Camden

Camden

SKU: CM-PT516M

Camden Concealed 5/16” inside diameter mortise mount - CM-PT516M

• 5/16" ID routes HID power and signal bundles together without compression or pinch risk.
• Concealed mortise routing eliminates surface conduit, preserving finished door frame aesthetics.
• 10-5/32" usable wire run covers most frame-to-panel distances without extension splices.

Camden

SKU: CM-PT375SS-36

Camden CM-PT375SS-36 Stainless Steel Endcaps 36 Inch

• 304 stainless steel resists corrosion in salt-air, high-humidity, and exterior sites.
• 36-inch length spans full door frames, minimizing mid-run splices and failure points.
• 3/8-inch ID supports 16-conductor 22 AWG or 8-conductor 18 AWG power transfer wire.

Camden

SKU: CM-PT375SS-24

Camden CM-PT375SS-24 Stainless Steel Endcaps 24"

• Stainless steel housing resists corrosion in salt-air and wet environments for 10+ years.
• Carries 16× 22 AWG or 8× 18 AWG conductors through a 3/8" ID protective sleeve.
• 24" length bridges standard 18–30" door-to-frame spans; 36" variant available for wider gaps.

Camden

SKU: CM-PT375SS-18

Camden Stainless steel endcaps 18\" length - CM-PT375SS-18

• 304/316-grade stainless steel resists corrosion in coastal and high-humidity installs.
• 18-inch rigid profile covers standard door-frame conduit runs without sag or gaps.
• Sized for 3/8-inch ID power transfer cable; verify cable diameter before ordering.

Camden

SKU: CM-PT375AL-DUR-18

Camden Duranodic (dark bronze) finish 18\" - CM-PT375AL-DUR-18

• 3/8" ID fits up to 16×22 AWG or 8×18 AWG conductors in a single conduit run.
• 18" length matches standard frame-to-striker spans, eliminating field cutting or excess slack.
• Anodized dark bronze aluminum resists corrosion and blends with commercial door hardware finishes.

Camden

SKU: CM-PT250SS-36

Camden CM-PT250SS-36 Stainless Steel Endcaps 36 Inch

• 300-series stainless steel resists corrosion in high-humidity and coastal environments.
• 1/4" bore fits 4-conductor 22 AWG and 2-conductor 18 AWG access control cables cleanly.
• 36-inch length covers panel-to-door runs and extended raceway segments in one piece.

Camden

SKU: CM-PT250SS-24

Camden CM-PT250SS-24 Stainless Steel Endcaps 24"

• 304-grade stainless endcaps resist corrosion in salt-air and high-humidity outdoor installs.
• 24" length spans standard door frames without splices, reducing signal-run failure points.
• 1/4" bore accepts 4x22 AWG or 2x18 AWG wire; terminates on-site with no special tools.

Camden

SKU: CM-PT250M

Camden Concealed 1/4” inside diameter mortise mount - CM-PT250M

• Routes 4-conductor 22 AWG or 2-conductor 18 AWG wire through door frame mortises.
• 7" length spans standard commercial frame depths for retrofit and new construction.
• Concealed routing eliminates visible cable runs on door faces for clean installs.

Camden

SKU: CM-PT250AL-DUR-18

Camden Duranodic (dark bronze) finish 18\" - CM-PT250AL-DUR-18

• 1/4-in bore fits 4-conductor 22 AWG or 2-conductor 18 AWG door control wiring.
• Anodized Duranodic dark bronze finish resists corrosion and salt spray on exterior doors.
• 18-in fixed length conceals wiring on surface-mount and recessed doorframe installations.

Camden

SKU: CM-LP1

Camden CM-LP1 Lithium Battery Pack (2) AA

• Two-cell lithium AA battery pack for Camden water-tight keypads
• Extended runtime for CM-60 series wet-environment access readers
• Drops into standard Camden keypad battery compartment

Camden

SKU: CM-CPC1-F

Camden Vandal and weather resistant clear lift cover - CM-CPC1-F

• Polycarbonate lift cover shields outdoor keypads from rain, dust, and impact.
• Outdoor-rated enclosure suits unsheltered perimeter and wall-mount flush installations.
• Hinged design allows quick field maintenance without full disassembly; 3-year warranty.

Camden

SKU: CM-CPC1

Camden Vandal and weather resistant clear lift cover

Clear lift cover for outdoor keypad readers with vandal protection

• Transparent design maintains keypad visibility while blocking weather and impact
• Wall-mounted TCP/IP keypad cover compatible with HID credential systems
• Outdoor-rated construction protects access points in high-traffic entry areas

Camden

SKU: CM-AF501SO

Camden CM-AF501SO Single Gang LED Annunciator with Adjustable

• Operates on 12/24V AC/DC (±10%), eliminating separate supply transformers on most installs.
• Mounts to any standard single gang box with 9/18" depth, simplifying retrofit into tight wall cavities.
• Compatible with electric strikes, electromagnetic locks, and electric door operators via relay output wiring.

Camden

SKU: CM-AF500

Camden CM-AF500 Single Gang LED Illuminated Annunciator

• Display remains dark when off, eliminating visual cues that enable tailgating.
• Field-selectable 12/30V AC/DC integrates directly into existing low-voltage circuits.
• Single-gang form factor mounts flush in standard boxes alongside readers and buttons.

Camden

SKU: CM-9800/7

Camden CM-9800/7 Exit Button Controller

• IP66-rated housing survives direct spray and dust without a separate weatherproof enclosure.
• Form C relay output at 24VDC/2A integrates directly with mag-locks, strikes, and access panels.
• Adjustable 0–60 s hold-open timer coordinates multi-strike lock sequences without extra modules.

Camden

SKU: CM-9190

Camden CM-9190 DPDT Maintained Strike

• DPDT maintained contact holds state until commanded, reducing false-release events.
• 30VDC operation lowers shock risk and reduces load on access control power supplies.
• TCP/IP connectivity enables remote actuation and audit logging without relay panels.

Camden

SKU: CM-9180PTE

Camden CM-9180PTE DPDT Momentary Strike

• DPDT momentary relay auto de-energizes after pulse, reducing thermal stress on locks.
• Rated 6A at 30VDC, supporting standard electric strike and EM lock loads directly.
• 1/4" aluminum faceplate and countersunk steel pushbutton resist tampering in high-traffic sites.

Camden

SKU: CM-9090

Camden CM-9090 DPDT Maintained Strike Lock

• Maintained DPDT operation holds the strike unlocked for the full access signal duration.
• Rated 6 A at 30VDC, matching standard access control power supplies with no voltage conversion.
• UL/CSA approved for North American life-safety, egress, and ingress control installations.

Camden

SKU: CM-9000/15N

Camden CM-9000/15N Steel Flush Maintained Strike

• Maintained 30VDC operation holds bolt continuously until power is removed.
• Flush-mounted 7/8" steel body reduces tamper exposure in high-traffic frames.
• Scales to 45 door positions per panel for campus or multi-tenant deployments.

Camden

SKU: CM-9000/10N

Camden CM-9000/10N Steel Flush Momentary Strike

• All-metal flush-mount construction resists vandalism in schools, hospitals, and secure perimeters.
• DPDT relay switches two circuits simultaneously—no extra relays needed for strike plus alarm shunt.
• Rated 6A @ 30VDC; compatible with EM strikes, electric deadbolts, and door operator control circuits.