Access Control
Sub categories
Showing Results for Access Control
-
Camden
SKU: CX-DESPK
Camden Remote Speaker Station with key for both audio - CX-DESPK
- Controls up to 4 independent door circuits with 24VDC magnetic lock activation.
- Native proximity reader support eliminates decoder modules, reducing wiring overhead.
- Wall and rack mount options allow flexible placement at doors or equipment cabinets.
$120.00 $72.99 Save $47.01 -
Camden
SKU: CM-120G
Camden Rubber gasket for any stainless steel single - CM-120G
- Rubber gasket seals single-gang SS faceplate against rain and dust ingress.
- Replaces degraded seals in 10–15 minutes; no adhesive mixing or cure time required.
- Compatible with CM-120 Series 24VDC Wiegand keypads supporting up to 999 users.
$8.00 $4.99 Save $3.01 -
Camden
SKU: CM-AF142SOFE
Camden Single Gang LED Dome Light w/ adjustable - CM-AF142SOFE
In stock · Ships same business day$188.99 -
Camden
SKU: CM-AF141SO
Camden Single Gang LED Dome Light w/ Sounder. - CM-AF141SO
- Mounts to any standard single-gang box; runs on 12–24V AC/DC without relays.
- Integrated piezo sounder delivers 93 dB at 1 m with user-adjustable volume output.
- Wedge lens provides corridor-visible LED indication from both ends of a hallway.
In stock · Ships same business day$170.00 $102.99 Save $67.01 -
Camden
SKU: CM-AF142SO
Camden Single Gang Multi-Color LED Dome Light w/ - CM-AF142SO
- Combines 93 dB piezo sounder and multi-color LED into one single-gang unit.
- Accepts 12V or 24V AC/DC, integrating with virtually any access control panel.
- Color selection (red/green/blue) set at wiring time — no controller software needed.
$180.00 $108.99 Save $71.01 -
Camden
SKU: CM-420RPTE
Camden Single gang N/O and N/C contacts Red button - CM-420RPTE
- Dual N/O and N/C contacts enable strike activation and alarm supervision in one device.
- Accepts 12V or 24V DC, compatible with standard access control power supplies and solenoids.
- Single-gang ABS housing retrofits directly into existing electrical boxes with no adapters.
In stock · Ships same business day$124.00 $76.99 Save $47.01 -
Camden
SKU: CM-1000/21
Camden Single gang neoprene gasket for Camden push - CM-1000/21
- Neoprene construction seals against moisture and dust in outdoor deployments.
- Direct single-gang drop-in replacement requires no hardware modification.
- Rated for 30VDC Camden push button assemblies, maintaining existing infrastructure.
$9.00 $5.99 Save $3.01 -
Camden
SKU: CM-450RL-7724-CPC
Camden Single gang Push/Pull N/O \& N/C - CM-450RL-7724-CPC
- Dual N/O and N/C contact blocks fire from one press, eliminating external relay stages.
- 6A @ 30V rating drives EM strikes and solenoid locks on 12–24V AC/DC without amplification.
- Free-spinning 18-gauge stainless button resists jamming and abuse in high-traffic corridors.
$191.00 $116.99 Save $74.01 -
Camden
SKU: CM-450R
Camden Single gang Push/Pull N/O \& N/C Stainless - CM-450R
- Dual N/O and N/C contacts fire simultaneously, eliminating external relay logic.
- 18-gauge stainless steel construction meets NEMA 4X rating for washdown and salt-air.
- Free-spinning vandal-resistant button installs in any standard single-gang wall box.
$133.00 $81.99 Save $51.01 -
Camden
SKU: CV-110SPK
Camden Slim-line stand alone prox. reader \& keypad - CV-110SPK
- Dual-protocol output (OSDP + Wiegand) integrates with modern and legacy panels.
- Reads HID 37-bit and AWID 34-bit prox formats; supports up to 2,000 users.
- Standalone design consolidates reader and keypad into one device for single-door installs.
$290.99 -
Camden
SKU: CM-1000/45
Camden SPDT maintained contact switch 6 A @ 125 V 3 - CM-1000/45
- SPDT maintained contacts hold state without coil power, eliminating idle heating.
- Dual rating (6A/125VAC, 3A/30VDC) covers both legacy DC strikes and 120VAC loads.
- TCP/IP interface enables remote status monitoring without dedicated hardwired relay racks.
$51.00 $31.99 Save $19.01 -
Camden
SKU: CM-1000/40
Camden SPDT momentary contact switch, 6 A @ 125 VAC, 3 A @ 30 VDC
SPDT momentary switch for door strikes and locks, TCP/IP networked
- 6 A @ 125 VAC / 3 A @ 30 VDC rated for solenoid strikes and relays
- TCP/IP enabled integration with networked access control systems
- SPDT momentary contact operation for electronic lock and strike control
$47.00 $28.99 Save $18.01 -
Camden
SKU: CM-5085GPTE
Camden Spring Return DPST 1-60 sec Pneumatic Time - CM-5085GPTE
- Field-adjustable 1–60 sec pneumatic delay eliminates separate electrical timers.
- DPST contacts at 24VDC/6A drive magnetic strikes or solenoids without added relays.
- Mechanical spring return resets on power loss, preventing stuck contacts at egress doors.
In stock · Ships same business day$383.00 $236.99 Save $146.01 -
Camden
SKU: CM-5085RPTE
Camden Spring Return DPST 1-60 sec Pneumatic Time - CM-5085RPTE
- DPST contacts deliver simultaneous NO and NC switching from a single actuator at 24VDC/6A.
- Mechanical pneumatic timer adjusts 1–60 sec with no panel power required for timing cycles.
- Rated 1,000,000 activation cycles with auto spring-return—no manual reset in high-traffic egress.
In stock · Ships same business day$383.00 $213.99 Save $169.01 -
Camden
SKU: CM-4085RPTE
Camden Spring Return DPST 1-60 sec Pneumatic Timer - CM-4085RPTE
- DPST configuration switches two independent circuits simultaneously from one activation.
- 1–60 sec adjustable pneumatic delay integrates directly into 24VDC access control rails.
- Spring-return mechanism fails safe to deactivated state on power or air interruption.
$383.00 $230.99 Save $152.01 -
Camden
SKU: CM-7085
Camden Spring Return, DPST 1-60 SEC Pneumatic Time Delay, (Requires...
Adjustable pneumatic time delay 1-60 sec, DPST switch for access control
- 1–60 second adjustable delay with spring return pneumatic actuation at 24VDC
- DPST configuration integrates with HID credential and TCP/IP networked systems
- Pneumatic timing mechanism operates independent of electrical supply variations
$321.00 $196.99 Save $124.01
Access Control
Access control systems secure doors, manage credentials, and enforce entry policies across commercial facilities. Build a scalable deployment with the right combination of controllers, readers, credentials, and door hardware.
Plan Your Deployment
- Door count and expansion requirements
- Reader type (card, keypad, biometric) and credential format
- Fail-safe vs fail-secure hardware design
- Power, cabling, and network connectivity planning
- Multi-site governance and consistent standards
Build a Complete System
Most access control installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.

















