Sato WWCT04241-WCN vs Sato WWCT04241-NDR: Specification Comparison
Both the WWCT04241-WCN and WWCT04241-NDR are Sato CT4-LX 305 dpi UHF RFID desktop thermal printers in the same physical chassis and device class. A buyer selecting between them would be comparing two SKU variants of the same platform — differing primarily in documented print-speed figures and minor spec-sheet presentation details. This comparison examines print performance, media and ribbon handling, connectivity, and RFID capability to surface any meaningful procurement distinction between the two part numbers.
In This Guide
- How do print speed and resolution compare between the WWCT04241-WCN and WWCT04241-NDR?
- Are media handling, ribbon capacity, and RFID capability equivalent across both SKUs?
- Do connectivity, display, memory, and operating environment differ between the two models?
- Which should you choose: the WWCT04241-WCN or the WWCT04241-NDR?
- Side-by-Side Specs
- FAQ
How do print speed and resolution compare between the WWCT04241-WCN and WWCT04241-NDR?
Both units share a structured-field print speed of 8 ips and a structured-field resolution of 305 dpi. However, the WWCT04241-WCN carries an additional tilde-field (marketing/supplemental) entry listing print speed as 6 ips — an internal discrepancy within that SKU's own spec data. The WWCT04241-NDR's supplemental field confirms 8 ips with no conflicting value. Both spec sheets also carry a secondary 'Print Resolution' structured field showing 203 dpi, which conflicts with the primary 305 dpi figure on both SKUs equally. Buyers should treat 305 dpi / 8 ips as the manufacturer-intended spec for both, but should note that the WWCT04241-WCN's supplemental sheet introduces the 6 ips discrepancy, which is absent from the WWCT04241-NDR.
Are media handling, ribbon capacity, and RFID capability equivalent across both SKUs?
Media handling specs are identical on both units: maximum media width 4.1 inches, minimum 1 inch, maximum roll outer diameter 5 inches, and maximum ribbon length 984 ft (300 m). Both support Direct Thermal and Thermal Transfer print methods. RFID capability is specified identically on both: UHF 860–960 MHz, EPC Class 1 Gen 2 (C1G2). Neither SKU's spec data discloses antenna count, read range, or encoding throughput in the structured fields; the WWCT04241-WCN supplemental section adds a card bullet citing 1,000–2,000 labels per hour on EPC C1G2 inlays, but this figure does not appear in the WWCT04241-NDR's data and cannot be verified as a differentiating spec from the provided documentation.
Do connectivity, display, memory, and operating environment differ between the two models?
Connectivity is identical on both: Ethernet, Wi-Fi, Bluetooth, and USB. The WWCT04241-WCN supplemental field additionally mentions NFC, which does not appear in any field of the WWCT04241-NDR spec data. Both units carry a 4.3-inch full-color touchscreen, 4 GB Flash memory, 1 GB DDR3 RAM, and 2 GB user storage. Power input is AC 100–240 V, 50/60 Hz on both. Operating temperature is 32°F to 104°F (0°C to 40°C) on both. Physical dimensions (7.0" x 9.375" x 8.4375"), weight (7.3 lb / 3.3 kg), mount type (desktop), and warranty (1-year) are identical. The WWCT04241-NDR spec data does not reference NFC; whether this reflects a hardware difference or a documentation omission cannot be determined from the provided specs alone.
Which should you choose: the WWCT04241-WCN or the WWCT04241-NDR?
Our take: The WWCT04241-NDR is the lower-ambiguity choice when spec-sheet consistency matters for procurement documentation. Both SKUs share identical structured-field specs — 305 dpi, 8 ips, UHF 860–960 MHz EPC C1G2, 4 GB Flash, 1 GB DDR3, 4.3" touchscreen, and the same media/ribbon limits — but the WWCT04241-WCN introduces two internal conflicts: a supplemental print-speed entry of 6 ips against the structured-field 8 ips, and a supplemental interface list that adds NFC, which appears nowhere in the WWCT04241-NDR data. If NFC is a required interface, the WWCT04241-WCN's supplemental data is the only source referencing it, and buyers should confirm with Sato before specifying. For deployments where NFC is not required and clean, conflict-free spec documentation is preferred, the WWCT04241-NDR presents a straightforward bill of materials. Both carry the same 1-year warranty and identical physical and environmental specs.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Sato WWCT04241-WCN | Sato WWCT04241-NDR |
|---|---|---|
| SKU | WWCT04241-WCN | WWCT04241-NDR |
| Print Resolution | 305 dpi | 305 dpi |
| Print Speed (structured field) | 8 ips | 8 ips |
| Print Speed (supplemental field) | 6 ips | 8 ips |
| Print Method | Direct Thermal / Thermal Transfer | Direct Thermal / Thermal Transfer |
| Max Print Width | 4.09" | 4.09" |
| RFID Frequency | 860–960 MHz UHF | 860–960 MHz UHF |
| RFID Standard | EPC C1G2 | EPC C1G2 |
| Connectivity | Ethernet, Wi-Fi, Bluetooth, USB | Ethernet, Wi-Fi, Bluetooth, USB |
| NFC | Listed in supplemental field | — |
| Display | 4.3" Full-Color Touchscreen | 4.3" Full-Color Touchscreen |
| Memory (Flash / DDR3) | 4 GB Flash + 1 GB DDR3 | 4 GB Flash + 1 GB DDR3 |
| User Storage | 2 GB | 2 GB |
| Max Media Roll OD | 5" | 5" |
| Max Ribbon Length | 984 ft | 984 ft |
| Weight | 7.3 lb (3.3 kg) | 7.3 lb (3.3 kg) |
| Dimensions (W x D x H) | 7.0" x 9.375" x 8.4375" | 7.0" x 9.375" x 8.4375" |
| Operating Temperature | 32°F–104°F (0°C–40°C) | 32°F–104°F (0°C–40°C) |
| Power Input | AC 100–240 V, 50/60 Hz | AC 100–240 V, 50/60 Hz |
| Warranty | 1-year | 1-year |
Frequently Asked Questions
Which should you choose: the WWCT04241-WCN or the WWCT04241-NDR?
The WWCT04241-NDR is the lower-ambiguity choice when spec-sheet consistency matters for procurement documentation. Both SKUs share identical structured-field specs — 305 dpi, 8 ips, UHF 860–960 MHz EPC C1G2, 4 GB Flash, 1 GB DDR3, 4.3" touchscreen, and the same media/ribbon limits — but the WWCT04241-WCN introduces two internal conflicts: a supplemental print-speed entry of 6 ips against the structured-field 8 ips, and a supplemental interface list that adds NFC, which appears nowhere in the WWCT04241-NDR data. If NFC is a required interface, the WWCT04241-WCN's supplemental data is the only source referencing it, and buyers should confirm with Sato before specifying. For deployments where NFC is not required and clean, conflict-free spec documentation is preferred, the WWCT04241-NDR presents a straightforward bill of materials. Both carry the same 1-year warranty and identical physical and environmental specs.
Is the WWCT04241-WCN or WWCT04241-NDR faster for high-volume RFID label runs?
Both SKUs list 8 ips in their primary structured-field spec. The WWCT04241-WCN's supplemental sheet introduces a conflicting 6 ips figure, but the WWCT04241-NDR's supplemental data consistently confirms 8 ips. Neither SKU provides a verified encoding throughput rate in the structured specs, so a side-by-side throughput comparison cannot be made from the provided data alone. Confirm the operative print speed with Sato before committing to either SKU for high-volume applications.
Does one model support NFC and the other not?
NFC appears only in the WWCT04241-WCN's supplemental interface list and is absent from all fields of the WWCT04241-NDR spec data. Whether this reflects a genuine hardware difference between the two SKUs or a documentation gap cannot be determined from the provided specifications. If NFC connectivity is required, verify directly with Sato which SKU includes it.
Are the two SKUs interchangeable for the same installation footprint?
On every structured spec — dimensions (7.0" x 9.375" x 8.4375"), weight (7.3 lb), power input (AC 100–240 V), operating temperature (32°F–104°F), media range, ribbon capacity, RFID frequency, memory, display, and connectivity — the two SKUs are identical. The differences that exist are limited to supplemental/marketing fields: a 6 ips vs. 8 ips print-speed discrepancy on the WCN and the presence of NFC only on the WCN's supplemental list. For installations where those two points are not decision factors, the units are physically and electrically interchangeable based on the provided data.
More Label Printer Comparisons
- Brother TD4550DNWB vs Sato WWCT04241-WCN
- Brother TD4550DNWB vs Sato WWCT04241-NDR
- Brother TD4550DNWB vs Sato WT212-404CW-EX1-2
- Brother TD4550DNWB vs Sato WWCT04441-WDR
- Brother TD4550DNWB vs Brother TD4420DNC
- Brother TD4550DNWB vs Brother TD4410D
Label Printer Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.