Installation Hardware & Kits
Sub categories
Showing Results for Installation Hardware & Kits
-
Add to Cart The item has been addedCamden
SKU: CX-IRB
Camden Isolation Relay Module - CX-IRB
- DPDT architecture provides four contact states (N.O./N.C. per pole) from one module.
- Jumper-selectable 12/24 VDC input eliminates dual-SKU stocking across mixed voltage sites.
- 40 mA draw at both voltages safely sources from low-power access control buses.
$26.99The item has been added -
Code Blue
SKU: 40011
Code Blue 40011 S-1000 LED Combo Strobe for PAS WM-180
PoE LED strobe for PAS WM-180 systems in outdoor wet environments
- IP56-rated for outdoor and wet-environment deployment without separate power
- PoE 802.3af powered—no additional electrical infrastructure required
- Visual alarm indication integrated with PAS WM-180 alert system notifications
$590.00 $506.99 Save $83.01The item has been added -
Code Blue
SKU: 40115
Code Blue 40115 CB-5 Series LED Beacon Strobe
PoE LED beacon strobe with IP56 rating for security integration
- PoE (802.3af) powered—no separate power lines needed
- IP56 dust and water resistance for outdoor deployment
- Wall or pendant mounting compatible with surveillance systems
$690.00 $597.99 Save $92.01The item has been added -
Code Blue
SKU: 40159
Code Blue 40159 S-1000 LED Combo Strobe
PoE-powered LED strobe with visual alert for IP security systems
- IP56 rated for outdoor and harsh indoor environments
- Wall and ceiling mount compatible with standard PoE (802.3af) power
- 2MP resolution integrates with IP-based security platforms
$580.00 $502.99 Save $77.01The item has been added -
Code Blue
SKU: 40192
Code Blue 40192 S-2000 Strobe Kit with Bracket
IP56 strobe kit with PoE power for security and emergency alerts
- PoE (802.3af) powered—no separate power lines needed for installation
- IP56 rated for outdoor and indoor dust and water resistance
- Wall and ceiling bracket included for flexible mounting options
$520.00 $446.99 Save $73.01The item has been added -
Code Blue
SKU: 40196
Code Blue 40196 LED Faceplate Light Kit
IP68 LED faceplate light with PoE power and built-in mic
- PoE (802.3af) powered—no separate wiring needed for indoor/outdoor use
- IP68 rated for dust and water resistance in demanding environments
- Built-in microphone support for two-way audio on Code Blue systems
$210.00 $181.99 Save $28.01The item has been added -
Code Blue
SKU: 40354
Code Blue 40354 Microphone Assembly
PoE microphone assembly with IP68 rating for Code Blue cameras
- PoE (802.3af) powered—no separate power cabling required
- IP68 rated for outdoor use, dust, and submersion
- Two-way audio and recording with IA4100, IP5000, LS platforms
$120.00 $119.99 Save $0.01The item has been added -
Code Blue
SKU: 40525
Code Blue 40525 S-1000 LED Combo Strobe with Remote Mount
PoE LED combo strobe with 850nm IR and IP56 weather sealing
- 802.3af PoE power eliminates separate AC wiring in rack or remote mounts
- 850nm infrared + illumination combo for day/night surveillance operation
- IP56 rating handles dust and water exposure in outdoor/covered installations
$840.00 $698.99 Save $141.01The item has been added -
Code Blue
SKU: 40528
Code Blue 40528 S-1050 LED Combo Strobe with Photocell
PoE LED strobe with photocell for security alerts in wet/dusty sites
- IP56-rated construction handles wet and dusty environments reliably
- PoE (802.3af) power eliminates separate wiring for integrated deployment
- Built-in photocell automatically adjusts operation based on ambient light
$870.00 $753.99 Save $116.01The item has been added -
Code Blue
SKU: 40541
Code Blue 40541 LED Combo Strobe Gasket 6-Pack
Replacement gasket 6-pack for Code Blue LED combo strobe systems
- IP56-rated elastomer seals for dust and water spray protection indoors/outdoors
- 6 gaskets per pack supports bulk installations and ongoing maintenance stock
- Operating range -40°F to +158°F with UL 62368-1 and NEMA 4 construction
$61.00 $60.99 Save $0.01The item has been added -
Code Blue
SKU: 41105
Code Blue 41105 Heater AED
- Serial interface connects directly to compatible Code Blue AED units with no adapters required.
- Maintains AED battery and electronics above minimum thresholds in sub-freezing environments.
- Low continuous power draw supports 24/7 cold-storage deployment without straining facility circuits.
$250.00 $216.99 Save $33.01The item has been added -
Code Blue
SKU: 41539
Code Blue 41539 A-700 LED Area Light Assembly
PoE-powered LED area light with IP68 rating for outdoor surveillance
- PoE (802.3af) power eliminates dedicated electrical runs, simplifying deployment.
- IP68 rating ensures full dust and immersion protection for outdoor installations.
- Wall-mount form factor suits perimeter, parking, and facility access point lighting.
$870.00 $753.99 Save $116.01The item has been added -
Code Blue
SKU: 41548
Code Blue 41548 Faceplate Light LED
PoE-powered LED faceplate light with IP68 rating for indoor/outdoor
- IP68 weatherproof design operates reliably in wet, dusty, or harsh conditions
- 802.3af PoE integration eliminates separate power runs and conduit modifications
- LED faceplate mounts directly into standard camera housings for low-light support
$99.00 $98.99 Save $0.01The item has been added -
Code Blue
SKU: 41901
Code Blue 41901 Motion Sensing PIR Area Light
Motion-activated PIR area light with 5MP for outdoor perimeter security
- PoE (802.3af) powered—no additional wiring required for installation
- IP68 rated for reliable operation in dust and water-exposed environments
- 5MP resolution captures detailed footage for perimeter documentation
$1,970.00 $1,637.99 Save $332.01The item has been added -
Code Blue
SKU: 41902
Code Blue 41902 Motion Sensing PIR Area Light
PIR motion light with 2MP camera, PoE power, IP68 outdoor rating
- Passive infrared detection triggers LED illumination for perimeter and entry points
- PoE (802.3af) eliminates separate electrical wiring in outdoor installations
- IP68 sealed design withstands dust and submersion in harsh environments
$1,970.00 $1,801.99 Save $168.01The item has been added -
Code Blue
SKU: 41906
Code Blue 41906 Motion Sensing PIR Area Light
PoE motion-sensing area light for outdoor security with IP68 sealed design
- PIR motion sensor triggers illumination on detection for perimeter surveillance
- IP68-rated sealed construction operates reliably in wet and harsh outdoor conditions
- PoE 802.3af powered—mounts to walls or poles without separate electrical runs
$2,080.00 $1,901.99 Save $178.01The item has been added
Installation Hardware & Kits
Installation hardware and kits provide the job-ready components needed to mount, secure, and complete commercial surveillance, access control, and intercom deployments. Standardizing installation parts helps speed up installs and supports consistent long-term serviceability.
Plan Your Deployment
- Mounting surface type and hardware compatibility
- Indoor vs outdoor durability requirements
- Standardization across sites and install teams
- Serviceability and replacement part planning
- Project staging and kit-based installation efficiency
Installation Hardware & Kits — Engineering-Grade Installation Accessories for Commercial Deployments
This category covers 48 working models of installation hardware & kits sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Compatibility comes first. Mounting brackets, housings, and adapters are specific to the camera or device they support — the same manufacturer often makes parallel lines that don't share accessories. Verify the part number against the camera/device datasheet or compatibility list before ordering. Installation labor consumed troubleshooting a mismatched mount is the most common rework on commercial jobs.
Environmental rating determines material and finish. Indoor accessories typically use steel or aluminum with a powder-coat finish; outdoor accessories need stainless steel or specifically-rated coastal-grade finishes for salt-air resistance. UV exposure degrades plastic over years; choose UV-stabilized polymers or metal for sun-exposed installs. Plan for replacement at year 7-10 on outdoor plastic accessories.
Mounting load capacity must exceed device weight by a healthy margin. Camera weight, housing weight, and any wind loading on PTZs combine. Wall, ceiling, and pole mounts each have rated maximum loads — check before specifying. Pole-mount and pendant-mount installations need conduit, junction boxes, and weather-sealing that aren't always specified in the camera kit.
Wire management and accessibility for service get overlooked in early planning. Bottom-loaded cable entry in housings, swing-out mounting plates, and accessible junction boxes save hours when a camera needs service. Cheap mounts that require complete dismount to access cables drive labor cost up at every service call. Specify service-friendly mounting hardware on installs you expect to service for 10+ years.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 5MP, 20MP+, 2MP, 8MP |
| IP Rating | IP68, IP56 |
| Connectivity | Wired |
| Power | PoE |
| Type | Controller, Station Adaptors, LED Beacon/Strobe, Custom/Special Order Unit, Accessories, Lock/Strike, Relays and Control Units |
| Night Vision | Yes |
Top Brands in This Category
Frequently Asked Questions
Will this mount work with my camera?
Mounts are camera-specific in most cases. The product description and manufacturer's compatibility list are the authoritative source. If you're not certain, send the camera model and the mount part number to our Senior Specialists; we'll confirm compatibility before you order. Returning a mismatched mount after installation labor is significantly more expensive than checking up front.
Do I need a junction box?
For most outdoor and exposed-conduit camera installs, yes — junction boxes house cable terminations and protect splices from weather. The camera's mounting requirements often specify the junction-box size and material. Some camera-and-mount combinations integrate the junction box into the mount; others require a separate box. Confirm before ordering to avoid pulling cable into an installation that can't accept it.
What's the difference between a wall mount and a pendant mount?
Wall mounts attach to vertical surfaces and project the camera outward. Pendant mounts attach to ceilings or overhead structures and suspend the camera below. Pole mounts are a specialized wall mount for poles. Choose by the mounting surface available and the field-of-view orientation required; many cameras work in any mount with the right adapter.
Are stainless steel mounts worth the extra cost?
For outdoor coastal installs (within ~5 miles of saltwater), yes — galvanized steel rusts visibly within 2-3 years in coastal air. For inland outdoor, marine-grade is overkill; powder-coated galvanized lasts 10+ years. For corrosive industrial environments (chemical plants, wastewater), stainless steel or specifically-rated coatings extend service life dramatically. Match the material to the environment, not the budget pressure.
Can I use one brand's mount with another brand's camera?
Sometimes — many mounts accept standard mounting patterns (¼-20 thread, M6 pattern, VESA spacing) and cross brands. Manufacturer-specific cast housings rarely do. Check the mount's hole pattern and weight rating against the camera's specs. When in doubt, use the camera manufacturer's recommended mount; cross-brand savings on mounts are typically small and the warranty implications of mismatched hardware aren't worth the risk.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.