Network Video Recorders (NVRs)
Sub categories
Showing Results for Network Video Recorders (NVRs)
-
Lifesafety Power
SKU: E5M-BOXED
Lifesafety Power E5M-BOXED LABEL Unified Power Sol.LABEL Unifie
- Consolidates 12VDC power distribution from a single enclosure, reducing wiring complexity.
- Delivers 8.5W output to cameras, readers, and auxiliary devices in one chassis.
- Enclosure form factor mounts in equipment racks near primary power entry points.
$120.00 $86.99 Save $33.01 -
Lifesafety Power
SKU: FPV4-E1
Lifesafety Power FPV4-E1 4A Ps/Enclosure
- 4A continuous output supports small-to-mid-scale IP camera or access control loads.
- 24VAC input aligns with standard security infrastructure transformers and panels.
- Single-enclosure distribution reduces wiring overhead and simplifies fault isolation.
$296.00 $194.99 Save $101.01 -
Lifesafety Power
SKU: RBE-BOXED
Lifesafety Power RBE-BOXED Rackmount Battery Enclosure 12VDC 8 Am
- Holds four 12VDC 8A batteries, centralizing backup power in a single rack chassis.
- Independent per-slot management allows battery replacement without taking the system offline.
- 19-inch rackmount form factor consolidates distributed battery storage, reducing cabling runs.
$557.00 $365.99 Save $191.01 -
Lifesafety Power
SKU: RD150-16/E
Lifesafety Power RD150-16/E 220VAC input Rackmount 150W pwr supp
- Switchable 12V/24V output powers mixed legacy and modern devices from one supply.
- 16 independently fused outputs isolate zone faults without dropping remaining circuits.
- 2U rackmount form factor integrates into standard 19-inch racks alongside network gear.
$799.00 $524.99 Save $274.01 -
Lifesafety Power
SKU: RD150/250
Lifesafety Power RD150/250 Rack Mount DC dual voltage
- Dual-rail output delivers 12V @ 12A and 24V @ 6A for mixed-voltage deployments.
- Rack-mount form factor consolidates power distribution and reduces cabinet clutter.
- Both rails operate simultaneously, supporting up to 144W per rail concurrently.
$1,136.00 $746.99 Save $389.01 -
Lifesafety Power
SKU: SD4P-BOXED
Lifesafety Power SD4P-BOXED FLEXPOWER SD4 SD16 Smart Distributio
- Device-level supervision detects circuit faults instantly, eliminating manual polling.
- Integrates natively with SD4 and SD16 platforms for staged, no-stranded-asset expansion.
- Ships pre-configured for immediate rack or wall mount, reducing on-site deployment time.
$158.00 $103.99 Save $54.01 -
NETGEAR
SKU: GS724T-600NAS
NETGEAR GS724T-600NAS 24PT GE Smart Switch
- All 24 Gigabit ports run simultaneously at full line rate on a 52 Gbps non-blocking fabric.
- 256 VLANs and IGMP snooping isolate camera, access control, and IT traffic on one switch.
- Two SFP uplink slots support fiber backbone links without consuming edge Gigabit ports.
$398.26 $233.99 Save $164.27 -
NETGEAR
SKU: MS308E-100NAS
Netgear MS308E-100NAS 8PT Multigig Plus Switch
- Eight PoE++ (802.3bt) ports deliver up to 90W each for high-draw cameras and PTZ heads.
- MultiGig speeds (2.5G/5G/10G) let legacy 1G and modern endpoints share one unmanaged switch.
- Zero-configuration deployment with hardware bandwidth management suits lean-IT edge sites.
$352.07 $182.99 Save $169.08 -
Pelco
SKU: VXS2B-R0-N
Pelco VXS2B-R0-N 100-Channel NVR Video Recorder
100-channel NVR with configurable RAID storage and Windows Server 2019
- HDD/SSD agnostic design lets you choose drive type and RAID topology at deployment
- 32GB memory, enterprise SATA/SAS drive support for large-scale recording operations
- NDAA Section 889 compliant for federal and regulated security installations
$40,790.03 $29,282.99 Save $11,507.04 -
Pelco
SKU: VXS2C-E216-N12S
Pelco VXS2C-E216-N12S 216TB SAS NVR
216TB SAS NVR for 100-channel enterprise surveillance
- 216TB SAS storage with high sequential write for dense multi-camera recording
- 100 VideoXpert license channels on Dell PowerEdge R760XD2 with Intel processors
- Redundant power supplies and Windows Server 2019 for 24/7 mission-critical ops
$71,578.14 $53,169.99 Save $18,408.15 -
Pelco
SKU: VXS2C-E288-N16S
Pelco VXS2C-E288-N16S 288TB SAS NVR Server
288TB SAS enterprise NVR with 100-channel VideoXpert license
- 288TB SAS storage for continuous high-throughput recording across dense deployments
- Dell PowerEdge R760XD2 chassis with Intel E5 processor and 64GB memory
- Redundant power supplies and Windows Server 2019 for IT infrastructure integration
$92,081.83 $68,399.99 Save $23,681.84 -
Posiflex
SKU: 21972060129
Posiflex 21972060129 Adapter Power 12V 60W Ks/Xt L5+l V2
- OEM 12V/60W rail sustains full terminal load including printers and scanners.
- Purpose-built connector pinout eliminates intermittent faults from mismatched adapters.
- Stable voltage regulation protects NVRAM and prevents transaction log corruption.
$85.00 $51.99 Save $33.01 -
Speco Technologies
SKU: 2WAK4
Speco 2WAK4 Two-Way Audio Kit for DVR Systems
Two-way audio kit for DVR systems with ASPC20 power supply
- Bidirectional voice communication between DVR control station and remote locations
- Integrates directly into existing DVR camera infrastructure without separate wiring
- Supports facility access control, staff coordination, and live operator monitoring
$200.40 $199.99 Save $0.41 -
Speco Technologies
SKU: D16DSAUDCBL
Speco D16DSAUDCBL 16-Channel DVR Audio Cable
Direct-replacement audio cable for Speco 16-channel DVR systems
- Compatible with DS, HS, NS, and NSP series DVR platforms
- Plug-and-play installation with audio input connectors
- White housing designed for standard DVR security installations
$40.80 $39.99 Save $0.81 -
Speco Technologies
SKU: D16VN
Speco D16VN 16-Channel 4K TVI DVR
16-channel 4K TVI DVR with TAA/NDAA compliance for federal security
- 16 simultaneous 4K (3840×2160) channels with full-frame recording across all inputs
- TVI technology eliminates need for network infrastructure upgrades on existing systems
- TAA-compliant and NDAA-certified for government procurement and supply chain requirements
$511.80 $493.99 Save $17.81 -
Speco Technologies
SKU: D16VN10TB
Speco D16VN10TB 16-Channel 4K TVI DVR 10TB
16-channel 4K TVI DVR with 10TB storage, no IP network needed
- Records 16 channels simultaneously at 4K resolution (3840×2160) from analog TVI cameras
- 10TB internal HDD handles extended recording across all 16 channels without manual expansion
- TAA and NDAA compliant for government and critical infrastructure deployments
$2,508.70 $1,380.99 Save $1,127.71
Network Video Recorders (NVRs)
Network Video Recorders (NVRs) provide centralized recording and management for IP surveillance systems. Select an NVR based on camera count, resolution requirements, retention targets, and long-term storage scalability to ensure reliable commercial deployments.
Plan Your Deployment
- Camera count and resolution requirements
- Retention period and storage capacity planning
- Throughput and recording bandwidth limits
- RAID configuration and redundancy strategy
- Remote access and VMS integration needs
Network Video Recorders (NVRs) — Engineering-Grade Video Recording & Storage for Commercial Deployments
This category covers 988 working models of network video recorders (nvrs) sourced manufacturer-direct or through channel-direct US distribution. Build the rest of your system around the architectural choices below — compatibility, environmental rating, and lifecycle decisions made here propagate through every downstream component you specify.
What to Look For
Channel count and supported resolution define the recorder's ceiling. A 16-channel NVR rated for 8MP per channel is a different product from a 16-channel rated for 2MP — the latter throttles your future camera upgrades. Read the per-channel and aggregate bitrate ceilings (often expressed in Mbps incoming/outgoing). A safe rule: target an NVR with at least 50% headroom on bitrate, and channel count one step above current need.
Storage architecture matters as much as raw capacity. Surveillance-grade drives (WD Purple, Seagate SkyHawk) are tuned for 24/7 write loads and a small concurrent read count; desktop drives fail in months under the same workload. RAID levels affect both fault tolerance and write performance — RAID 5 for general retention with one drive of redundancy, RAID 6 or 10 for larger arrays where two-drive failure isn't recoverable in RAID 5.
VMS choice locks you into a vendor ecosystem more than any camera decision will. Genetec, Milestone, Hanwha Wisenet WAVE, Avigilon, and Axis Camera Station differ on per-camera licensing cost, third-party integrations (access control, video analytics, identity), and analyst workflow. Demo the operator interface with the people who will actually use it before committing — analyst frustration drives more replacements than technical limits.
Plan for off-site or redundant storage. Single-site recorders fail or get stolen. Cloud-archive licensing, NAS replication, and multi-site federation become important the moment a chain customer asks for centralized investigation tools. Recorders that bury cloud-archive in a per-camera SaaS bundle drive long-term costs much higher than a one-time NAS expansion.
Key Specs in This Category
| Spec | Available Options |
|---|---|
| Resolution | 20MP+, 8MP, 12MP, 2MP, 5MP, 4MP, 16MP, 6MP |
| IP Rating | IP66, IP67 |
| Connectivity | Wired, Wi-Fi |
| Power | PoE, PoE+, AC/DC, PoE++, Battery |
| Channels | 16, 32, 8, 64, 4, 12, 24, 28 |
| Storage | microSD, HDD |
Top Brands in This Category
Frequently Asked Questions
How many drives can fit in a typical NVR?
Compact desktop NVRs hold 1-2 drives — typically capping around 16TB usable. Mid-size rack-mount NVRs hold 4-8 drives, often 32-64TB usable in RAID 5/6. Enterprise NVRs and dedicated storage servers scale to 16+ drives with hot-swap and JBOD expansion. Match drive count to your retention math; running out of drive bays mid-project means a recorder replacement, not just a drive add.
Should I use surveillance-grade or enterprise drives?
Surveillance-grade drives (WD Purple, Seagate SkyHawk) are correct for most NVRs — they're tuned for many concurrent write streams from cameras with low read count. Enterprise drives (WD Gold, Seagate IronWolf Pro, Exos) are appropriate for high-channel-count systems with many concurrent investigator clients reading recorded video. Avoid desktop drives entirely; they're rated for 8x5 light duty and fail quickly in 24/7 NVR loads.
What's the difference between an NVR and a hybrid recorder?
An NVR records exclusively from IP cameras over Ethernet. A hybrid (or tribrid) recorder accepts both IP cameras and legacy analog/HD-over-coax cameras on dedicated BNC inputs, useful for migrations where you can't replace coax runs immediately. Hybrid units cost more per channel and add complexity; if you're starting fresh or fully replacing analog, a pure NVR is simpler and almost always cheaper per usable channel.
Can I expand storage on an existing NVR?
Most rack NVRs and storage servers accept storage expansion via empty drive bays, eSATA/SAS JBOD shelves, or iSCSI targets. Desktop NVRs with only 1-2 bays generally do not. Before buying, check the recorder's supported expansion architecture and the maximum raw and usable capacity — many sub-$2,000 NVRs cap below the 24TB threshold most projects need within three years.
Do I need a dedicated VMS workstation?
For a few cameras and one or two simultaneous operators, the NVR's built-in client interface is enough. For 32+ cameras, multiple investigator seats, video walls, or wall-of-monitors operations, a dedicated workstation (or thin client) running the VMS client is standard. The workstation needs adequate GPU decode capacity for the simultaneous stream count — H.265 decode acceleration is essential at scale.
Need help choosing? Talk to a Senior Specialist — direct line 877-277-7147 or request a quote.
Build a Complete System
Most network video recorders (nvrs) installations need these companion products to be fully functional. Add them to your cart for system-wide compatibility.













