Ubiquiti products
-
Ubiquiti
SKU: UAP-NANOHD-3-US
Ubiquiti UAP-NANOHD-3-US UniFi Access Point
802.11ac dual-band access point in compact ceiling/wall form
- 4x4 MU-MIMO dual-band 802.11ac Wave 2 handles 50+ concurrent clients without contention.
- 802.3at PoE+ powered—single Ethernet run delivers data and power, no AC outlet needed.
- Low-profile ceiling/wall mount form factor integrates without structural modification.
$532.99 -
Ubiquiti
SKU: UAP-FLEXHD-US
Ubiquiti UAP-FLEXHD-US UniFi Access Point
Compact ceiling-mount AP for tight spaces, UniFi-managed
- Compact Ø159 mm body mounts on wall, ceiling, pole, or tabletop without structural reinforcement.
- Single 10/100/1000 PoE (802.3af) port simplifies cabling—no separate power injector or outlet needed.
- Auto-adopts into UniFi Controller, pulling SSID and VLAN policy across multi-site deployments instantly.
$179.00 $150.99 Save $28.01 -
Ubiquiti
SKU: UAP-BEACONHD-US
Ubiquiti UAP-BEACONHD-US UniFi MeshPoint Access Point
Compact cylindrical mesh AP for tight spaces, PoE powered
- Cylindrical MeshPoint form factor fits wall cavities and ceiling voids where standard APs won't.
- 802.3af PoE eliminates separate power runs, simplifying cabling in constrained or retrofit spaces.
- UniFi Controller management centralizes config and policy enforcement across all deployed radios.
$143.99 -
Ubiquiti
SKU: UAP-AC-M-5-US
Ubiquiti UAP-AC-M-5-US UniFi Access Point
Dual-band 802.11AC access point for mid-scale deployments
- 1750 Mbps dual-band throughput supports 20–50 concurrent clients per AP.
- Single Gigabit PoE port per unit eliminates dedicated AC runs across all 5 APs.
- UniFi Controller manages all 5 APs centrally—firmware, roaming, and guest nets.
$495.99 -
Ubiquiti
SKU: UAP-AC-HD-US
Ubiquiti UAP-AC-HD-US High-Density Outdoor Access Point
802.11ac outdoor AP for high-density client zones, 2533 Mbps aggregate
- 802.11ac Wave 2 MU-MIMO delivers 2533 Mbps aggregate across dense outdoor client zones.
- Dual 10/100/1000 Ethernet ports support wired uplink redundancy and daisy-chain deployment.
- PoE+ (802.3at, 44–57 VDC) powers the unit via existing UniFi switches—no local AC needed.
$349.00 $341.99 Save $7.01 -
Ubiquiti
SKU: UAP-AC-HD-5-US
Ubiquiti UAP-AC-HD-5-US UniFi Access Point
802.11AC Wave 2 AP for high-density enterprise deployments
- 2533 Mbps aggregate dual-band throughput handles dense concurrent client loads.
- PoE+ powered at 90W per unit; plan PoE switch for 450W aggregate across 5 APs.
- Centralized UniFi controller synchronizes RF policy and roaming across all 5 units.
$1,679.00 $1,533.99 Save $145.01 -
Ubiquiti
SKU: UA-HUB-GATE
Ubiquiti UA-HUB-GATE adv Gate Hub for seamless gate access
Compact UniFi Access hub for distributed gate control with PoE++
- Single PoE++ (802.3bt) uplink powers the hub and delivers 55W across four PoE+ ports.
- Two dry-relay outputs (30V DC, 1A) drive electric strikes or mag-locks without external modules.
- Rated –30 to 60°C with DIN-rail mount; UL 294, FCC, CE, and NDAA certified for deployment.
$282.99 -
Ubiquiti
SKU: UA-HUB-DOOR-MINI
Ubiquiti UA-HUB-DOOR-MINI Compact Access Control Hub for 1 door
Single-door access control hub with PoE++ power and DIN rail mount
- PoE++ (802.3bt) at 19W eliminates separate power supplies for single-door deployments.
- DIN rail mount (113 × 66 × 27.6 mm) fits IDF closets and wall-mounted cable trays.
- UL 294, FCC, CE, and NDAA compliance satisfies enterprise and government procurement requirements.
$129.00 $128.99 Save $0.01 -
Ubiquiti
SKU: UA-HUB-DOOR
Ubiquiti UA-HUB-DOOR Single-Door Access Control Hub
Single-door access hub with PoE++ power for UniFi ecosystems
- PoE++ (802.3bt) powered—no separate supply needed, simplifying conduit runs.
- Five Gigabit ports support readers and downstream devices from a single hub.
- UL 294 and NDAA compliant for regulated facilities and federal-eligible deployments.
$204.99 -
Ubiquiti
SKU: UA-G3-SK-PRO
Ubiquiti UA-G3-SK-PRO cont. for 1 door with 2 readers, AppleTP
Single-door access control with dual readers, PoE powered
- Single 802.3bt PoE++ cable delivers power and data, eliminating low-voltage conduit runs.
- Dual-reader support enables badge+PIN or NFC multi-factor auth on one door controller.
- IP54-rated enclosure with ±15kV ESD protection suits electrically noisy install environments.
$599.00 $576.99 Save $22.01 -
Ubiquiti
SKU: UA-G3-SK-GATE
Ubiquiti UA-G3-SK-GATE Access kit with Hub, Intercom, PoE++
Complete gate access kit with hub, intercom, and PoE++ power
- IP65-rated polycarbonate hub survives outdoor gate installs without added weatherproofing.
- PoE++ (802.3bt) output powers the bundled G3 Intercom and one additional access device.
- DIN-rail mount and pre-matched hub/intercom bundle eliminate separate controller sourcing.
$819.99 -
Ubiquiti
SKU: UA-G3-INTERCOM
Ubiquiti UA-G3-INTERCOM Indoor/outdoor intercom for door entry
PoE intercom for UniFi door access, IP65 rated −30°C to 60°C
- IP65-rated aluminum enclosure handles outdoor exposure from −30°C to 60°C.
- Single Gigabit RJ45 with 802.3af PoE (13W) eliminates dedicated power runs.
- NFC (T1T–T5T), PIN, and mobile unlock reduce badge dependency across entries.
$491.99 -
Ubiquiti
SKU: UACC-UK-ULTRA-PANEL-ANTENNA
Ubiquiti UACC-UK-ULTRA-PANEL-ANTENNA External antenna f/Swiss
Outdoor dual-band panel antenna with 90° directional pattern for Swiss Army Knife Ultra
- 90° directional pattern focuses dual-band coverage where omni radiation is wasteful.
- IPX6-rated UV-stabilized enclosure supports permanent outdoor exposed deployment.
- Clip-on mount fits 1–2" pipe and all standard Swiss Army Knife Ultra mounting options.
$39.99 -
Ubiquiti
SKU: UACC-UK-ULTRA-OMNI-ANTENNA-AO
Ubiquiti UACC-UK-ULTRA-OMNI-ANTENNA-AO Swiss Army Knife Omni
360° dual-band omnidirectional antenna for Swiss Army Knife Ultra
- 360° omnidirectional pattern delivers dual-band coverage in all directions from one point.
- IPX6-rated weatherproof housing enables outdoor exposed deployment without additional enclosures.
- Lightweight at 42 g per pair and compact at 154 × 15 × 15 mm for unobtrusive mounting.
$15.00 $14.99 Save $0.01 -
Ubiquiti
SKU: UACC-UF-AC-100W
Ubiquiti UACC-UF-AC-100W 100W AC/DC power module
100W AC/DC power module for Ubiquiti Fiber OLT XGS systems
- Universal 90–264V AC input eliminates site-specific power conditioning across regions.
- Configurable 24–267V DC output supports Fiber OLT XGS deployments without added converters.
- CE, FCC, IC, and NDAA-compliant in a 167×65×35 mm metal enclosure rated to 45°C.
$69.00 $68.99 Save $0.01 -
Ubiquiti
SKU: UACC-U7-PRO-XG-WALL-COVER
Ubiquiti UACC-U7-PRO-XG-WALL-COVER Paintable cover for U7 Pro XG
Paintable wall cover for U7 Pro XG integration with custom finishes
- Paintable surface lets you color-match the AP faceplate to any interior wall finish.
- Compatible with U7 Pro XG Wall and U7 Pro Wall; not interchangeable with ceiling-mount models.
- Field-swappable with no AP reconfiguration needed, minimizing downtime during replacements.
$29.00 $28.99 Save $0.01 -
Ubiquiti
SKU: UACC-SSD-TRAY
Ubiquiti UACC-SSD-TRAY M.2 NVMe Storage Expansion
M.2 NVMe tray for CloudGateway and UNAS appliances, PCIe Gen3x2
- Supports M.2 NVMe sizes 2230–22110, sourcing standard 2280 drives from any supplier.
- PCIe Gen3x2 delivers ~2 GB/s throughput, sufficient for edge video recording workloads.
- Installs directly into compatible CloudGateway and UNAS slots—no external enclosure needed.
$19.00 $18.99 Save $0.01 -
Ubiquiti
SKU: UACC-RJ45-COUPLER-C6A-OUTDOOR
Ubiquiti UACC-RJ45-COUPLER-C6A-OUTDOOR Compact, weatherproof
Weatherproof RJ45 coupler for outdoor Cat6A cable extensions
- IPX6 weatherproofing seals the joint against high-pressure water in exposed runs.
- ANSI/TIA-568-D.2 compliance maintains full Cat6A signal integrity at the splice point.
- Compact ⌀20 × 93 mm polycarbonate body fits tight conduit and junction-box installs.
$19.00 $18.99 Save $0.01 -
Ubiquiti
SKU: UACC-RETROFIT-POE-2WIRE
Ubiquiti UACC-RETROFIT-POE-2WIRE PoE Over 2-Wire Retrofit Extender
Extend PoE power across existing 2-wire infrastructure for access control
- Accepts PoE++ input and delivers PoE/PoE+ output across existing 2-wire runs.
- Works with legacy twisted-pair or coaxial cable, eliminating new Ethernet pulls.
- Dual-unit TX/RX design deploys at the PoE source and near the access device.
In stock · Ships same business day$101.99 -
Ubiquiti
SKU: UACC-READER-PRO-JB-W
Ubiquiti UACC-READER-PRO-JB-W Junction box for Readers
Junction box for UniFi Reader Pro cable management and field connections
- Consolidates field wiring connections for UniFi Reader Pro and Doorbell installs.
- Supports flat surface mounting or 3/4-inch conduit attachment for flexible deployment.
- Protects exposed power and data terminals at the reader mounting point.
$30.00 $29.99 Save $0.01







