Back boxes
Showing Results for Back boxes
-
Add to Cart The item has been addedAxis
SKU: 02421-001
Axis 02421-001 IP66 Conduit Back Box
IP66/IP67 weatherproof conduit box for outdoor camera installations
- IP66/IP67 rated stops water jets, dust, and spray in harsh outdoor sites
- IK10+ impact resistance withstands vandalism and rough handling
- Mounts directly to 3/4" and 1" standard electrical conduit, no adapters
In stock · Ships same business day$169.00 $162.99 Save $6.01The item has been added -
Add to Cart The item has been addedAxis
SKU: 01190-001
Axis T94S01P Conduit Back Box - 01190-001
IP66/67 sealed conduit back box with IK10+ impact rating for outdoor cameras
- IP66/67 rating stops rain, dust, and spray from compromising cable terminations
- IK10+ vandal rating survives deliberate strikes and physical abuse without breaching
- 3/4" NPT and M25 conduit ports on front, back, and sides for flexible routing
In stock · Ships same business day$139.00 $133.99 Save $5.01The item has been added -
Add to Cart The item has been addedHanwha
SKU: TA-18
Hanwha TA-18 Flush Mount Back Box
Flush mount back box for TCIS-2/3 intercoms—conceals wiring behind wall
- Polycarbonate housing resists impact, UV exposure, and temperature cycling
- Recessed 5.67" diameter design hides terminals and eliminates wall clutter
- Tamper-resistant installation protects against vandalism and unauthorized access
In stock · Ships same business day$340.00 $258.99 Save $81.01The item has been added -
Add to Cart The item has been addedUbiquiti
SKU: UACC-G4 DOORBELL PRO POE-GANG BOX-WHITE
Ubiquiti UACC-G4 DOORBELL PRO POE-GANG BOX-WHITE Mounting Plate
Single-gang electrical box mount for G4 Doorbell Pro PoE camera
- Mounts directly to a standard single-gang electrical box, eliminating extra frames.
- Supports flat and angled positioning to optimize camera FOV at varied doorway depths.
- Accommodates PoE (802.3af) pass-through so one Ethernet run handles power and data.
$39.00 $38.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0803
Acti PMAX-0803 Rack Mount Gang Box Converter
Rack mount gang box converter for ACTi camera signal consolidation
- Fits standard 19-inch server racks for centralized infrastructure setup
- Consolidates multiple camera signal and power connections at rack level
- Compact 5.8 x 5.9 x 0.8 in form factor for control rooms and data centers
$14.00 $13.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0804
Acti PMAX-0804 Gang Box Converter
Two-gang box converter for Acti outdoor dome cameras with PoE
- Fits standard two-gang electrical boxes for flexible retrofit mounting
- PoE (802.3af) power eliminates separate electrical runs on site
- Compatible with Acti outdoor dome camera systems for new and retrofit builds
$61.00 $60.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0805
Acti PMAX-0805 Gang Box Converter
Gang box converter for ACTi cameras with PoE power integration
- PoE 802.3af powered—no separate power runs needed for camera sites
- Wall-mounted junction design simplifies wiring into existing infrastructure
- Compatible with ACTi A3x, A4x, E39, and E41x series IP cameras
$47.00 $46.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0806
Acti PMAX-0806 Gang Box Converter
4-inch gang box converter for Acti cameras with PoE power
- Fits standard electrical boxes; integrates B4x, E39, E44, E45, E46 series
- PoE 802.3af powered—no additional wiring or power infrastructure needed
- Simplifies retrofit and new-build camera installations into existing conduit
$33.00 $32.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0812
Acti PMAX-0812 Gang Box Converter
PoE gang box converter for ACTi A88/A92/A94/A96 cameras
- Powers up to four cameras via single PoE (802.3af) connection
- Fits standard 4-inch round and octagon electrical boxes
- Wall cavity or conduit mount for new and retrofit installations
$44.00 $43.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0813
Acti PMAX-0813 Gang Box Converter
Two-gang wall box converter for Acti A8x cameras, PoE powered
- Mounts in standard electrical boxes for retrofit and new-build installs
- PoE (802.3af) power eliminates need for additional wiring infrastructure
- Compatible with Acti A8x series cameras excluding A88 models
$39.00 $38.99 Save $0.01The item has been added -
ACTi
SKU: PMAX-0820
Acti PMAX-0820 Gang Box Converter
Gang box converter for ACTi cameras in flush-mount wall/ceiling setups
- Fits 4-inch round and octagonal electrical gang boxes for seamless integration
- PoE powered (802.3af) with no additional power infrastructure required
- Supports ACTi A71, A74, Z91, Z94, Z95 models in new and retrofit installations
$100.00 $99.99 Save $0.01The item has been added -
ACTi
SKU: PMAX080310PC
Acti PMAX080310PC 25 Gang Box Converter
25-channel rack converter with 6MP H.264 and 850nm IR
- 25 channels in standard 19-inch rack mount for distributed surveillance
- 6MP video capture with H.264 compression and 850nm infrared day/night
- ONVIF-compliant output compatible with centralized VMS platforms
$105.00 $104.99 Save $0.01The item has been added -
ACTi
SKU: SMAX-0244
ACTi SMAX-0244 Gang Box Converter PTZ Wall Mount
- Mounts outdoor PTZ cameras directly to standard wall gang boxes, eliminating extra brackets.
- Simplifies retrofit installs where gang box enclosures are already in place, cutting material costs.
- Rated for outdoor use; pair with an IP66-rated gang box to protect PoE and control connectors.
$147.00 $146.99 Save $0.01The item has been added -
ACTi
SKU: SMAX-0246
Acti SMAX-0246 Gang Box Converter with Heavy Duty Wall Mount
PoE gang box converter with wall mount for 2MP IP camera systems
- PoE (802.3af) powered—no separate power supply required at mount point
- Heavy-duty wall mount secures converter for indoor cable management and consolidation
- Compatible with Acti cameras and ONVIF-compliant network video management platforms
$147.00 $146.99 Save $0.01The item has been added -
Aiphone
SKU: GF-3B
Aiphone GF-3B 3-Module Flush Mount Back Box
3-module flush-mount back box for Aiphone GT Series intercom systems
- 3-module flush-mount back box for GT panels
- Accepts audio, video, or combo entrance modules
- Recessed install for clean architectural lines
$14.00 $13.99 Save $0.01The item has been added -
Aiphone
SKU: GT-4B
Aiphone GT-4B 4-Module Back Box
Flush-mount back box for up to 4 Aiphone GT Series modules
- 4-module back box for up to four entrance modules in one enclosure
- Flush-mount install for recessed wall integration on entrance points
- 0.9 lb back box for multi-module entrance panel deployment
$32.00 $31.99 Save $0.01The item has been added
Back boxes
Back boxes provide a secure mounting base and protected wiring space for surveillance cameras, intercoms, and access control devices. They help conceal terminations, support clean cable routing, and improve overall installation durability in commercial environments.
Plan Your Deployment
- Device compatibility and mounting pattern alignment
- Surface-mount vs recessed installation requirements
- Indoor vs outdoor environmental rating needs
- Cable entry, strain relief, and termination space planning
- Service access and future replacement considerations
Back boxes — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 29 working models of back boxes sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| IP Rating | IP66, IP67 |
| Power | PoE |
| Type | Accessory, Dome, Power Supply, Turret |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.