Which switch delivers higher per-port speed and PoE power headroom?

The NETWAY5P provides 5 ports at Gigabit (10/100/1000 Mbps) speeds, all carrying PoE+ (802.3at) with a stated total power budget of 120 W. Every port delivers simultaneous PoE+ and data, and the spec indicates full-duplex Gigabit switching fabric with no bottlenecking across all five ports.

The TL-SG105PP-M2 steps up to 2.5 Gbps per port across all 5 ports, with 4 of those ports supporting PoE++ (802.3bt — the highest standard, up to 90 W per port). Its PoE budget is stated as 65 W with a total power consumption of 123 W. The single uplink port (port 5) is non-PoE. For deployments requiring higher per-port bandwidth — multi-gigabit cameras, Wi-Fi 6/6E APs, or NVRs — the TP-Link's 2.5G lanes offer a 2.5× throughput advantage per port over the NETWAY5P's 1G ports.

On PoE standard, the TL-SG105PP-M2's 802.3bt (PoE++) exceeds the NETWAY5P's 802.3at (PoE+), enabling it to power higher-wattage devices. However, at a 65 W total PoE budget across 4 ports, real-world simultaneous power delivery per port is constrained. The NETWAY5P's 120 W budget across all 5 ports may support more simultaneous PoE+ devices in practice, depending on load distribution.

Which switch is better suited to managed enclosure installations versus unmanaged desktop use?

The NETWAY5P is specified as a Managed Layer 2 switch, meaning it supports VLANs, QoS, and other Layer 2 control features expected in professional security and access-control deployments. Its form factor supports DIN-rail and panel mounting, making it purpose-built for installation inside control enclosures — a common requirement for physical-security integrators who need the switch co-located with power supplies and controllers.

The TL-SG105PP-M2 is explicitly unmanaged, with operating modes limited to auto-negotiation and PoE Auto Recovery (a feature that power-cycles a PoE port if the connected device stops responding). It is a desktop form factor with wall and rack mount options, and its dimensions are provided as 294 × 180 × 44 mm. There is no VLAN, QoS, or Layer 2 management capability noted in the specs.

For installers deploying switches inside security panels or DIN-rail enclosures with centralized power, the NETWAY5P's form factor and managed feature set are directly relevant. For IT-side desktop or wall-mount deployments where plug-and-play simplicity is preferred and management is not required, the TL-SG105PP-M2's unmanaged design reduces configuration overhead.

How do warranty coverage, operating temperature range, and power input method compare?

The NETWAY5P carries a Lifetime warranty — a significant differentiator in physical-security installations where product longevity and support continuity matter. Its power input is described as a single centralized PoE source, meaning it is designed to receive power from an upstream PoE injector or power supply rather than from a standalone AC adapter. No operating temperature range is specified in the provided data.

The TL-SG105PP-M2 carries a standard (unspecified duration) warranty — no lifetime or extended warranty term is listed in the provided specs. Its power supply is a 100–240 VAC, 50/60 Hz DC power adapter, meaning it connects directly to AC mains without requiring an external PoE power source. Operating temperature is specified at 0–50 °C (32–122 °F), providing a defined thermal envelope for deployment planning.

The power architecture difference is operationally significant: the NETWAY5P requires an upstream PoE power source, which must be accounted for in system design. The TL-SG105PP-M2 is self-powered from AC, simplifying deployment where AC outlets are available. For enclosure builds where centralized DC/PoE power is already present, the NETWAY5P's approach is a natural fit; for standalone desktop or wall-mount drops, the TL-SG105PP-M2's AC adapter is more convenient.

Which should you choose: the NETWAY5P or the SG105PP-M2?

Our take: The NETWAY5P is the stronger choice when deploying inside physical-security enclosures requiring managed Layer 2 control, DIN-rail or panel mounting, and a lifetime warranty. Three concrete spec deltas define the tradeoff: first, the NETWAY5P is a Managed Layer 2 switch versus the TL-SG105PP-M2's unmanaged design — critical for VLAN segmentation and QoS in access-control systems; second, the NETWAY5P delivers 120 W PoE+ across all 5 ports versus the TL-SG105PP-M2's 65 W PoE++ budget across only 4 ports; third, the NETWAY5P carries a Lifetime warranty versus no specified warranty term for the TP-Link. Conversely, the TL-SG105PP-M2 is the stronger choice for IT-side or desktop deployments needing 2.5G per-port throughput for bandwidth-intensive endpoints (Wi-Fi 6 APs, multi-gig NVRs) and AC self-powered simplicity, at a defined 0–50 °C operating range. Platform qualifier: security integrators building managed, enclosure-based systems should favor the NETWAY5P; IT generalists prioritizing raw port speed and plug-and-play setup should consider the TL-SG105PP-M2.

Side-by-Side Comparison

Spec-for-spec, from manufacturer data.

Frequently Asked Questions

Related Resources

• Altronix NETWAY5P product page — full specs and to add to a quote
• TP-Link SG105PP-M2 product page — full specs and to add to a quote