Camden

SKU: CI-1KX

Camden Diecast aluminum enclosure, painted gray enamel, NEMA 1, 2, ...

Diecast aluminum enclosure, NEMA 1/2 rated, DIN rail mount

• Gray painted enamel finish resists corrosion in indoor environments
• Compact metal housing accommodates access control wiring and modules
• DIN rail compatible mounting for standard security panel integration

Camden

SKU: CI-SCP1

Camden Diecast Aluminum Enclosure, SPDT Momentary, 15 A @ 240 VAC, ...

Diecast aluminum SPDT momentary enclosure rated 15 A @ 240 VAC

• SPDT momentary contact for access control, gate, and door strike applications
• 15 A @ 240 VAC electrical rating with diecast aluminum construction
• Indoor/outdoor wall and ceiling mounting for industrial switching circuits

Camden

SKU: CX-DA100

Camden Door alarm sounder single gang 3-24 VDC - CX-DA100

• 95 dB local alert triggers after a configurable 0–60 second door-prop delay.
• Fits standard single-gang backbox; operates on 12 or 24 VDC at only 18 mA draw.
• Relay output (30 VDC @ 500 mA) integrates with third-party TCP/IP alarm panels.

Camden

SKU: CX-DA300

Camden Door alarm with relay and reset key double - CX-DA300

• Operates on 24VDC, sourcing directly from existing access control power supplies.
• TCP/IP communication enables remote monitoring within IP-connected security platforms.
• Relay output and manual reset key support field alarm acknowledgment and device control.

Camden

SKU: CX-DA200

Camden Door alarm with relay single gang 12/24V AC/DC - CX-DA200

• Triggers 80 dB local alarm and energizes N/C SPST relay on any door contact open.
• Adjustable 0–30 sec delay reduces nuisance trips in high-traffic entry points.
• Runs on 12/24V AC/DC; fits single-gang boxes alongside readers with no firmware needed.

Camden

SKU: CX-DA400

Camden Door alarm with relays timers reset key double - CX-DA400

• Dual relay outputs control strikes, buzzers, or auxiliary devices from a single unit.
• TCP/IP communication enables remote monitoring and command execution over the network.
• Reset key provides manual override for emergency access without network dependency.

Camden

SKU: CM-AF540SO

Camden Double gang, push/pull mushroom push button, red, \

Double gang red mushroom button for TCP/IP networked access control

• Push/pull mushroom design with red button for tactile feedback at entries
• TCP/IP networked communication integrated with HID credential systems
• 12VDC operation suits both retrofit and new access control installations

Camden

SKU: CM-1000/47

Camden DPDT maintained contact switch 6 A @ 125 VAC - CM-1000/47

• DPDT maintained contact latches in position, controlling two circuits simultaneously.
• Rated 6 A @ 125 VAC / 3 A @ 30 VDC — drives most EM locks and strikes without a relay.
• Accepts standard 1"–1¼" mortise cylinders, integrating into existing master key systems.

Camden

SKU: CM-1000/42

Camden DPDT momentary contact switch 6 A @ 125 V 3 - CM-1000/42

• DPDT momentary closure prevents sustained strike energization, reducing life-safety risk.
• Dual rating (6A@125VAC / 3A@30VDC) works with AC strike and DC mag-lock supplies directly.
• Mortise cylinder mount (1"–1¼") enables key-controlled access without added hardware.

Camden

SKU: CM-45/20

Camden DPDT switch for CM-40 41 45 60 series rated 15 - CM-45/20

• DPDT switch with 15A at 30VDC for CM-40/41/45/60 series controllers
• Two independent circuits per relay for strike plus REX dual control
• Drops into standard Camden access control hardware deployments

Camden

SKU: CX-ED1799L-8-BK

Camden Dual monitor strike body with (2) - CX-ED1799L-8-BK

• Dual integrated monitor switches deliver independent real-time door status feedback.
• 12VDC operation integrates directly with standard access control power supplies.
• HID credential compatibility enables drop-in deployment within existing HID ecosystems.

Camden

SKU: CM-PT250AL-DUR-18

Camden Duranodic (dark bronze) finish 18\" - CM-PT250AL-DUR-18

• 1/4-in bore fits 4-conductor 22 AWG or 2-conductor 18 AWG door control wiring.
• Anodized Duranodic dark bronze finish resists corrosion and salt spray on exterior doors.
• 18-in fixed length conceals wiring on surface-mount and recessed doorframe installations.

Camden

SKU: CM-PT375AL-DUR-18

Camden Duranodic (dark bronze) finish 18\" - CM-PT375AL-DUR-18

• 3/8" ID fits up to 16×22 AWG or 8×18 AWG conductors in a single conduit run.
• 18" length matches standard frame-to-striker spans, eliminating field cutting or excess slack.
• Anodized dark bronze aluminum resists corrosion and blends with commercial door hardware finishes.

Camden

SKU: CX-ED1309

Camden Electric Strike Body Only Order Face Plate - CX-ED1309

• Grade 1 ANSI/BHMA A156.31 rated for commercial storefront and narrow stile aluminum frames.
• Field-selectable 12/24V AC/DC and fail safe or fail secure mode reduces installation variables.
• UL 1034 and UL 294 listed; accepts cylindrical or spring latch with 1/2"–5/8" projection range.

Camden

SKU: CX-ED1379

Camden Electric Strike with (1) CX-ESF-2 and (1) - CX-ED1379

• TCP/IP connectivity eliminates relay modules and wires directly into Ethernet networks.
• Includes two ANSI round faceplates fitting 6-11/16" and 8-3/8" openings for fast install.
• 5-year manufacturer warranty covers materials and workmanship on all components.

Camden

SKU: CV-CSE

Camden EM Format clam shell Prox. Card Package of 10 - CV-CSE

• Dual OSDP/Wiegand output integrates into both modern encrypted and legacy panel systems.
• 125kHz HID-format reading works with existing card stock across virtually all platforms.
• 10-unit pack covers a full 10-door deployment in a single procurement cycle.