Camden

SKU: CM-1290

Camden CM-1290 DPDT Maintained Key Switch

• DPDT contacts let you simultaneously control two independent circuits without cross-wiring.
• Maintained design holds circuit state after key release, enabling sustained bypass functions.
• Rated 30VDC — drops directly into 24V/30V access control loops with no step-down required.

Camden

SKU: CM-1292

Camden CM-1292 Key Switch DPDT Maintained

• DPDT maintained contacts hold state without powered relay, reducing panel logic complexity.
• 30VDC rating integrates directly with standard access control panel power supplies.
• Mortise cylinder mount accepts 1"–1¼" cylinders for flush, tamper-resistant frame installs.

Camden

SKU: CM-2000

Camden CM-2000 Key Switch SPST Momentary N/O

• 30VDC SPST N/O contact drives door strikes or mag-locks with no relay required.
• 1.75" flush-mount body fits tight door jambs where 2.75" switches cannot install.
• 1/4" die-cast aluminum housing accepts standard 1"–1-1/4" mortise cylinders.

Camden

SKU: CM-2000/21

Camden CM-2000/21 Narrow Neoprene Gasket for Push Buttons

• Neoprene construction resists UV, ozone, and temperature cycling for lasting outdoor seals.
• Narrow profile fits constrained door frame cutouts without requiring frame modification.
• Rated for 30VDC proximity reader circuits, maintaining a moisture barrier at button contacts.

Camden

SKU: CM-2005

Camden CM-2005 Key Switch SPST Momentary N/C

Key-switched SPST momentary control for networked access at 30VDC

• Normally closed (N/C) contacts with momentary activation for door strike control
• TCP/IP communication with HID credential integration for access systems
• 30VDC rated for compatibility with standard access control power supplies

Camden

SKU: CM-2010

Camden CM-2010 Key Switch SPST Maintained

• SPST maintained contact holds circuit state at 30VDC without repeated actuation.
• Die-cast 1/4-inch aluminum body resists tampering and corrosion at outdoor entries.
• Mortise cylinder fits 1", 1-1/8", or 1-1/4" bores for master-key system integration.

Camden

SKU: CM-2020

Camden CM-2020 Key Switch SPDT Momentary

SPDT momentary key switch for HID access control at 30VDC

• Single-pole, double-throw contact for door lock and strike integration
• 30VDC operation compatible with HID credential reader systems
• Momentary activation for electromagnetic locks and solenoid strikes

Camden

SKU: CM-2030

Camden CM-2030 Key Switch SPDT Maintained

• SPDT maintained contact holds relay closed while key is turned, enabling reliable manual override.
• 30VDC rating integrates directly with commercial lock supplies—no intermediate network layer needed.
• One-piece die-cast aluminum body fits 1¾" openings and accepts standard mortise cylinders.

Camden

SKU: CM-2050

Camden CM-2050 Key Switch with Dual SPDT Momentary

• Dual independent SPDT circuits enable simultaneous control of two separate door devices.
• Momentary-only action prevents continuous lock bypass — circuit closes only while key is held.
• Operates at 30VDC, integrating directly with standard 24–30V mag locks and electric strikes.

Camden

SKU: CM-2060

Camden CM-2060 Key Switch SPDT Maintained Contact

Key-operated SPDT switch with dual relays, 30VDC, HID compatible

• Dual independent SPDT relays for simultaneous control of two circuits
• Maintained contact design holds signal stable while key is engaged
• 30VDC operation integrates with standard access control power supplies

Camden

SKU: CM-2090

Camden CM-2090 Key Switch DPDT Maintained

DPDT maintained key switch with HID credential auth over TCP/IP

• 30VDC operation with latching contact for continuous strike control
• HID credential authentication integrated over TCP/IP network communication
• Compatible with TCP/IP-enabled access control platforms and door locks

Camden

SKU: CM-2200

Camden CM-2200 Key Switch SPST Momentary N/O

• SPST momentary N/O contact delivers clean single-pulse triggering at 30VDC.
• Compact 1¾" flush-mount housing fits tight door frames without frame modification.
• Accepts 1", 1⅛", or 1¼" mortise cylinders for straightforward key standardization.

Camden

SKU: CM-221/46

Camden CM-221/46 ValueWave Touchless Switch Single Gang

• Adjustable 2–8 in. IR detection range minimizes false triggers in high-traffic corridors.
• Form C dry relay (1A @ 30VDC) drives EM locks directly or feeds access control panel inputs.
• 10ms relay response and IP65 sealing suit sterile, wash-down, and high-volume entry points.

Camden

SKU: CM-221/46N

Camden CM-221/46N ValueWave™ Touchless Switch Narrow Jamb

• IR activation at 2–8 inches eliminates contact, reducing cross-contamination risk.
• Form C relay output (1A @ 30VDC) drives EM locks and door operators without added modules.
• IP65 rating supports washdown environments including restrooms, kitchens, and wet areas.

Camden

SKU: CM-221/46W

Camden CM-221/46W ValueWave™ Touchless Switch Double Gang

• IR touchless activation eliminates contact surfaces, reducing hygiene risk in high-traffic entries.
• TCP/IP connectivity enables remote audit logging and emergency unlock from access-control panels.
• Double-gang form factor fits standard wall boxes, simplifying retrofits at dual-door access points.

Camden

SKU: CM-221/A42

Camden CM-221/A42 ValueWave Touchless Switch Single Gang

Network touchless switch with HID credentials and electromagnetic lock control

• TCP/IP connectivity for remote access management and real-time door status
• HID-compatible credentials integrate with existing card reader infrastructure
• 30VDC electromagnetic strike in single-gang form factor for retrofit installations