Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300PMS

Hanwha SBP-300PMS Stainless Steel Pole Mount

Stainless steel pole mount for 80mm+ pillars with outdoor durability
- Stainless steel construction resists corrosion in outdoor environments
- Adjustable positioning with steel straps for stable camera angle setup
- Fits cylindrical pillars 80mm diameter or larger for flexible placement
In stock · Usually Ships Same Business Day

$110.00 $82.99 Save $27.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300PMW2

Hanwha SBP-300PMW2 Pole Mount Base

White aluminum pole mount base for Hanwha cameras, 80mm+ poles
- Stainless steel straps resist corrosion; M10 screw fits standard housings
- M25 cable conduit routes power and network cables through mount base
- Lightweight aluminum (750g) with RAL9003 white powder coat for outdoor use
In stock · Usually Ships Same Business Day

$79.00 $60.99 Save $18.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300WM

Hanwha SBP-300WM PTZ Wall Mount Gooseneck

Flexible gooseneck wall mount for Hanwha PTZ cameras indoors and out
- 360-degree rotation and multi-axis tilt for precise camera positioning
- Direct compatibility with Hanwha PTZ camera line, no adapters needed
- Durable construction rated for indoor and outdoor temperature swings
In stock · Usually Ships Same Business Day

$79.00 $59.99 Save $19.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300WMS

Hanwha SBP-300WMS Stainless Steel Gooseneck Wall Mount

Stainless steel gooseneck wall mount for coastal and corrosive environments
- Flexible gooseneck design allows precise angle adjustment for optimal positioning
- Stainless steel construction resists corrosion in coastal, industrial, and chemical settings
- Compatible with Hanwha stainless steel camera models for integrated surveillance systems
In stock · Usually Ships Same Business Day

$625.00 $468.99 Save $156.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300WMS1

Hanwha SBP-300WMS1 Stainless Steel Wall Mount

Stainless steel wall mount for corrosion-resistant indoor/outdoor surveillance
- Precision-engineered stainless steel construction resists corrosion in harsh environments
- Compatible with Hanwha stainless steel camera models for integrated deployments
- Silver finish with stable positioning for industrial, coastal, and chemical facilities
In stock · Usually Ships Same Business Day

$625.00 $462.99 Save $162.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-300WMW

Hanwha SBP-300WMW Gooseneck Wall Mount

Gooseneck wall mount with articulated neck and 1.5" PF thread
- Aluminum and steel construction at 1.87 lbs for single-technician install
- Adjustable gooseneck allows camera angle tuning without wall remounting
- Compact 4.41" × 7.2" footprint fits tight corridors and retail spaces
In stock · Usually Ships Same Business Day

$79.00 $60.99 Save $18.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-301HM5

Hanwha SBP-301HM5 Ivory Hanging Mount

Compact ivory ceiling mount with 1.5" NPT for Hanwha cameras
- Aircraft-grade aluminum resists corrosion in humid and extreme temperatures
- Standard 1.5" NPT threads integrate with off-the-shelf commercial pipe fittings
- Lightweight at 197g with minimal footprint won't obstruct ceiling fixtures
In stock · Usually Ships Same Business Day

$49.00 $37.99 Save $11.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302CM

Hanwha SBP-302CM Telescopic Pendant Mount

Telescopic pendant mount with adjustable height for indoor/outdoor camera placement
- Extend or retract to dial in optimal camera angle without custom brackets
- Indoor and outdoor rated construction withstands temperature swings and moisture
- Pairs with Hanwha SBP-302CMA mounting plate for validated, secure camera hold
In stock · Usually Ships Same Business Day

$250.00 $187.99 Save $62.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302CM-12

Hanwha SBP-302CM-12 Extension Pipe for Hanging Mounts

12-inch extension pipe for Hanwha hanging mounts in tight spaces
- 12-inch aluminum and steel construction clears eaves and obstructions
- Compatible with all Hanwha hanging mounts for flexible camera positioning
- Indoor and outdoor rated for retail, parking, industrial installations
In stock · Usually Ships Same Business Day

$65.00 $48.99 Save $16.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302CMAS

Hanwha SBP-302CMAS Telescopic Pendant Mount with Swivel Adaptor

Telescopic pendant mount with swivel for flexible camera positioning
- Adjusts 4.5–8 feet high to fit standard ceiling heights without custom conduit
- ±45° swivel adaptor allows precise aiming in either direction after install
- Aluminum and steel hybrid resists corrosion in damp indoor and covered outdoor
In stock · Usually Ships Same Business Day

$400.00 $299.99 Save $100.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-302CMASW

Hanwha SBP-302CMASW White Telescopic Pendant Mount

White telescopic pendant mount with 4.5–8 ft extension and swivel
- Extends 4.5 to 8 feet with 45° pivot angle for flexible camera positioning
- 1.5-inch NPT thread compatible with Hanwha white hanging mount systems
- Corrosion-resistant white finish built for durable ceiling-mounted installations
Special Order · Usually Ships in 2-3 Weeks

$400.00 $296.99 Save $103.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302CMB

Hanwha SBP-302CMB Pendant Mount Back Box

Pendant mount back box for ceiling-suspended camera systems
- Stabilizes pendant-mounted cameras; prevents drift and vibration shift
- Indoor/outdoor rated construction handles retail, corporate, and warehouse
- Works with SBP-302CM(W) telescopic pendant mounts; standard tool install
In stock · Usually Ships Same Business Day

$190.00 $142.99 Save $47.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-303HF

Hanwha SBP-303HF Built-In SFP Install Base

Fiber SFP install base for Hanwha PTZ cameras with IP66/IK10 rating
- LC SFP port with 100/1000Base-T Ethernet for extended range connectivity
- Dual 3.5mm audio I/O for two-way communication on PTZ systems
- IP66/IK10 aluminum housing rated −50°C to +55°C operating range
Special Order · Usually Ships in 2-3 Weeks

$269.00 $199.99 Save $69.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-303PM

Hanwha SBP-303PM Pole Mount Adapter, White

Pole mount adapter for Hanwha thermal cameras, -50°C to 60°C
- Steel construction with stainless steel straps for secure attachment
- Compatible with TNO-4040T, TNO-4030T, TNO-4050T, TNO-4030TR, TNO-4040TR
- Operates in full humidity range 0–100% RH for outdoor deployment
Special Order · Usually Ships in 2-3 Weeks

$79.00 $60.99 Save $18.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-315C

Hanwha SBP-315C Mounting Hole Cover Plate (5-Pack)

White polycarbonate cover plates for PTZ mounts—5 pack, ø326 mm
In stock · Usually Ships Same Business Day

$30.00 $22.99 Save $7.01

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SBP-317HMB

Hanwha SBP-317HMB Large Cap Adapter Hanging Mount

Ceiling hanging mount for Hanwha multi-directional and panoramic cameras
Special Order · Usually Ships in 2-3 Weeks

$110.00 $96.99 Save $13.01

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

Hanwha SBP-300PMS Stainless Steel Pole Mount

Hanwha SBP-300PMW2 Pole Mount Base

Hanwha SBP-300WM PTZ Wall Mount Gooseneck

Hanwha SBP-300WMS Stainless Steel Gooseneck Wall Mount

Hanwha SBP-300WMS1 Stainless Steel Wall Mount

Hanwha SBP-300WMW Gooseneck Wall Mount

Hanwha SBP-301HM5 Ivory Hanging Mount

Hanwha SBP-302CM Telescopic Pendant Mount

Hanwha SBP-302CM-12 Extension Pipe for Hanging Mounts

Hanwha SBP-302CMAS Telescopic Pendant Mount with Swivel Adaptor

Hanwha SBP-302CMASW White Telescopic Pendant Mount

Hanwha SBP-302CMB Pendant Mount Back Box

Hanwha SBP-303HF Built-In SFP Install Base

Hanwha SBP-303PM Pole Mount Adapter, White

Hanwha SBP-315C Mounting Hole Cover Plate (5-Pack)

Hanwha SBP-317HMB Large Cap Adapter Hanging Mount

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading