Comelit · UT9178

Comelit UT9178 Surface-Mounted Wall Housing for 8 Ultra

Surface-mount wall housing for Comelit 8 Ultra intercoms with PoE+

• Surface-mount wall housing for 8 Ultra entrance panel modules
• 221 x 380 x 35 mm form factor for direct flat-wall installation
• PoE+ (802.3at) compatible with 2560x1440 outdoor entrance panels

Comelit · UT9179

Comelit UT9179 Surface-Mounted Wall Housing

Surface-mounted 4MP housing for Comelit 9 Ultra intercom systems

• Holds nine 9 Ultra modules in a 3×3 grid within a 332×289×35 mm wall footprint.
• Die-cast aluminum frame with cataphoresis treatment resists corrosion in coastal or industrial environments.
• Tool-free friction-fit module retention and included interconnect cable reduce field assembly time.

Comelit · UT9184H

Comelit UT9184H Rain Shield for Flush Housing 2x2 Ultra

Weather shield for Comelit 2x2 Ultra flush housing, PoE+ powered

• Grey-anodised aluminium construction resists corrosion for long-term exterior use.
• Fits 2x2 Ultra flush housing (4 modules); no additional wiring or power required.
• At 259×232×32 mm, verify wall clearance before mounting to avoid conduit conflicts.

Comelit · UT9191

Comelit UT9191 Rainshield Surface-Mounted Wall Housing

Weatherproof 4MP wall housing with PoE+ for outdoor Comelit systems

• Anodised aluminium shell resists corrosion in coastal and industrial outdoor environments.
• Compact 116×112×57 mm envelope fits a single Comelit Ultra surface-wall entrance module.
• Power and signal pass through unchanged, preserving PoE delivery to the mounted module.

Comelit · UT9192

Comelit UT9192 Rainshield Surface-Mounted Wall Housing

Surface-mounted 4MP rainshield housing for outdoor intercom entry points

• PoE+ (802.3at) lets one Ethernet cable carry video and power
• Surface-mount rain shield for 2560x1440 outdoor entrance panels
• Removes separate 12VDC or 24VAC runs at outdoor mount points

Comelit · UT9193

Comelit UT9193 Surface-Mounted Rainshield Wall Housing

Surface-mount rainshield housing for 4MP IP cameras with PoE+ power

• PoE+ (802.3at) eliminates 12VDC runs to outdoor mount locations
• Surface-mount rain shield for 2560x1440 outdoor entrance panels
• Single Cat5e/6 cable carries both video and power on retrofits

Comelit · UT9194

Comelit UT9194 Rainshield Surface-Mounted Wall Housing

Weather-sealed 4MP housing for outdoor wall-mount camera deployments

• Anodised aluminium rain shield for outdoor entrance panel install
• PoE+ (802.3at) compatible mount for 2560x1440 Ultra video panels
• Surface-mount wall housing weatherproofs exterior intercom drops

Comelit · UT9196

Comelit UT9196 Rainshield Surface-Mounted Wall Housing

Surface-mounted rainshield housing for outdoor 4MP PoE+ cameras

• Houses 6 Ultra modules in 2 stacks of 3 side-by-side modules
• PoE+ (802.3at) compatible with 2560x1440 outdoor entrance panels
• Wall-mount rain shield for direct exterior surface installation

Comelit · UT9198

Comelit UT9198 Rainshield Surface-Mounted Wall Housing

Weatherproof surface-mounted housing for 4MP PoE+ cameras

• Anodised aluminium rain shield for surface-mount network gear
• PoE+ (802.3at) compatible with 2560x1440 outdoor entrance panels
• Wall-mount housing for exposed exterior or indoor lobby placement

Comelit · UT9199

Comelit UT9199 Rainshield Surface-Mounted Wall Housing

Weather-resistant 4MP wall housing with PoE+ for outdoor IP cameras

• Rain shield protects a 9-module Ultra entrance panel outdoors
• Anodised aluminium grey housing for direct exterior surface mount
• PoE+ (802.3at) compatible 2560x1440 panel weather protection

Comelit · UT9305M

Comelit UT9305M Empty Glass Module Housing

4MP empty glass module with PoE+ for third-party camera integration

• PoE+ (802.3at) up to 30W per port over a single PoE+ switch port
• Empty glass module housing for Ultra entrance panel customization
• Single Cat5e/6 cable carries data and power, no AC conduit needed

DSC · HSM2208

DSC HSM2208 DIN Rail Mount Housing

DIN rail or panel mount housing for DSC security controllers

• DIN rail mount housing for DSC 12VDC modules
• Compatible with backup battery and UPS infrastructure
• Direct-fit cabinet mount for security installations

Epson · C32C814592

Epson C32C814592 T88IV Power Supply Housing Box

Dark gray power supply housing for Epson T88IV thermal receipt printers

• T88IV power supply housing in dark gray metal box
• Protects internal power distribution components
• Direct-fit replacement for TM-T88IV printer

Epson · C32C814611

Epson C32C814611 U220 Power Supply Housing Box

Replacement power supply housing for Epson U220 receipt printers

• U220 power supply housing in cool white finish
• Contains and shields PSU for thermal dissipation
• Direct-fit replacement for receipt printer system

FLIR · T912379

FLIR T912379 Protective Housings for Automation Cameras

• Protective housing for FLIR automation thermal cameras
• Environmental shield for industrial and outdoor deployment
• NDAA compliant for federal facility procurement

Geovision · 150-MT901-VD0

Geovision 150-MT901-VD0 GV-MOUNT901 Dome Housing Pendant Mount

• Pendant mount suspends GV-VD series dome housings for clean ceiling drops in corridors and lobbies.
• Interior cable pathway routes PoE cabling through the mount, keeping infrastructure concealed.
• Fixed pendant orientation sets camera angle at install; adjust before final tightening to lock aim.

Geovision · 51-MT91700-EFD1

Geovision 51-MT91700-EFD1 GV-MOUNT 917 Dome Housing

• Engineered specifically for EFD2101 and EFD3101 dome cameras ensuring secure fit.
• Supports ceiling and wall mounting to standardize camera positioning across deployments.
• Protective enclosure shields optics from dust and weathering in indoor or outdoor installs.

Geovision · 54-VD12U-K02

Geovision 54-VD12U-K02 VD123 Housing Smoke Cover

• IK07-rated cover withstands impacts up to 5J on drop-ceiling and wall-bracket installs.
• Direct-fit snap-in replacement for VD123 series domes; no adapters or modifications needed.
• Smoke tint reduces lens glint without measurable light transmission loss or image degradation.

Geovision · 84-HOUG101-0001

Geovision 84-HOUG101-0001 Housing Box IP67

• IP67 rating seals against dust and 1m submersion, blocking moisture-induced corrosion.
• Houses PoE injectors, surge protectors, and terminal blocks in one weatherproof compartment.
• Consolidated outdoor cable termination reduces field-side RJ45 and power connection failures.

Geovision · 84-HOUG102-0001

Geovision 84-HOUG102-0001 Camera Housing

• IP66 and IK10 ratings handle washdown, salt spray, and vandalism without failure.
• Supports varifocal IP PTZ cameras up to 8MP for high-detail outdoor coverage.
• Single PoE (802.3af) run powers the camera—no separate power cable required.

Geovision · 84-HOUG103-002U

Geovision 84-HOUG103-002U Box Housing with IR

• Integrated IR illuminators extend PTZ coverage in low-light and nighttime conditions.
• PoE connectivity simplifies cabling by delivering power and data over a single run.
• Box enclosure shields Geovision IP PTZ cameras from rain, dust, and UV exposure outdoors.

Hanwha · AM03-021680G

Hanwha AM03-021680G Assembly Cover Top

OEM assembly cover top housing for Hanwha QNV-6012R cameras

• Assembly cover top for the Hanwha QNV-6012R dome
• OEM replacement maintains camera equipment integrity
• Direct-fit spare for vandal-resistant indoor cameras

Hanwha · AM07-002530M

Hanwha AM07-002530M Case Top Assembly

OEM case top assembly for SNV-6084R enclosure replacement

• Direct-fit replacement for SNV-6084R surveillance housing
• Ivory finish maintains aesthetic consistency with Hanwha enclosures
• Genuine OEM part for field technicians and system integrators

Hanwha · AM07-004492X

Hanwha AM07-004492X Case Top Assembly

OEM case top assembly for QNV-8081R housing replacement

• Genuine Hanwha component designed for QNV-8081R camera enclosure
• White case top assembly maintains proper environmental sealing
• Direct replacement part for maintenance and system reconfiguration

Hanwha · AM07-006494A

Hanwha AM07-006494A Front Assembly Housing

Genuine OEM front housing for Hanwha Vision security systems

• Authentic Hanwha replacement component manufactured to OEM tolerances
• Compatible across Hanwha Vision surveillance system architectures
• White housing assembly for professional integrator installations

Hanwha · AM07-010880C

Hanwha AM07-010880C Assembly Case Top

OEM assembly case top for Hanwha LND6070R indoor cameras

• OEM case top assembly for the Hanwha LND6070R camera
• Direct factory-spec component for indoor housings
• Maintains structural integrity for 4K dome cameras

Hanwha · AM07-011835A

Hanwha AM07-011835A Case Body Assembly

OEM case body assembly for XNO-6120R surveillance cameras

• IP67-rated white housing withstands harsh outdoor conditions year-round
• IK10 impact protection resists vandalism and physical damage
• Direct replacement part engineered to original Hanwha specifications

Hanwha · AM07-011945A

Hanwha AM07-011945A Top Cover Assembly

OEM top cover assembly for PNM9030V Wisenet cameras

• Weatherproof housing seals moisture and dust from camera internals
• Genuine Hanwha replacement part engineered for PNM9030V compatibility
• White housing maintains environmental protection in outdoor deployments

Hanwha · AM07-012538G

Hanwha AM07-012538G Case Top Assembly

OEM case top assembly for XNV-6081R-HW-HC environmental protection

• Genuine Hanwha replacement designed for XNV-6081R-HW-HC network cameras
• White case top assembly with environmental sealing and structural support
• OEM construction maintains proper fit and housing integrity in deployments

Hanwha · AM07-012950F

Hanwha AM07-012950F Dome Cover Top Assembly

OEM dome cover top assembly for Hanwha QND-6011 series cameras

• White engineered polymer top cover—direct fit replacement, no modifications
• Genuine OEM component for QND-6011 dome camera housing maintenance and repair
• Lightweight 1 lb assembly for routine maintenance or complete camera rebuilds

Hanwha · AM07-012970B

Hanwha AM07-012970B Case Assembly for QNO-7082R

OEM case assembly for QNO-7082R replacement and repair

• OEM case assembly for the Hanwha QNO-7082R bullet
• Maintains warranty coverage on field repairs
• Drop-in component for replacement and rebuild work

Hanwha · AM07-013323B

Hanwha AM07-013323B Case Top Assembly

OEM case top assembly for Hanwha PNM-9084QZ network camera

• Genuine replacement housing with exact fit for PNM-9084QZ platform
• White weatherproof enclosure maintains camera protection and durability
• Lightweight 1 lb component for straightforward maintenance and installation

Hanwha · EP02-004412A

Hanwha EP02-004412A QNE-7080RV Camera Cable Assembly

Dedicated cable assembly for QNE-7080RV with PoE and 12VDC support

• 640mm cable assembly for the Hanwha QNE-7080RV camera
• Aluminum housing for corrosion-resistant outdoor mount
• Supports PoE and 12VDC power-input configurations

Hanwha · EP02-004589A

Hanwha EP02-004589A Microphone Cable Assembly

7-pin microphone cable assembly for QNV-6072R and QNV-6082R cameras

• 7-pin microphone cable for QNV-6072R and QNV-6082R
• Aluminum housing provides EMI shielding for clean audio
• External mic connection for outdoor camera audio

Hanwha · SBL-100D

Hanwha SBL-100D Dome Ceiling Housing

Dome ceiling housing for Hanwha IP cameras with discrete white plastic design

• Ceiling mount positions camera overhead for broad room coverage and reduced tampering risk
• Dome form factor conceals camera body and lens to blend into ceiling infrastructure
• Compatible with XNB-6001, PNM-9000QB cameras and SLA-T2480/T4680 lens modules

Hanwha · SBP-300NM

Hanwha SBP-300NM Housing & Mount for TNB-6030

Compact housing & mount for TNB-6030 wall or ceiling installation

• Aluminum construction with ivory finish blends into retail, banking, and public spaces
• Wall and ceiling mounting options with included hardware for flexible camera positioning
• Purpose-built for TNB-6030 compatibility with discreet, minimal visual footprint