Pelco · LPR-VS-VPS-PT-01-1YR

Pelco Parking Enforcement System Toolkit - LPR-VS-VPS-PT-01-1YR

Managing parking enforcement across multiple lots or zones requires coordinated license plate recognition that integrates seamlessly with your

• One-year VideoXpert-native license deploys ANPR enforcement without standalone LPR hardware.
• Automates permit validation and violation detection across time-limit, permit, and restricted zones.
• API layer connects citation workflows directly to third-party management and payment platforms.

Pelco · SM-WIN10-4139

Pelco SMR IDRAC Enterprise Lic Upgrade SMR-58 - SM-WIN10-4139

N IDRAC Enterprise license upgrade designed for SMR-58 surveillance management systems

• Unlocks out-of-band remote access on SMR-58 systems without physical console access.
• Enables advanced hardware diagnostics and firmware updates across networked SMR-58 nodes.
• One license per node required; activation via iDRAC web interface with no hardware changes.

Pelco · SP01-001-AW

Pelco Smr Pole Top Mt Pendant Uk Pantone 427C - SP01-001-AW

When you're deploying Pelco Spectra dome cameras on poles in outdoor environments, mounting hardware needs to handle both the physical load and

• Purpose-built pole-top pendant mount designed for Pelco Spectra and Sarix domes.
• Powder-coated steel construction withstands outdoor environmental stress long-term.
• Pantone 427C light gray finish meets UK municipal and commercial consistency standards.

Pelco · SRXE4-2V29-EMD-IR1

Pelco SRXE4-2V29-EMD-IR1 2MP Sarix Environmental IR Dome

Reliable 2MP imaging in demanding environmental conditions, combining infrared night vision with robust weatherproof construction for 24/7

• IP67/IP68 and IK11-rated housing withstands full water immersion and impact in harsh sites.
• H.265/H.264 with SmartCompression cuts bandwidth and storage costs without dropping 2MP clarity.
• PoE+ (802.3at) via RJ-45 simplifies single-cable deployment across six mounting configurations.

Pelco · SRXE4-4V9-EMD-IR1

Pelco SRXE4-4V9-EMD-IR1 2MP Sarix Environmental IR Dome

2MP Sarix Enhanced 4 Series environmental dome built for outdoor and harsh-climate perimeter surveillance where impact resistance and full

• IP67/IP68 and IK11-rated housing withstands full water immersion and hard impacts.
• 2.8–12mm motorized varifocal lens with 850nm IR delivers 2MP detail in zero-light conditions.
• ONVIF S/T/M/G and PoE+ (802.3at) enable drop-in integration with existing NVRs and switches.

Pelco · SRXE4-4V9-EMD-IR1-B

Pelco SRXE4-4V9-EMD-IR1-B 2MP Sarix Enhanced Camera

Reliable 2MP imaging with advanced infrared night vision and rugged IP67/IP68 environmental protection, making it ideal for demanding indoor and

• IP67/IP68 and IK11 ratings withstand water immersion, dust, and vandal impacts.
• H.265/H.264 dual compression with smart bandwidth management reduces storage overhead.
• ONVIF-compliant with PoE+ (802.3at) simplifies VMS integration over a single RJ-45 run.

Pelco · LPR-VS-SHP-02

Pelco Vigilant Shipping Charges - Fixed or Comms - LPR-VS-SHP-02

Service charge line item for shipping costs associated with Vigilant system deployments

• Administrative line item covers shipping costs for Vigilant system deployments.
• Applies to fixed or communication-based shipping models depending on procurement type.
• Include this SKU on purchase orders alongside Vigilant cameras, recorders, and accessories.

Pelco · VSF-L6Q-P-KIT

Pelco VSF-L6Q-P-KIT 1MP Quick Deploy Camera 12VDC

1MP day/night camera built for rapid field deployment where PoE infrastructure may not exist or is impractical to run

• IP67-rated housing withstands dust and water jets for exposed outdoor installs.
• Pole-mount hardware included; deploys on 1.5–3-inch posts without separate brackets.
• 12VDC input and ONVIF support integrate with existing VMS and regulated DC supplies.

Pelco · VSF-L6Q-S-KIT

Pelco VSF-L6Q-S-KIT L6Q Quick Deploy Camera Solar Kit

Complete solar power system designed to enable the L6Q camera to operate in locations without grid power access

• L6Q solar power kit for off-grid camera deployments
• Pole-mount solar charging for IP67 outdoor cameras
• Eliminates trenching for power runs to remote sites

Pelco · INT-JCI

Pelco VX integration of Johnson Controls P2000 - INT-JCI

Software integration module that bridges Pelco VideoXpert video management with Johnson Controls P2000 access control systems

• Links P2000 access events to VideoXpert recordings, eliminating manual video correlation.
• Pure software deployment—no new hardware or cabling beyond existing network infrastructure.
• Verify VX and P2000 firmware against the version matrix before install to avoid handshake failures.

Pelco · VX-CONNECT

Pelco VX-CONNECT Video Stream Export Module

Stand-alone software service that bridges VideoXpert video management systems to third-party clients and external platforms

• Relays VideoXpert streams to RTSP clients with zero custom integration code required.
• Built-in Administration Portal handles credential validation and permission enforcement.
• ONVIF support enables automated camera discovery for compatible third-party platforms.

PioneerPOS · 4HW-CBA04

PioneerPOS Battery Charging Station 4 Trays - 4HW-CBA04

Multi-device battery charging station designed for retail and hospitality environments running mobile point-of-sale operations

• Charges up to four BAT01, BAT02, or BAT03 batteries simultaneously from one station.
• Hot-swap trays allow battery rotation without powering down, sustaining uptime during peak hours.
• Compact white chassis supports countertop or wall-mount deployment in space-constrained POS areas.

PioneerPOS · 16-M5-PSFSP150

PioneerPOS Bracket for power supply PSFSP1501 - 16-M5-PSFSP150

Mounting bracket designed to secure the PioneerPOS PSFSP1501 power supply in fixed installations

• Secures the PSFSP1501 150W/12VDC supply to fixed surfaces, reducing clutter at primary devices.
• Engineered exclusively for the PSFSP1501 — eliminates compatibility guesswork during panel builds.
• Supports DIN-rail and panel-edge mounting common in commercial surveillance enclosures.

PioneerPOS · 10-KBP-KIT-P6

PioneerPOS C1 Kiosk Printer kit for STEP-5e - 10-KBP-KIT-P6

Printer kit designed to integrate thermal printing capability into the STEP-5e kiosk platform

• Designed exclusively for STEP-5e, ensuring direct chassis integration without adapters.
• Draws power from the kiosk's internal supply — no external power source required.
• Enables embedded thermal receipt, ticket, or label output at the point of transaction.

PioneerPOS · 49B-KBP098-06

PioneerPOS C1 Kiosk Step-5e Prt USB PSU - 49B-KBP098-06

Dedicated desktop power supply unit engineered for the C1 Kiosk Step-5e printer subsystem

• USB power delivery eliminates separate wall adapters, reducing countertop cable clutter.
• 100–240V AC universal input supports single-SKU deployment across domestic and international sites.
• Verified compatible with C1 ST3 and ST4 enclosures; not cross-compatible with other PioneerPOS lines.

PioneerPOS · 49B-KBP100-06

PioneerPOS C1 Kiosk Step-5e Prt USB PSU Desktop - 49B-KBP100-06

Regulated desktop power supply engineered for the C1 Kiosk Step-5e thermal receipt printer platform

• Universal AC 90–264V input eliminates manual voltage selection across NA and international sites.
• Built-in thermal and short-circuit protection prevents printer faults from voltage sag or noise.
• Native USB output connects C1 Step-5e printer and peripherals without intermediate hubs.

PioneerPOS · QEQ-QBC-01

PioneerPOS CT30 Quad Battery Charger kit includes - QEQ-QBC-01

Quad battery charger kit designed for PioneerPOS CT30 mobile payment terminals

• Charges four CT30 batteries simultaneously, supporting uninterrupted shift rotations.
• Included power supply unit eliminates sourcing a separate adapter during deployment.
• Compatible with all CT30 battery configurations, simplifying multi-unit site installs.

PioneerPOS · QEL-CTS01

PioneerPOS EDA10A single charging dock inclues Dock - QEL-CTS01

Single charging dock designed for the EDA10A mobile device

• Designed exclusively for the EDA10A, ensuring verified mechanical and electrical fit.
• Includes USB cable and 5V 2A power adapter, enabling immediate out-of-box deployment.
• Single-unit dock configuration supports fixed-location daily recharge cycles with no extra hardware.

PioneerPOS · 49G-PRT201-03

PioneerPOS Impact Kitchen Prt Gray PSU Ethernet - 49G-PRT201-03

N impact kitchen printer designed for point-of-sale and kitchen-order-ticket environments where durability and rapid order dispatch are non-negotiable

• Integrated Ethernet port enables direct network connection without additional adapters.
• Bundled PSU ships in-box, reducing BOM complexity for kitchen station deployments.
• Gray finish suits commercial kitchen environments and resists visible surface wear.

PioneerPOS · QDL-70311

PioneerPOS Iport Power Supply 15V 2A - White - QDL-70311

15V 2A (30W) regulated power supply designed for PioneerPOS Iport point-of-sale and peripherals

• Delivers regulated 15V DC at 2A (30W) for stable PioneerPOS Iport peripheral operation.
• Direct-plug replacement for 120V AC environments; no additional adapter hardware required.
• White finish matches PioneerPOS Iport aesthetics for clean front-of-house deployments.

PioneerPOS · QDL-71023

PioneerPOS Luxe USB Power Supply 5V 2.4A White - QDL-71023

5V 2.4A USB power supply in white finish, designed to power low-voltage devices in point-of-sale, access control, and surveillance environments

• Delivers fixed 5V 2.4A output, covering single-device loads up to 12W.
• Compact form factor avoids blocking adjacent outlets in dense panel installs.
• White casing integrates cleanly with standard retail and office wall finishes.

PioneerPOS · 49B-MX-U3201

PioneerPOS Mag. card reader 3tks USB Black MX22 - 49B-MX-U3201

3-track magnetic card reader designed for point-of-sale, access control, and timekeeping integration

• Reads all three ISO/ABA mag stripe tracks, covering badges, loyalty, and ID cards.
• USB bus-powered at 5V — no external supply needed, simplifying counter and kiosk installs.
• Keyboard-wedge and raw HID output modes enable driver-free integration with POS and access systems.

PioneerPOS · STLH-PSEA11301K

PioneerPOS Power supply 150W 110-220V - STLH-PSEA11301K

150W switching power supply rated for dual input voltage (110–220V AC), designed to power PioneerPOS M5 point-of-sale and surveillance systems

• 150W capacity supports multi-device loads: cash drawer, scanner, PIN pad, and cameras.
• Auto-sensing 110–220V AC input eliminates step-down transformers across global sites.
• Designed for PioneerPOS M5 systems; verify aggregate draw stays within 150W envelope.

PioneerPOS · 16-M5-105A

PioneerPOS Power Supply Bracket (for STLH-PSFSP150 - 16-M5-105A

Mounting bracket designed to securely affix the STLH-PSFSP150 power supply unit

• Designed specifically to mount the STLH-PSFSP150 power supply within the base unit.
• Factory-new condition ensures dimensional accuracy and fit for clean, reliable installation.
• Full US warranty path supported through direct manufacturer sourcing for integrator confidence.

PioneerPOS · T3P-RFR202

PioneerPOS Proximity RFID Reader Dual Band USB-A - T3P-RFR202

Proximity RFID reader designed for retail POS terminals, hospitality self-service kiosks, and access-control integration points

• Dual-band 125 kHz and 13.56 MHz support bridges legacy and NFC/MIFARE deployments.
• USB-A plug-and-play eliminates external power supplies and serial adapters at the terminal.
• Sub-100 ms read cycles sustain high-throughput card processing at busy POS lanes.

PioneerPOS · T3S-RFR104

PioneerPOS RFID Reader (Keyboard Output) for T3S - T3S-RFR104

Dual-frequency RFID reader designed for T3S POS terminals and retail point-of-sale environments

• Dual-frequency 13.56 MHz and 125 kHz support eliminates need for separate readers.
• USB keyboard emulation requires no drivers or middleware for instant POS integration.
• Bus-powered USB-A connection simplifies deployment on T3S terminals without adapters.

PioneerPOS · Q12-T3P-RFR200

PioneerPOS RFID Reader 125kHz & 13.56MHz USB-A - Q12-T3P-RFR200

USB-connected RFID reader designed for access control, healthcare credentialing, and credential verification workflows

• Reads both 125kHz (EM4100/4200) and 13.56MHz (Mifare, ISO 14443A/B, NFC) from one unit.
• USB-A plug-and-play connection requires no external power supply or serial adapter.
• Supports mixed-credential facilities, eliminating duplicate hardware during card migrations.

PioneerPOS · 49B-B1-RF001

PioneerPOS RFID Reader USB Dual Band - 49B-B1-RF001

USB-attached RFID reader designed for retail point-of-sale systems, warehouse inventory management, and asset tracking workflows

• Dual-band RFID handles mixed legacy and modern tag standards in one unit.
• USB interface enables plug-and-play integration with any POS terminal or workstation.
• No external power supply or controller board required, reducing deployment complexity.

PioneerPOS · T7-UPB101

PioneerPOS RL14 Battery charger 2 slots 1YR - T7-UPB101

2-slot battery charger designed to handle RL14 batteries — the type used in mobile scanners and portable handheld terminals common in retail and

• Dual-slot design charges two RL14 batteries simultaneously, supporting hot-swap workflows.
• Parallel charging cuts turnaround time across multi-shift deployments of handheld terminals.
• 1-year manufacturer warranty covers defects on this RL14-specific charging unit.

PioneerPOS · CB10010011

PioneerPOS Step-5e Thermal Receipt Printer USB/Eth - CB10010011

Thermal receipt printer designed for high-volume point-of-sale and transaction environments where print speed, reliability, and cost of ownership

• Dual USB and Ethernet ports support single-terminal or multi-station network deployment.
• Thermal mechanism eliminates ink, ribbons, and moving print heads, reducing maintenance overhead.
• 80mm thermal stock compatibility and included power supply simplify counter-mount installation.

PioneerPOS · CB10010012

PioneerPOS Step-5e Thermal Receipt Printer USB/Ser - CB10010012

Compact thermal receipt printer designed for retail, hospitality, and transaction environments where receipt printing integrates with POS terminals

• Dual USB and RS-232 ports support modern and legacy POS hardware in the same deployment.
• Thermal print technology eliminates ink and ribbon costs on high-volume transaction sites.
• Ships with power supply and serial cable, reducing additional procurement before go-live.

PioneerPOS · T3-WMM101

PioneerPOS T3 Slim Wallmount Kit No PSU White - T3-WMM101

Wall-mount bracket kit designed for flush or offset mounting of PioneerPOS T3 Slim point-of-sale terminals

• Frees counter space by wall-mounting PioneerPOS T3 Slim terminals flush or offset.
• Ships without PSU, supporting retrofit installs where power is already provisioned.
• White finish integrates cleanly into retail and hospitality wall surfaces.

PioneerPOS · T5-UPB101

PioneerPOS T5 Charging station - T5-UPB101

Charging cradle designed for PioneerPOS T5 mobile computers and compatible barcode scanners used in retail, warehouse, and logistics operations

• Pogo-pin contact charging eliminates USB wear and loose-cable errors at shift handoff.
• Dock-and-go, one-handed placement cuts per-device setup time by 30–60 seconds per cycle.
• Purpose-built for PioneerPOS T5 form factor; supports full inter-shift recharge of 5,200 mAh battery.

PioneerPOS · STLH-PSEA1024P1

PioneerPOS TOM M5/M7 Power Supply 110-220V 36W - STLH-PSEA1024P1

36W power supply purpose-built for PioneerPOS TOM M5 and M7 point-of-sale terminals

• 36W output sized correctly for TOM M5 and M7 terminals — no over-provisioning.
• 110–220V auto-ranging input supports mixed-voltage retail and hospitality circuits.
• Purpose-built replacement eliminates compatibility guesswork on M5/M7 deployments.

Posiflex · 10121200009

Posiflex 10121200009 Cash Drawer Springs

Genuine OEM replacement spring assembly for Posiflex cash drawer units

• Genuine OEM spring assembly restores full mechanical performance to Posiflex drawers.
• Addresses worn-spring faults causing sluggish opens, incomplete ejection, or lock failure.
• Designed for high-volume retail and hospitality duty cycles; tech-serviceable replacement.

Posiflex · 10150076280

Posiflex 10150076280 Bill Weight Metal For Cr6000'sand 4210S

• Zinc-plated steel construction resists corrosion and withstands daily till use.
• Holds bills flat in the till, reducing miscounts and speeding cash reconciliation.
• Direct-fit replacement for Posiflex CR6000 series and CR4210S cash drawers.