Camden

SKU: CM-4000/51N

Camden N/C switch block and contact for - CM-4000/51N

• N/C configuration keeps doors locked by default, maintaining security through power loss.
• Rated 30VDC — direct drop-in with standard electric strike and mag-lock power supplies.
• TCP/IP communication supports multi-controller campus deployments without serial daisy-chaining.

Camden

SKU: CM-4000/54N

Camden N/O \& N/C switch block and contact for - CM-4000/54N

• Dual N/O and N/C relay outputs let you wire failsafe and failsecure locks on one door.
• 30VDC contact block drives electric strikes and mag-locks without an external power supply.
• Expands CM-4000 through CM-8000 controllers with no extra harness or wiring adapters needed.

Camden

SKU: CM-4000/50N

Camden N/O switch block and contact for - CM-4000/50N

• N/O relay holds fail-secure on strikes and maglocks when power is lost.
• Supports DESFire, MIFARE, HID iClass, SEOS, and 125kHz prox on one reader.
• TCP/IP integration enables real-time credential updates across CM-3000–8000 controllers.

Camden

SKU: CM-25

Camden Narrow push plate switch vertical mounting - CM-25

• ADA-compliant low-actuation-force design suits high-traffic accessible entryways.
• Rated 3A @ 30VDC SPST N.O.; compatible with electric strikes and mag-locks.
• Mounts in a standard double gang box; stainless steel build for durability.

Camden

SKU: CX-ED1959-MB

Camden Outdoor rated Grade 1 strike for exterior - CX-ED1959-MB

• Grade 1 / ANSI A156.3 rated; delivers 1,500 lb static and 70 ft-lb dynamic holding force.
• 12/24VDC selectable (280mA / 140mA) adapts to existing power supply architectures.
• Fail-safe or fail-secure mode is jumper-selectable, supporting egress and lockdown protocols.

Camden

SKU: CX-ED1959RM-MB

Camden Outdoor rated Grade 1 strike for use - CX-ED1959RM-MB

• Outdoor-rated for gate and fence installs—no extra weatherproof enclosure needed.
• 12VDC/24VDC field-selectable; 24V at 140 mA cuts wire-gauge costs on long cable runs.
• Fail-safe or fail-secure configurable at install to meet AHJ, NFPA 70, and UL 1034 codes.

Camden

SKU: CM-120TX

Camden Outdoor vandal resistant metal backlit keypad - CM-120TX

• Battery-operated 915 MHz wireless eliminates conduit runs in outdoor deployments.
• Supports 999 unique PIN codes with 1–8 digit variable-length entries per user.
• Stainless steel vandal-resistant faceplate installs flush in a standard single-gang box.

Camden

SKU: CM-120wV2

Camden Outdoor vandal resistant metal backlit keypad - CM-120wV2

• Vandal-resistant metal housing and backlit keypad sustain outdoor exposure reliably.
• Wiegand output integrates directly with standard access control panels and door strikes.
• Supports up to 999 users and accepts HID credentials on 24VDC power.

Camden

SKU: CM-4040

Camden Push/Pull N/C Maintained Red Only - CM-4040

• Fail-secure N/C logic locks immediately on power loss, eliminating solenoid fatigue.
• Push/pull mechanism supports both door swing orientations from a single strike unit.

Camden

SKU: CM-5040

Camden Push/Pull N/C Maintained Red Only - CM-5040

• Fail-secure N/C logic stays locked on power loss, eliminating relay-chatter unlock risk.
• 30VDC operation integrates directly with standard access control power supplies.
• Push/pull mechanism supports either door swing direction without mechanical reversal.

Camden

SKU: CM-4050

Camden Push/Pull N/O \& N/C Maintained Red Only - CM-4050

• Dual N/O & N/C maintained contacts eliminate external relay wiring for fail-safe or fail-secure logic.
• Rated 15A @ 30VDC continuous — verify panel strike driver sustains load without voltage sag.
• Accepts push-to-open and pull-to-open frame mounting in a compact 4.50" × 4.50" × 1.75" body.

Camden

SKU: CM-5050

Camden Push/Pull N/O \& N/C Maintained Red Only - CM-5050

• Dual N/O & N/C outputs let you wire fail-safe and fail-secure from one device.
• Maintained 30VDC action holds unlocked state without relay flicker or secondary logic.
• 6A switching capacity supports direct solenoid or relay coil control at the strike.

Camden

SKU: CM-4030

Camden Push/Pull, N/O, Maintained, Red Only

Push/pull strike lock, 30VDC maintained, red indicator for door access

• Normally open maintained operation engages continuously when 30VDC powered
• Push/pull control integrates into doorframe installations for access control
• Red-only indicator provides visual status feedback during lock operation

Camden

SKU: CM-5070

Camden Push/Turn to Release N/C Maintained Red Only - CM-5070

• N/C maintained contact rated 6A @ 30VDC sustains release while coil remains energized.
• 2 3/8" red push/turn button provides mechanical egress independent of panel power or network.
• Bayonet interlocking design stacks contact blocks for auxiliary door sensor or alarm bypass.

Camden

SKU: CX-ESF-3BR

Camden Radius Hollow Metal. Face plate for - CX-ESF-3BR

• Brushed aluminum finish resists fingerprints and blends with standard commercial hardware.
• Pre-drilled mounting holes align with CX series strike assemblies for consistent bolt travel.
• Designed for hollow metal door frames, bridging magnetic lock strikes to the frame surface.

Camden

SKU: CM-6040

Camden Red Push To Lock Key To Release N/C Maintained - CM-6040

• Push-to-lock, N/C maintained logic keeps door secured whenever 30VDC power is present.
• Key-release mechanical override enables emergency egress or maintenance without system access.
• Red housing aids low-light visibility; fits double-gang and 4×4 box preparations.