Lifesafety Power · FPO250-B1002C82D8E4

Lifesafety Power FPO250-B1002C82D8E4 FPO250-B1002C82D8E4

250W distributed power supply designed to feed 16 independently fused loads from a single enclosure — the workhorse for access control panels

• 16 independently fused 3A outputs prevent a single fault from cascading across zones.
• Dual-voltage 12V/4A and 24V/8A outputs support mixed-device installations from one enclosure.
• E4 form factor fits standard electrical cabinets without consuming rack space.

Lifesafety Power · FPO250-B1002C82D8E4M

Lifesafety Power FPO250-B1002C82D8E4M Power supply board 250W

250W power supply board engineered for security integrators deploying distributed IP cameras and networked endpoints across warehouse, retail, or

• Selectable 12VDC/20A or 24VDC/10A output supports mixed-voltage camera deployments.
• 250W board-level form factor integrates into custom enclosures and distributed power architectures.
• Dual voltage flexibility lets integrators support both legacy analog and modern IP endpoints.

Lifesafety Power · FPO250-B1002C82D8E4M1

Lifesafety Power FPO250-B1002C82D8E4M1 250W power supply 20A/12V

250W industrial-duty power supply designed to centralize lock control and auxiliary power for medium- to large-scale access control deployments

• Drives 16 solenoid locks simultaneously at 20A/12V or 10A/24V primary output.
• Per-output failsafe/failsecure selection lets mag locks and strikes share one supply.
• 16 individually fused 3A auxiliary outputs isolate reader and sensor power from lock loads.

Lifesafety Power · FPO250-B1002C82D8E6M1

Lifesafety Power FPO250-B1002C82D8E6M1 250W power supply 20A/12V

250W power supply purpose-built for access control and door lock integration in mid-to-large facilities

• Delivers 20A/12V or 10A/24V primary output to drive high-inrush mag locks across multi-door deployments.
• 16 independently fused 3A relay outputs support per-door failsafe, fail-secure, or FAI mode selection.
• Adjustable 5–18V/4A secondary output powers legacy sensors and PIR detectors without added converters.

Lifesafety Power · FPO250-B1002C82D8E8M1

Lifesafety Power FPO250-B1002C82D8E8M1 Pwr supply brd 250W 20A/1

Dedicated 250W power supply board designed for distributed access-control installations, electric-strike systems, and door-lock clusters

• Field-selectable 20A@12V or 10A@24V output supports legacy and modern lock hardware.
• 16 individually fused 3A relay outputs drive locks directly, eliminating intermediate relay modules.
• 16 isolated 3A auxiliary DC outputs power sensors and REX devices without load crosstalk.

Lifesafety Power · FPO250-B1002C8D8E4M1

Lifesafety Power FPO250-B1002C8D8E4M1 250W power supply 20A/12V

250W power supply designed for access control and security infrastructure requiring isolated DC distribution across multiple circuits

• Dual-bus isolation prevents single-point failures across 8 fused 3A DC outputs per bus.
• Scales to 20A@12VDC or 10A@24VDC to match door hardware and camera load requirements.
• Eight relay outputs support FAI, failsafe, failsecure, and LABEL modes per circuit.

Lifesafety Power · FPO250-B1002C8P2D8PE4M

Lifesafety Power FPO250-B1002C8P2D8PE4M Power supply board 250W

250W power supply board designed for access control and life safety installations

• Selectable 12V/20A or 24V/10A primary output adapts to mixed lock hardware.
• 16 relay lock outputs plus 16 auxiliary DC outputs centralize multi-door power distribution.
• Compatible with Mercury/Lenel backplates for drop-in integration into existing enclosures.

Lifesafety Power · FPO250-B1002C8P2D8PE6M

Lifesafety Power FPO250-B1002C8P2D8PE6M 250W power supply 20A/12

250W industrial power supply engineered for access control and security system integration

• Delivers 20A@12VDC or 10A@24VDC to power diverse access control loads from one unit.
• Eight relay outputs (2.5A each) support fail-safe or fail-secure door strike/mag-lock control.
• Class 2 power-limited circuits on all outputs simplify code compliance for auxiliary wiring.

Lifesafety Power · FPO250-B1002D8E2

Lifesafety Power FPO250-B1002D8E2 150W PS 12A/12V or 6A/24V 8 rel

Dedicated access control power supply designed for integrated door lock and auxiliary device control in mid-scale deployments

• Selectable 12V/12A or 24V/6A output eliminates separate supplies in mixed-voltage deployments.
• Eight independently fused 3A relay outputs support failsafe or failsecure selection per circuit.
• Sixteen Class 2 auxiliary outputs at 2.5A each power RTE, DPS, and sensors without added modules.

Lifesafety Power · FPO250-B1002D8E4M1

Lifesafety Power FPO250-B1002D8E4M1 250W power supply 20A/12V

250W power distribution unit designed for access-control and surveillance installations where centralized 12VDC or 24VDC rails replace per-device

• Dual-voltage output (12V/20A or 24V/10A) eliminates stocking two separate PSUs.
• Eight independently fused 3A outputs isolate endpoint faults from the rest of the system.
• Per-output Bus1/Bus2 assignment supports fault-tolerant split-zone power architectures.

Lifesafety Power · FPO250-B100C4D8E2

Lifesafety Power FPO250-B100C4D8E2 Power Supply

Lifesafety Power redundant power supply designed to maintain uninterrupted operation across distributed IP security endpoints in mission-critical

• Battery backup (B100) sustains field devices through AC mains failure without interruption.
• Redundant architecture protects surveillance, access control, and network endpoints continuously.
• Rack-mountable form factor suits server rooms and remote monitoring station deployments.

Lifesafety Power · FPO250-B100C8D8E2

Lifesafety Power FPO250-B100C8D8E2 FPO250-B100C8D8E2

250W industrial power supply enclosure designed to distribute fused DC power across multiple surveillance, access control, and auxiliary devices

• Eight independently fused 3A outputs prevent a single fault from cascading across the system.
• Supplies 12V/4A and 24V/8A from one chassis, covering cameras, locks, and readers together.
• Front-accessible fuses on a 35mm DIN rail allow fast replacement without rewiring.

Lifesafety Power · FPO250-B100C8D8E4

Lifesafety Power FPO250-B100C8D8E4 Power supply board 250W 20A/12

250W secondary power supply board designed to distribute power across multi-door access control and security integrations

• Selectable 12VDC@20A or 24VDC@10A primary output matches lock voltage without extra supply lines.
• 16 independently fused 3A outputs (8 relay + 8 aux DC) isolate faults and prevent cascade failures.
• Adjustable 5–18VDC secondary at 4A powers sensors and keypads, eliminating extra transformers in cabinet.

Lifesafety Power · FPO250-B100C8D8E4M

Lifesafety Power FPO250-B100C8D8E4M Power supply board 250W 20A

250W enclosed power supply module engineered for distributed access control, electric lock circuits, and auxiliary sensor loads in enterprise and

• Dual-voltage output (4A@12V or 8A@24V) eliminates separate supplies in mixed-voltage installs.
• 16 individually fused outputs (8 lock + 8 auxiliary) isolate faults to a single circuit.
• 250W enclosed module supports distributed access control, electric locks, and sensor loads.

Lifesafety Power · FPO250-B100C8D8E6M

Lifesafety Power FPO250-B100C8D8E6M Mercury Uni Pw Sys 250W/120VA

Unified access control power supply designed for multi-door facilities requiring centralized power distribution, battery backup, and integrated

• 250W dual-voltage (12V/24V) output supports legacy and modern lock hardware in one cabinet.
• 8 relay lock outputs and 8 aux outputs, each 3A fused, cover multi-door deployments centrally.
• UL-listed fire alarm interface auto-unlocks designated zones on alarm—no custom override needed.

Lifesafety Power · FPO250-B100C8D8E6M1

Lifesafety Power FPO250-B100C8D8E6M1 Mercury Unified Power System

Unified power distribution platform designed for integrated access control, emergency lighting, and auxiliary load management in mid-scale security

• 250W, 120V AC input powers up to 16 simultaneous loads from a single chassis.
• 8 relay outputs (3A fused, failsafe/failsecure per zone) control mag locks and strikes.
• Adjustable 5–18VDC per zone eliminates separate PSUs and reduces installation overhead.

Lifesafety Power · FPO250-B100C8D8PE2

Lifesafety Power FPO250-B100C8D8PE2 250W power supply 20A/12V

250W dedicated power supply designed for distributed access control and door lock management in mid-scale security installations

• Delivers 20A at 12VDC or 10A at 24VDC, eliminating voltage sag across multiple locks.
• Eight independent 3A fused relay outputs support per-door failsafe or failsecure selection.
• Eight 2.5A Class 2 aux outputs segment across Bus1/Bus2 for isolated reader circuit zoning.

Lifesafety Power · FPO250-B100C8D8PE6M

Lifesafety Power FPO250-B100C8D8PE6M 250W PS 20A/12V or 10A/24V 1

250W power supply engineered for multi-output access control and facility security applications

• Selectable 20A/12V or 10A/24V primary output supports mixed-voltage door hardware.
• Eight individually fused relay outputs with FAI, failsafe, or failsecure mode per output.
• Eight Class 2 aux DC outputs at 2.5A each, assignable to dual buses for isolated control.

Lifesafety Power · FPO250-B100C8PD8PE4M

Lifesafety Power FPO250-B100C8PD8PE4M Mercury Unified Power Sys

250W unified power distribution platform designed for multi-door access control deployments that require integrated battery backup, fire alarm

• 250W dual-voltage DC distribution eliminates separate power supplies for mixed-voltage lock installs.
• 8 relay lock outputs and 8 aux outputs centralize multi-door access power in one UL-listed enclosure.
• Integrated fire alarm disconnect auto-unlocks doors on alarm signal—no external relay required.

Lifesafety Power · FPO250-B100C8PD8PE4M1

Lifesafety Power FPO250-B100C8PD8PE4M1 FPO250-B100C8PD8PE4M1

250W power distribution supply designed for mid-to-large access control installations, card readers, and door-lock arrays

• 250W primary output selectable 20A@12V or 10A@24V supports large lock arrays.
• 8 relay outputs + 8 aux DC outputs isolate lock circuits from reader/sensor runs.
• Adjustable 5–18V@4A secondary supply eliminates separate regulators for mixed-voltage devices.

Lifesafety Power · FPO250-B100D8E2

Lifesafety Power FPO250-B100D8E2 Std Pow Sys 250W Dual Voltage

UL-listed backup power system designed for distributed access control, door locks, intercoms, and life-safety equipment in mid-to-large deployments

• Dual 12V/24V outputs on a single 250W system eliminate separate power shelves in mixed-load installs.
• 8 individually fused 3A outputs, each selectable per voltage zone, support up to 8 discrete devices.
• Integrated fire alarm disconnect auto-unlocks doors on alarm signal, satisfying ADA/IBC code requirements.

Lifesafety Power · FPO250-B100D8PM8PNLCE4A

Lifesafety Power FPO250-B100D8PM8PNLCE4A 250W power supply 20A/1

250W power supply engineered for mid-scale IP security deployments where independent output supervision and per-channel current limiting are required

• Eight Class 2 outputs, each current-limited to 2.5A, stop short-circuit faults from cascading.
• Select 12VDC/20A or 24VDC/10A at install time to match camera or access control voltage needs.
• Bus1/Bus2 per-output assignment enables isolated power branches and supervised redundancy schemes.

Lifesafety Power · FPO250-B100D8PM8PNLCE4M

Lifesafety Power FPO250-B100D8PM8PNLCE4M 250W power supply 20A/1

250W power supply designed to deliver controlled 12VDC at 20A or 24VDC at 10A to distributed security endpoints and accessory modules in integrated

• Delivers 250W with 20A @ 12VDC or 10A @ 24VDC to support core surveillance loads.
• Eight Class 2 power-limited 2.5A auxiliary outputs provide individual circuit isolation per channel.
• Per-output Bus1/Bus2 assignment enables zone segmentation to reduce single-point failure risk.

Lifesafety Power · FPO250-B150C8D8PE4M

Lifesafety Power FPO250-B150C8D8PE4M 250W power supply 20A/12V

250W power supply engineered for mid-scale access control and electric lock installations

• Dual-voltage output (12VDC/20A or 24VDC/10A) supports mixed-voltage deployments on one unit.
• Eight individually fused 3A relay outputs support per-output failsafe, failsecure, or FAI logic.
• Eight 2.5A class 2 auxiliary outputs assign to Bus1 or Bus2 for supervised auxiliary load monitoring.

Lifesafety Power · FPO250-B150C8D8PE6M

Lifesafety Power FPO250-B150C8D8PE6M 250W power supply 20A/12V

250W power supply designed to manage distributed lock control and auxiliary circuits in access control and security integration environments

• 8 individually fused 3A relay outputs support fail-safe, fail-secure, or FAI per channel.
• Delivers 12VDC/20A or 24VDC/10A within a shared 250W budget—select voltage before design.
• 8 auxiliary 2.5A Class 2 outputs are bus-selectable for split supervision circuit control.

Lifesafety Power · FPO250-B150M8NLC2SD4PE6M1/T8-A

Lifesafety Power FPO250-B150M8NLC2SD4PE6M1/T8-A 250W power supply

250W managed power distribution unit designed to feed multi-camera surveillance systems and access-control networks from a single backbone supply

• 250W capacity supports 12V/20A or 24V/10A to feed multi-camera deployments.
• Eight independently fused 3A outputs isolate faults so one short won't drop other ports.
• E6 enclosure (30×23×6.5 in) fits 19-inch racks or wall-mounts beside your NVR.

Lifesafety Power · FPO250-B150M8NLCSD16E6M/P8-A

Lifesafety Power FPO250-B150M8NLCSD16E6M/P8-A 250W power supply

• 8 individually fused 3A outputs distribute 250W across cameras and edge devices.
• Selectable 12VDC/20A or 24VDC/10A output adapts to mixed-voltage device deployments.
• Remote fault and load monitoring lets you detect device failures before coverage drops.

Lifesafety Power · FPO250-BOXED

Lifesafety Power FPO250-BOXED Smart DC Power Supply/Charger

DC power supply and intelligent charger designed to support distributed security endpoints across access control, cameras, and auxiliary equipment

• Supports 12V/24V distributed endpoints where centralized PoE switching is not viable.
• Smart charger function maintains regulated DC output during line loss for continuous uptime.
• Factory-boxed form factor ships ready to mount on wall or in cabinet enclosures.

Lifesafety Power · FPO250-C4PC8P2D8PE6M1

Lifesafety Power FPO250-C4PC8P2D8PE6M1 Mercury Unified Pow Sys Fl

UL-listed unified power supply and access control hub designed for mid-scale door control and auxiliary device installations

• Delivers 250W with 4 relay lock outputs and 8 aux circuits in one enclosure.
• Per-zone 12V/24V selection extends electrolock coil life and reader compatibility.
• Monitored fire alarm input auto-unlocks fail-safe doors with no external relay panel.

Lifesafety Power · FPO250-C82D8E4M1

Lifesafety Power FPO250-C82D8E4M1 250W power supply 20A/12V or 1

250W power supply designed for access-control and door-lock systems

• Dual main buses (12V/20A or 24V/10A) power mixed lock and device loads from one unit.
• 8 relay outputs, each fused at 3A, support failsafe, failsecure, or FAI per output.
• 8 auxiliary DC outputs selectable per bus simplify distributed multi-controller wiring.

Lifesafety Power · FPO250-C8D8E1

Lifesafety Power FPO250-C8D8E1 Unified Power Sys FPO250-C8D8E1

Compact unified power supply designed for access control and life-safety systems requiring integrated battery backup, relay management, and

• 250W output supports 8–16 door strikes, readers, and auxiliary loads from 120V AC.
• 8 relay lock outputs (3A fused, failsafe/failsecure) eliminate external relay panels on most sites.
• Integrated fire alarm disconnect auto-unlocks doors on FAI contact closure for life-safety compliance.

Lifesafety Power · FPO250-C8D8E2

Lifesafety Power FPO250-C8D8E2 8 lock 8 auxiliary outputs fused

250W fused power distribution enclosure designed to supply door locks, auxiliary devices, and access-control loads in integrated security systems

• 16 independently fused 3A outputs (8 lock + 8 auxiliary) prevent fault cascades.
• Supports 12VDC/20A or 24VDC/10A input, adapting to existing power source voltage.
• Single enclosure consolidates EM lock and auxiliary load power; no external breaker needed.

Lifesafety Power · FPO250-C8D8E4M

Lifesafety Power FPO250-C8D8E4M Power supply board 250W 20A/12V

250W switching power supply board designed for centralized power distribution in security control cabinets and access control installations

• Delivers 20A @ 12VDC or 10A @ 24VDC from one board, eliminating separate regulators.
• Eight Form-C relay outputs enable circuit supervision and failover to reduce false alarms.
• 250W capacity fits standard 15A–20A breakers, simplifying crowded panel installations.

Lifesafety Power · FPO250-C8E1

Lifesafety Power FPO250-C8E1 8 lock outputs fused at 3A per outpu

250W, eight-output fused power supply designed for access control systems, electric locks, door strikes, and magnetic locks in commercial security

• Eight independent 3A fused outputs prevent a single lock fault from dropping other doors.
• 250W supply runs up to 20A at 12V or 10A at 24V to cover multi-door installations.
• Supports maglocks, door strikes, ELR devices, and readers from one protected chassis.

Lifesafety Power · FPO250-C8PD8E2

Lifesafety Power FPO250-C8PD8E2 PSB 250W 20A/12V or10A/24V 8 rel

250W enclosed power supply board engineered for distributed access control architectures spanning multiple door zones, electromagnetic locks, and

• Selectable 12V/20A or 24V/10A output eliminates zone-level buck converters.
• 8 Class 2 relay outputs at 2.5A each drive EM locks and strikes independently.
• 8 auxiliary fused outputs at 3A each isolate readers and sensors from lock circuits.

Lifesafety Power · FPO250-C8PE1

Lifesafety Power FPO250-C8PE1 8 Door Lock Power 12v@20a Or 24v@10

Compact 250W power distribution unit designed to supply and control eight independent door locks in distributed access control installations

• Supplies 8 independent class 2 / 2.5A outputs, eliminating per-door power modules.
• Selectable 12VDC @ 20A or 24VDC @ 10A supports both legacy and modern lock actuators.
• E1-rated metal cabinet provides EMI shielding for continuous-duty commercial installation.