STI

SKU: KIT-G101598

STI KIT-G101598 Gasket for Electric Strike

• Direct replacement gasket restores seal integrity on STI-6518 electric strike assemblies.
• Rated for 9VDC systems, ensuring electrical compatibility with existing power supplies.
• Supports HID credential reader installations, maintaining access control continuity.

STI

SKU: KIT-G82599

STI KIT-G82599 Gasket for STI-6516 Electric Strike

• Restores weatherproofing on the STI-6516 electric strike, blocking moisture and dust intrusion.
• Designed specifically for the STI-6516 9VDC strike — geometry ensures proper seating and full seal.
• No special tools required; installs between strike body and cover plate using standard fasteners.

STI

SKU: KIT-M02002

STI KIT-M02002 Clear Frame for Stopper II Electric Strike

• Clear polycarbonate construction allows strike status inspection without removing cover.
• Mounts directly over Stopper II assembly using four fixing points drilled into masonry.
• Draws no independent power; operates at 9V DC through existing access control circuit.

STI

SKU: KIT-E18151

STI N.C. Reed Switch and Magnet for STI-SA5000 - KIT-E18151

STI

SKU: NT-CA100-EN

STI NoTouch® Cast Aluminum Switch with Three - NT-CA100-EN

• Infrared hand-wave trigger (1.5–6 in.) eliminates mechanical wear in high-traffic entries.
• Form C relay (0.5A@120VAC / 1A@24VDC) integrates directly with EM locks and strike panels.
• Three included snap-in lenses enable zone labeling without hardware swaps on retrofit installs.

STI

SKU: NT-SS000-EN

STI NoTouch® Stainless Steel Switch Slim/Mullion - NT-SS000-EN

• Infrared detection (4–15 cm range) enables hands-free door release with zero contact.
• Form C relay (1A @ 24VDC) drives electric strikes, maglocks, or gate operators directly.
• IP65-rated 304 SS faceplate survives institutional wash-downs; latch adjustable 0.5–20 sec.

STI

SKU: NT-SS001-EN

STI NoTouch® Stainless Steel Switch Slim/Mullion - NT-SS001-EN

• IP65-rated 304 stainless steel housing withstands splash and heavy-use environments.
• Form C dry contact relay integrates with any 12VDC/24VDC strike, mag-lock, or access panel.
• Adjustable 0.5–20 sec relay latch and 1.5–6 in. detection range simplify site-specific tuning.

STI

SKU: NT-SS002-EN

STI NoTouch® Stainless Steel Switch Slim/Mullion - NT-SS002-EN

• Form C dry contact (0.5A @ 120VAC / 1A @ 24VDC) ties directly into existing lock circuits.
• IP65-rated 304 stainless housing supports mullion retrofit without frame modification.
• Adjustable 0.5–20 s relay latch delay matches door-closer timing; IR range 1.5–6 inches.

STI

SKU: NT-SS002-FR

STI NoTouch® Stainless Steel Switch Slim/Mullion - NT-SS002-FR

• Infrared NoTouch activation eliminates contact, reducing cross-contamination in high-traffic areas.
• 12VDC operation integrates directly with existing strikes, maglocks, and access control panels.
• Slim mullion form factor with integrated back box retrofits standard door frames with minimal modification.

STI

SKU: NT-SS200-EN

STI NoTouch® Stainless Steel Switch, US Double-Gang, Door Symbol

Contactless stainless steel switch for access control and automatic doors

• NoTouch® infrared activation eliminates hand contact in high-traffic areas
• Stainless steel construction resists corrosion for indoor and semi-outdoor use
• 12VDC operation compatible with standard access control and door systems

STI

SKU: NT-SS100-EN

STI NoTouch® Stainless Steel Switch, US Single-Gang, Door Symbol

Hands-free stainless steel switch with door symbol for access control

• Contactless NoTouch® activation reduces surface contact in high-traffic areas
• 12VDC operation with IP65 rating for healthcare and secure entry points
• Stainless steel construction resists corrosion in demanding environments

STI

SKU: NT-SS101-EN

STI NT-SS101-EN NoTouch Stainless Steel Switch Single-Gang EXIT

Contactless stainless steel exit switch, 12VDC, IP65 rated

• NoTouch activation eliminates physical contact for high-traffic areas
• Stainless steel construction with IP65 rating for durability
• Single-gang US form factor integrates with standard access control systems

STI

SKU: NT-SS101-FR

STI NT-SS101-FR NoTouch Stainless Steel Switch Single-Gang EXIT

Stainless steel contactless EXIT switch for touchless access control

• 12VDC single-gang switch eliminates hand contact in high-traffic areas
• IP65-rated stainless steel construction resists moisture and hygiene risks
• IR motion sensing activates EXIT function without physical touch points

STI

SKU: NT-SS102-EN

STI NT-SS102-EN NoTouch® Stainless Steel Switch US Single-Gang

Hands-free stainless steel switch for access control, no touch required

• Contactless activation eliminates physical contact points in high-traffic areas
• Stainless steel construction rated IP65 for durability in wet environments
• 12VDC operation integrates with standard access control and door strike systems

STI

SKU: NT-SS201-EN

STI NT-SS201-EN NoTouch Stainless Steel Switch Double-Gang EXIT

Touchless stainless steel exit switch for hands-free access control

• Infrared sensor activation eliminates contact points in high-traffic areas
• Stainless steel housing resists corrosion in wet and humid environments
• 12VDC relay output with double-gang config fits standard electrical boxes

STI

SKU: NT-SS202-EN

STI NT-SS202-EN NoTouch Stainless Steel Switch Double-Gang

• IP65-rated 304 stainless steel faceplate withstands washdowns in healthcare and food-service zones.
• Form C dry contact (0.5A/120VAC, 1A/24VDC) integrates directly with mag locks and relay-driven strikes.
• Dual-gang IR detection at 1.5–6 in controls two independent circuits from one plate on 12VDC/45mA draw.