IP Camera Accessories | Mounts, Enclosures, Lenses, IR & Power

Deployment Considerations

Environmental protection and weather resistance
Mounting stability and load support
Power and voltage compatibility
Cable management and termination quality
Compliance with local safety standards

Sub categories

Showing Results for Accessories

Compare

Add to Cart The item has been added
System Sensor

SKU: R-20E

System Sensor R-20E Single DPDT Relay with EOL

Single DPDT relay with EOL supervision and TCP/IP remote control
- 24 VDC operation with end-of-line supervision for networked integration
- TCP/IP communication enables remote relay actuation and status monitoring
- Operating range –40°F to 158°F suits indoor and outdoor deployments
In stock · Ships same business day

$85.37 $51.99 Save $33.38

Add to Cart
The item has been added
Compare

Out of stock
System Sensor

SKU: R-20T

System Sensor R-20T Single DPDT Relay with Tamper

Single DPDT relay with integrated tamper detection and TCP/IP networking
- 35VDC operation with dual-pole, dual-throw switching for fire alarm integration
- TCP/IP communication enables remote monitoring and control across compatible systems
- Integrated tamper detection alerts to unauthorized access or physical tampering
Special Order · Ships in 2-3 weeks

$52.95 $34.99 Save $17.96

Add to Cart
The item has been added
Compare

Out of stock
System Sensor

SKU: R-24E

System Sensor R-24E 4-Gang DPDT Relay with EOL

4-Gang DPDT relay module with TCP/IP and EOL supervision for fire alarm control
- Four independent DPDT relays at 35VDC for multi-output switching in networked systems
- TCP/IP communication integrates with System Sensor fire alarm control panels
- End-of-Line supervision detects circuit faults across all relay outputs
Special Order · Ships in 2-3 weeks

$222.75 $143.99 Save $78.76

Add to Cart
The item has been added
Compare

Out of stock
System Sensor

SKU: R-24T

System Sensor R-24T 4-Gang DPDT Relay with Tamper

4-gang DPDT relay module with tamper protection for door and access control
- Independent switching on each gang for 24 VDC or 120 VAC loads
- TCP/IP communication integrates with fire alarm and security control systems
- Tamper protection safeguards against unauthorized circuit interference
Special Order · Ships in 2-3 weeks

$161.44 $104.99 Save $56.45

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
System Sensor

SKU: RA100Z

System Sensor RA100Z Remote Annunciator for Duct Detectors

TCP/IP remote annunciator for System Sensor duct detection systems
- TCP/IP Ethernet connectivity eliminates dedicated alarm wiring to remote locations
- 29VDC operation integrates with existing fire alarm panel power supplies
- Compact 14.38" × 5" × 2.5" form factor fits control room racks and wall mounts
In stock · Ships same business day

$41.57 $27.99 Save $13.58

Add to Cart
The item has been added
Compare

Out of stock
System Sensor

SKU: RFP

System Sensor RFP Retrofit Plate for SpectrAlert Advance Red

TCP/IP retrofit plate for SpectrAlert Advance Red legacy upgrades
- Network-ready 35VDC operation integrates existing red strobes into supervised IP systems
- Retrofit plate mounts to SpectrAlert Advance Red devices for modernized fire alarm networks
- TCP/IP communication protocol supports facility management system integration and monitoring
Special Order · Ships in 2-3 weeks

$131.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
System Sensor

SKU: RRS-MOD

System Sensor RRS-MOD i3 Series Reversing Relay Synchronization Module

TCP/IP reversing relay module for i3 Series networked fire alarm systems
- 35VDC operation integrates directly with standard fire alarm power distribution
- Bidirectional relay switching enables conditional signal routing across multiple nodes
- TCP/IP communication eliminates hardwired relay circuits in distributed installations
In stock · Ships same business day

$79.40 $55.99 Save $23.41

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
System Sensor

SKU: RTS151

System Sensor RTS151 Remote Test Station

Remote fire alarm test station with TCP/IP for networked facilities
- 29VDC powered with TCP/IP connectivity for remote diagnostics without site visits
- Compact 14.38" × 5" × 2.5" footprint fits control cabinets and wall panels
- Integrates directly into existing fire alarm system architectures for code compliance
In stock · Ships same business day

$91.65 $61.99 Save $29.66

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
System Sensor

SKU: RTS151KEY

System Sensor RTS151KEY Remote Test Station with Key

TCP/IP remote test station with keyed access for networked fire alarms
- Test fire detection systems remotely over TCP/IP from any authorized workstation
- 29VDC operating voltage integrates directly into standard fire alarm control loops
- Keyed design restricts access to authorized personnel, preventing accidental triggers
In stock · Ships same business day

$135.36 $88.99 Save $46.37

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
System Sensor

SKU: RTS2

System Sensor RTS2 Duct Detector Remote Test Station

Remote test station for System Sensor duct detectors, 29VDC operation
- Test duct smoke detectors from control panel location without accessing ductwork
- Multi-signaling protocol support integrates with current and future fire alarm panels
- Compact 14.38" × 5" × 2.5" form factor mounts in tight mechanical spaces
In stock · Ships same business day

$197.17 $126.99 Save $70.18

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
System Sensor

SKU: RTS2-AOS

System Sensor RTS2-AOS Remote Test Station for Duct Detectors

Remote test station for duct detectors via TCP/IP network
- Test detectors from central console—no ladder climbs or site visits
- 29VDC power from fire alarm panel; integrates into existing networks
- Compact 14.38" × 5" × 2.5" enclosure fits standard electrical cabinets
In stock · Ships same business day

$294.99 $188.99 Save $106.00

Add to Cart
The item has been added
Compare

Out of stock
System Sensor

SKU: SCRHK

System Sensor SCRHK Ceiling-Mount High Candela Strobe Red with Marking

Ceiling-mount red strobe for fire alarm with high candela output
- Selectable candela settings up to 185 cd for large open areas
- 12VDC operation integrates with standard fire alarm panels
- 4" x 4" compact ceiling mount for unobtrusive installation
Special Order · Ships in 2-3 weeks

$118.99

Add to Cart
The item has been added
Compare

Out of stock
System Sensor

SKU: SCWHK

System Sensor SCWHK Ceiling-Mount High Candela Strobe White with Ma...

Ceiling strobe for fire alarm systems with high candela output and TCP/IP
- 12VDC operation integrates with networked fire alarm architectures via TCP/IP
- High candela strobe output for visual notification in commercial installations
- IP56-rated ceiling mount operates reliably from –40°F to 151°F
Special Order · Ships in 2-3 weeks

$147.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
System Sensor

SKU: SENS-RDR

System Sensor SENS-RDR i3 Series Infrared Sensitivity Reader

Contactless infrared reader for i3 Series access control over TCP/IP
- Infrared credential detection eliminates mechanical wear and contact corrosion
- Native TCP/IP networking integrates directly into standard infrastructure at 35VDC
- i3 Series compatible for coordinated multi-door deployments across large facilities
In stock · Ships same business day

$624.23 $399.99 Save $224.24

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
System Sensor

SKU: SMB600

System Sensor SMB600 Surface Mount Kit for 100/400 Series

Surface mount kit for System Sensor 100/400 detectors, no recessing
- 35VDC operation with TCP/IP networking for direct Ethernet integration
- Mounts flat to ceiling or wall surfaces, eliminating cavity rough-in work
- Compatible with full System Sensor 100/400 series detector line
In stock · Ships same business day

$23.14 $14.99 Save $8.15

Add to Cart
The item has been added
Compare

Out of stock
System Sensor

SKU: SPCWK

System Sensor SPCWK Wall-Mount Speaker White

TCP/IP wall speaker for fire alarm & security systems
- 12VDC operation integrates with System Sensor panels and IP networks
- IP56-rated compact design (4" × 4" × 1") mounts on walls or ceilings
- Operates reliably from –40°F to 151°F across commercial installations
Special Order · Ships in 2-3 weeks

$145.99

Add to Cart
The item has been added

What to Look For When Buying

The six decisions that matter most before you spec.

Match Bracket to Camera + Surface

A dome camera mounted on a textured wall needs a wall-mount adapter with a gasket; mounted on a pole it needs a pole-mount arm; mounted on an eave it may need a pendant. Third-party brackets exist but brand-specific brackets include proper camera cable routing and weather gasketing. Buying a $40 generic bracket to save on a $80 Axis bracket usually costs more in installation time.

Enclosure NEMA Rating

NEMA 3R = light rain; NEMA 4 = splash + driving rain; NEMA 4X = above + corrosion resistance (coastal, industrial); NEMA 6 = temporary submersion. For weather-exposed camera enclosures, NEMA 4X is the commercial standard. For mission-critical outdoor gear, pair NEMA 4X enclosure + IP67 camera + IK10 vandal rating.

C/CS-Mount Lens Selection

Box cameras use interchangeable C-mount (17.526mm flange) or CS-mount (12.5mm flange). Lens focal length + sensor size determines field of view: a 4mm lens on a 1/3" sensor gives ~60° horizontal FOV. Our DORI guide covers lens selection by scene distance. F-stop matters for low-light; P-iris for auto-exposure.

IR Illuminator Wavelength

850nm IR is more efficient but produces a faint visible red glow (deterrent or accidental giveaway, depending on use case). 940nm is truly covert but requires ~2x the power for the same effective range, and many cameras have lower sensitivity at 940nm. Match illuminator wavelength to camera IR-cut filter spec, or image washout results.

Power Supply Sizing & Distance

12VDC cameras at 100ft from a power supply drop significant voltage over 18-gauge wire — a camera rated for 12V may see 10.5V at the camera end under load, triggering brownout resets. For long runs, use a higher-voltage power supply (24VAC or 48VDC) and step down at the camera. UL-listed surveillance power supplies (Altronix) publish voltage-drop tables.

Cable Jacket Rating

Indoor Cat6 is rated CM (communications); plenum-rated CMP is required for above-drop-ceiling runs per NFPA 70. Outdoor/direct-burial Ethernet is a different product (CMX, direct-burial gel-filled). Mixing jacket ratings causes code violations and fire inspector rejections. Always spec by run environment, not lowest-cost SKU.

Technology Stack

The specs and acronyms that actually affect outdoor performance.

NEMA vs IP Rating Systems

NEMA is the US enclosure standard (NEMA 1-13); IP is the international standard (IP00-IP68). Rough crosswalk: NEMA 4 ≈ IP66, NEMA 4X ≈ IP66 + corrosion, NEMA 6 ≈ IP67. Some spec sheets list both; when only one is given, the crosswalk is approximate. For coastal, industrial, and food-processing environments, specify NEMA 4X or IP66 + stainless steel.

C-Mount vs CS-Mount Lenses

C-mount: 17.526mm flange focal distance. CS-mount: 12.5mm flange. CS cameras accept both lens types (C lenses need a 5mm adapter ring); C cameras accept only C lenses. Most modern box cameras are CS-mount for lens flexibility. Lens thread is 1-inch × 32 TPI on both.

F-Stop / Iris

F-stop = focal length ÷ aperture diameter. Lower F-stop (wider aperture) means more light, better low-light performance, shallower depth of field. F1.4 is very low-light capable; F1.8 is common commercial spec. P-iris (precise iris) lenses auto-adjust aperture based on scene lighting — reduces over-exposure during day, improves low-light at night.

850nm vs 940nm IR

IR illuminators at 850nm are more energy-efficient and the sensitivity of most camera IR-cut filters peaks here — but 850nm produces a faint visible red glow from the LEDs. 940nm is invisible to human eye but requires ~2x the power or shorter effective range. Many covert-deployment cameras are re-tuned for 940nm sensitivity.

UL-Listed Power Supplies

Underwriters Laboratories listed power supplies meet safety standards for overcurrent, overvoltage, and enclosure isolation. UL 294 specifies additional requirements for access control; UL 603 for security burglary; UL 1310 for Class 2 power. Insurance and code requirements increasingly specify UL-listed supplies — particularly in commercial and institutional installations.

Plenum vs Riser vs PVC Cable

Plenum-rated (CMP) cable uses low-smoke FEP jacket for use above suspended ceilings where smoke spreads through return-air plenums. Riser (CMR) is for vertical shaft runs between floors. PVC (CM) is for open office runs only. Using CM in plenum spaces violates NFPA 70 — costly inspector rejection if caught.

Typical Deployment Scenarios

New Construction Retrofit

Cat6A plenum cable pulled to camera locations with proper service loops, 2-gang electrical boxes at each dome location with weatherproof backbox, Cat6A patch panel at the IDF, UL-listed power supplies for any 12V/24V camera, labeled and tested before cameras are mounted.

Coastal / Corrosive Environment

NEMA 4X stainless-steel enclosures for outdoor cameras, 316-grade stainless brackets, silicone dielectric grease on every connector, hot-dipped galvanized or powder-coated steel poles. Budget 15-25% more on accessories vs. standard outdoor — and plan for 3-5 year inspection cycles rather than 10.

Box-Camera LPR Application

Box camera with 50-150mm telephoto lens, dedicated 850nm IR illuminator at same height as camera, pole-mount bracket with junction box, UL power supply for camera + illuminator. LPR-specific enclosures with anti-reflective glass to avoid nighttime IR bloom. Typical deployment: dedicated lane camera, not general-purpose surveillance.

Parking Garage Retrofit

Existing analog coax cable replaced via NVT Phybridge or similar PoE-over-coax, vandal-resistant dome enclosures at ground level, low-profile bullet cameras on ceiling, LED-plus-IR-compatible illuminators to handle harsh fluorescent lighting. Enclosures rated for vehicle-exhaust environment.

Frequently Asked Questions

Do I need the OEM bracket for my camera, or will a generic bracket work?

For most commercial installations, specify the OEM bracket. Brand-specific brackets include proper cable routing, gasketed weather seals, and mounting-hole patterns matched to the camera — which matters more than the cost savings of a generic bracket. Generic brackets are acceptable for indoor standard-dome cameras on flat surfaces; for outdoor, vandal-rated, or pendant applications, use OEM.

What NEMA rating do I need for outdoor camera enclosures?

NEMA 4 for most weather-exposed deployments (driving rain, snow). NEMA 4X for coastal, industrial, or food-processing environments (adds corrosion resistance — typically stainless steel or fiberglass construction). NEMA 6 for temporary submersion or flood-prone areas. The IP-rating equivalent is IP66 for NEMA 4, IP66 + corrosion for NEMA 4X, IP67 for NEMA 6.

How do I choose the right lens focal length for a box camera?

Work backward from the scene. Identify the farthest point you need identification-grade coverage, use our DORI guide to calculate required pixels-per-foot at that distance, and match lens focal length + sensor size to deliver that PPF. A 4mm lens on a 1/3" sensor covers ~60° horizontal FOV; a 12mm lens on the same sensor covers ~20°. Wide FOV = shorter identification distance.

What's the difference between 850nm and 940nm IR illuminators?

850nm is more energy-efficient — you get more effective range per watt — but produces a faint visible red glow from the LEDs. 940nm is truly invisible to the human eye but requires about 2x the power for equivalent range, and many cameras have lower sensor sensitivity at 940nm. For deterrent visibility or cost-efficient long-range, 850nm; for covert applications, 940nm.

Can I power an IP camera with a generic 12V wall-wart?

Not for a commercial deployment. Generic wall-warts are unregulated, not UL-listed for security applications, and typically don't include surge protection. Use a UL-listed surveillance power supply (Altronix AL series, UL 294 or UL 603) with battery backup where required. PoE is preferred when possible — single cable, centralized power management, UPS-backed.

What cable jacket rating do I need for in-ceiling runs?

Plenum-rated (CMP) cable is required for any run through a return-air plenum space above suspended ceilings (most commercial buildings). Riser (CMR) for vertical shafts between floors. PVC (CM) for open office spaces only. Using non-plenum cable in a plenum space is a fire-code violation under NFPA 70 and will be rejected by inspectors. Budget plenum cable for any building where you're not 100% sure of the return-air path.

Accessories

Deployment Considerations

Sub categories

Showing Results for Accessories

System Sensor R-20E Single DPDT Relay with EOL

System Sensor R-20T Single DPDT Relay with Tamper

System Sensor R-24E 4-Gang DPDT Relay with EOL

System Sensor R-24T 4-Gang DPDT Relay with Tamper

System Sensor RA100Z Remote Annunciator for Duct Detectors

System Sensor RFP Retrofit Plate for SpectrAlert Advance Red

System Sensor RRS-MOD i3 Series Reversing Relay Synchronization Module

System Sensor RTS151 Remote Test Station

System Sensor RTS151KEY Remote Test Station with Key

System Sensor RTS2 Duct Detector Remote Test Station

System Sensor RTS2-AOS Remote Test Station for Duct Detectors

System Sensor SCRHK Ceiling-Mount High Candela Strobe Red with Marking

System Sensor SCWHK Ceiling-Mount High Candela Strobe White with Ma...

System Sensor SENS-RDR i3 Series Infrared Sensitivity Reader

System Sensor SMB600 Surface Mount Kit for 100/400 Series

System Sensor SPCWK Wall-Mount Speaker White

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Outdoor Deployments

Frequently Asked Questions

Related Categories

Engineering Reading