Pelco VSF-L6Q-P-KIT 1MP Quick Deploy Pole Mount Camera
Overview
The Pelco VSF-L6Q-P-KIT is a 1MP day/night camera built for rapid field deployment where PoE infrastructure may not exist or is impractical to run. This model ships as a complete pole-mount kit — meaning it arrives with the pole-attach hardware, eliminating the need to source brackets separately. The 12VDC power requirement and self-contained form factor make it practical for temporary surveillance, event coverage, mobile operations, or distributed monitoring networks where speed of installation matters more than maximum resolution. The IP67 rating handles dust ingress and water jets, so it operates in exposed outdoor locations — loading docks, perimeter fences, construction sites, temporary command posts.
Compatibility
The VSF-L6Q-P-KIT is a complete standalone unit; it is not a mount or bracket for other cameras. It integrates with standard IP-based video management systems via standard ONVIF-compliant network connectivity. The 12VDC power input means it works with any industrial 12VDC regulated supply or PoE injector capable of delivering stable 12V to the camera's power connector. Pole mounting hardware is included in the kit, designed for standard mounting posts and bollards with typical diameters of 1.5 to 3 inches.
Installation Notes
Power the camera from a regulated 12VDC source rated for at least 2A minimum (actual draw depends on sensor activity and IR operation). Run network cable (standard Cat5e or better) separately from power lines to avoid induced noise. The IP67 enclosure means field wiring connections must use IP67-rated connectors or glands to maintain the rating — standard RJ45 exposed to weather will leak. Mount the pole hardware securely using the included fasteners; verify tightness before deploying in high-wind environments. Operating range is typically -40°C to 60°C, so verify your installation location stays within this band during seasonal extremes.
