
The 25032 is the stronger choice when environmental and power specifications are required at the time of procurement. It is the only model of the two with a confirmed industrial operating temperature range (-40°C to +70°C) and a defined input power specification (12VDC, 0.800A / 120VAC, 60Hz), giving installers concrete data for control cabinet design, power supply sizing, and site qualification in harsh environments. The 25135 matches the 25032 on every other confirmed spec—8 ports, 10G, multi-mode fiber, unmanaged, DIN rail, lifetime warranty—but provides no operating temperature rating and no power draw figures in the supplied data, making it unverifiable for industrial deployments without consulting its datasheet. The 25135's listed physical dimensions (18" × 16" × 10") also require datasheet cross-check before use in enclosure planning. For buyers whose deployment environments are climate-controlled and whose power infrastructure is pre-defined, the 25135 may be adequate, but the 25032 offers more transparent specification coverage for rigorous site-qualification processes.
Can either the 25032 or 25135 be used in outdoor or extreme-temperature cabinets?
Only the 25032 has a confirmed industrial operating temperature range (-40°C to +70°C) in the provided specifications, making it the verifiable choice for outdoor or temperature-extreme enclosures. The 25135 lists no operating temperature spec in the data available; its suitability for such environments cannot be confirmed without reviewing its datasheet.
Do both switches require the same power supply?
No. The 25032 specifies a 12VDC input at 0.800A (derived from 120VAC, 60Hz). The 25135 has no power input specification in the provided data, so buyers cannot determine its supply voltage or current draw without consulting the 25135 datasheet before ordering a power supply.
Are the 25032 and 25135 the same physical size for panel mounting?
The specs differ on this point. The 25135 lists dimensions of 18" × 16" × 10", which should be verified against the product datasheet as it may reflect packaging rather than switch chassis size. The 25032 has no dimensions listed in the provided specifications. Both mount on a standard 35mm DIN rail, but enclosure cutout and rail-space planning requires datasheet confirmation for both models.
More Network Switch Comparisons
- TP-Link SG2210XMP-M2 vs Ubiquiti USW-FLEX-2.5G-8
- TP-Link SG2210XMP-M2 vs Comnet CNGE8MS
- TP-Link SG2210XMP-M2 vs Lantronix S2220-1014-NA
- TP-Link SG2210XMP-M2 vs TP-Link S4500-8GP
- TP-Link SG2210XMP-M2 vs TP-Link SG2008P
- TP-Link S4500-8GP vs Ubiquiti USW-FLEX-2.5G-8
Network Switch Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.