Camden

Camden

SKU: CM-5070

Camden Push/Turn to Release N/C Maintained Red Only - CM-5070

• N/C maintained contact rated 6A @ 30VDC sustains release while coil remains energized.
• 2 3/8" red push/turn button provides mechanical egress independent of panel power or network.
• Bayonet interlocking design stacks contact blocks for auxiliary door sensor or alarm bypass.

Camden

SKU: CM-5050

Camden Push/Pull N/O \& N/C Maintained Red Only - CM-5050

• Dual N/O & N/C outputs let you wire fail-safe and fail-secure from one device.
• Maintained 30VDC action holds unlocked state without relay flicker or secondary logic.
• 6A switching capacity supports direct solenoid or relay coil control at the strike.

Camden

SKU: CM-5040

Camden Push/Pull N/C Maintained Red Only - CM-5040

• Fail-secure N/C logic stays locked on power loss, eliminating relay-chatter unlock risk.
• 30VDC operation integrates directly with standard access control power supplies.
• Push/pull mechanism supports either door swing direction without mechanical reversal.

Camden

SKU: CM-49C

Camden Adapter plate for mounting on double gang or 4\" - CM-49C

• Mounts Camden keypads to standard double-gang or 4" square electrical boxes.
• Passive mechanical component—no wiring, power, or configuration required.
• Eliminates custom fabrication, reducing install labor on standard box infrastructure.

Camden

SKU: CM-47SER

Camden Surface Round Extra Deep for Kinetic(tm) - CM-47SER

• Surface-mount round profile eliminates mortising, cutting retrofit labor on existing frames.
• Extra-deep 2-3/8" enclosure fits switch backplates and field wiring without cavity prep.
• ABS flame- and impact-resistant polymer handles commercial indoor environments reliably.

Camden

SKU: CM-47S

Camden Surface Round Standard Depth provision for - CM-47S

• Surface-mount ABS enclosure houses CM-40 series switches without in-wall rough-in.
• Flame- and impact-resistant black polymer construction suits high-traffic door frames.
• UL/CSA approval on compatible switch series supports compliant access control builds.

Camden

SKU: CM-450RL-7724-CPC

Camden Single gang Push/Pull N/O \& N/C - CM-450RL-7724-CPC

• Dual N/O and N/C contact blocks fire from one press, eliminating external relay stages.
• 6A @ 30V rating drives EM strikes and solenoid locks on 12–24V AC/DC without amplification.
• Free-spinning 18-gauge stainless button resists jamming and abuse in high-traffic corridors.

Camden

SKU: CM-450R

Camden Single gang Push/Pull N/O \& N/C Stainless - CM-450R

• Dual N/O and N/C contacts fire simultaneously, eliminating external relay logic.
• 18-gauge stainless steel construction meets NEMA 4X rating for washdown and salt-air.
• Free-spinning vandal-resistant button installs in any standard single-gang wall box.

Camden

SKU: CM-45/8B55SE1

Camden 4-1/2\" Push Plate Switch Icon \& Push to - CM-45/8B55SE1

• TCP/IP communication integrates directly into networked access control architectures.
• 30VDC operating power aligns with standard access control panel supply configurations.
• Flush-mount push-to-lock plate delivers tactile activation for electronic strike control.

Camden

SKU: CM-45/8B54SE1

Camden 4-1/2\" Push Plate Switch Icon \& Push to - CM-45/8B54SE1

• TCP/IP connectivity integrates directly into enterprise access control with no gateway hardware.
• 30VDC low-voltage operation simplifies wiring and meets safety requirements in tenant areas.
• Surface-mount form factor cuts retrofit costs on standard door frames and wall installations.

Camden

SKU: CM-45/455SE1

Camden 4-1/2\" Push Plate Switch Wheelchair \& - CM-45/455SE1

• TCP/IP communication eliminates analog relay runs, simplifying IP access control wiring.
• Operates at 30VDC, compatible with standard commercial access control power supplies.
• Wall and pole mount options support flexible deployment in corridors and entryways.

Camden

SKU: CM-45/454SE1

Camden 4-1/2\" Push Plate Switch Wheelchair \& - CM-45/454SE1

• TCP/IP connectivity enables remote monitoring and integration with existing access control platforms.
• 30VDC low-voltage operation is compatible with standard access control power supply infrastructure.
• Credential-independent push-plate activation supports ADA-compliant, hands-free entry at designated doors.

Camden

SKU: CM-45/4

Camden CM-45/4 Push Plate Switch 30VDC Wheelchair Accessible

4.5" push plate switch, 30VDC, ADA-compliant door control

• Large 4.5-inch plate reduces activation force for wheelchair users and limited dexterity
• 30VDC operation integrates with access strikes, door operators, and solenoid locks
• Two-wire connection works in retrofit and new-build installations without proprietary modules

Camden

SKU: CM-45/20

Camden DPDT switch for CM-40 41 45 60 series rated 15 - CM-45/20

• DPDT switch with 15A at 30VDC for CM-40/41/45/60 series controllers
• Two independent circuits per relay for strike plus REX dual control
• Drops into standard Camden access control hardware deployments

Camden

SKU: CM-43G

Camden CM-43G Gasket for CM-43CBL and CM-63CBL

• Restores IP66-equivalent seal on CM-43CBL and CM-63CBL enclosures against moisture ingress.
• Field-replaceable in 10–15 minutes using a standard Allen key; no special tooling required.
• Molded ABS construction resists UV and impact, extending reader service life 2–3 years.

Camden

SKU: CM-43CBL-ADP1

Camden Adaptor kit to mount SUREWAVE(tm) double - CM-43CBL-ADP1

• Bridges SUREWAVE double gang keypads to CM-4 series controllers without rewiring.
• Watertight-rated installation supports outdoor and wet-area access control deployments.
• Hardwired HID keypad integration eliminates wireless dependencies for secure credentialing.

Camden

SKU: CM-43CBL

Camden CM-43CBL Surface Reader Box

Water-tight surface reader box for HID keypad systems

• Water-tight enclosure protects credential readers from rain and moisture
• TCP/IP network connectivity for real-time credential validation
• Standard depth design fits HID keypads and proximity readers

Camden

SKU: CM-42-IG

Camden Additional In-ground mounting base with rebar - CM-42-IG

• Rebar-welded base locks post in concrete, eliminating movement in freeze-thaw cycles.
• Supports up to 5-door access control deployments with hard-wired or 915MHz wireless.
• Outdoor-rated ABS construction suits perimeter and high-traffic facility entry points.

Camden

SKU: CM-4085RPTE

Camden Spring Return DPST 1-60 sec Pneumatic Timer - CM-4085RPTE

• DPST configuration switches two independent circuits simultaneously from one activation.
• 1–60 sec adjustable pneumatic delay integrates directly into 24VDC access control rails.
• Spring-return mechanism fails safe to deactivated state on power or air interruption.

Camden

SKU: CM-4050

Camden Push/Pull N/O \& N/C Maintained Red Only - CM-4050

• Dual N/O & N/C maintained contacts eliminate external relay wiring for fail-safe or fail-secure logic.
• Rated 15A @ 30VDC continuous — verify panel strike driver sustains load without voltage sag.
• Accepts push-to-open and pull-to-open frame mounting in a compact 4.50" × 4.50" × 1.75" body.