Lifesafety Power

Lifesafety Power · FPO150-B100C8D8PE4

Lifesafety Power FPO150-B100C8D8PE4 150W 12A/12V or 6A/24V

150W centralized power supply designed for access control, door locks, and life safety equipment in small-to-medium installations

• Switchable 12A/12V or 6A/24V output eliminates separate supplies in mixed-voltage deployments.
• Eight 3A fused relay outputs support failsafe or failsecure logic per door without external relays.
• Eight Class 2 aux outputs at 2.5A each independently power readers, REX, and alarm circuits.

Lifesafety Power · FPO150-B100C8D8E6A/P8-A

Lifesafety Power FPO150-B100C8D8E6A/P8-A 8DR

150W PreWired power supply purpose-built for AMAG 8DR access control systems

• 150W output delivers 4A at 12V and 4A at 24V for up to 8 electric locks.
• Factory-terminated 8DBC Panduit harnesses eliminate field splicing on AMAG 8DR installs.
• Independent 12V and 24V circuits support simultaneous door-lock and auxiliary relay loads.

Lifesafety Power · FPO150-B100C8D8E4A/P8-A

Lifesafety Power FPO150-B100C8D8E4A/P8-A 8DR E4A 150W 4A/12V

150W regulated power supply designed to distribute power across dual voltage rails in access control and security integration deployments

• 150W dual-rail supply delivers 4A at both 12VDC and 24VDC from one enclosure.
• 8 lock outputs and 8 auxiliary outputs support strikes, maglocks, and relays on one panel.
• Factory-wired 8DBC connectors with Panduit termination eliminate manual splicing on install.

Lifesafety Power · FPO150-B100C8D8E2M

Lifesafety Power FPO150-B100C8D8E2M 150W

150W board-level power supply engineered for distributed power architecture in mid-scale security and access control installations

• Delivers 12VDC @ 12A or 24VDC @ 6A to match legacy and modern endpoint requirements.
• Board-only form factor integrates directly into custom chassis or existing backplane infrastructure.
• 150W capacity supports mid-scale camera and access control arrays without a centralized supply.

Lifesafety Power · FPO150-B100C8D8E4A/T8-C

Lifesafety Power FPO150-B100C8D8E4A/T8-C 8DR Enclosure

Pre-wired 24"×20"×4.5" wall-mount enclosure designed for access control, alarm, and security system integration

• Pre-wired 8-relay enclosure eliminates field assembly and reduces wiring errors at install.
• Factory-installed 12V and 24V supplies support door strikes, mag locks, and siren circuits.
• 24×20×4.5-inch wall-mount chassis consolidates power and relay control in a single hub.

Lifesafety Power · FPO150-B100C82D8PE4M

Lifesafety Power FPO150-B100C82D8PE4M 8DR DV E6V 150W 4A/12V

150W industrial power distribution supply designed to feed multiple security and access control devices from a single AC source

• 150W capacity powers multiple locks, cameras, and strobes from one enclosure.
• Dual 12V/24V rails at 4A each eliminate the need for separate voltage supplies.
• 8 supervised relay outputs detect and report cut or tampered wiring instantly.

Lifesafety Power · FPO150-B100C82D8PE4M/T8-C

Lifesafety Power FPO150-B100C82D8PE4M/T8-C 8DR

150W prewired access control power supply engineered for small-to-medium commercial deployments requiring distributed 12V and 24V power to door locks

• Delivers 4A at 12V and 4A at 24V simultaneously to power up to 8 door locks.
• Factory-prewired MR52 harnesses eliminate field termination and reduce install errors.
• 16 auxiliary outputs support relays, REX buttons, LEDs, and door sensors.

Lifesafety Power · FPO150-B100C82D8PE4M1/P8-B

Lifesafety Power FPO150-B100C82D8PE4M1/P8-B 150W power supply

150W integrated power supply and access control platform designed to consolidate door control, auxiliary power distribution, and battery supervision

• Dual 12VDC/24VDC bus runs mixed lock and reader types from one UL-listed cabinet.
• 8 fused 3A relay outputs plus 16 aux outputs cover doors and sensors without add-on hardware.
• Form C fault contacts report AC loss, blown fuses, and battery faults for clean FACP integration.

Lifesafety Power · FPO150-B100C82D8PE6M/T8-C

Lifesafety Power FPO150-B100C82D8PE6M/T8-C ProWire Power

Dual-voltage access control power supply engineered to integrate FlexPower modules, door locks, readers, and fire alarm signaling into a single

• 150W total output supports 8–16 door deployments across 16 auxiliary and 8 relay outputs.
• Dual 12V/24V buses eliminate separate supplies for mixed-voltage lock and reader installations.
• Built-in Form C fire alarm disconnect triggers automatic door unlock without external relays.

Lifesafety Power · FPO150-B100C82D8E4M/T8-A

Lifesafety Power FPO150-B100C82D8E4M/T8-A 150W 12A

150W primary power module designed for distributed access control and security infrastructure

• Dual primary outputs deliver 12A@12V or 6A@24V from a single 150W module.
• 8 relay outputs support mixed FAI/failsafe/failsecure modes in one enclosure.
• 16 aux DC outputs, each 3A-fused, assign independently to Bus1 or Bus2.

Lifesafety Power · FPO150-B100C82D8PE4M1/T8-A

Lifesafety Power FPO150-B100C82D8PE4M1/T8-A 150W 4A/12V

150W distributed power supply rated 4A at both 12V and 24V outputs—built for access control, surveillance, and door management deployments where you

• Eight isolated 12V/24V rails prevent a single-device fault from collapsing system power.
• 150W envelope supports mixed mag locks, readers, and aux relays at 4A per rail.
• Ships pre-wired with tie-wrap harness, reducing bench time and installation wiring errors.

Lifesafety Power · FPO150-B100C82D8PE4M1/T8-C

Lifesafety Power FPO150-B100C82D8PE4M1/T8-C 150W 4A/12V

150W distributed power supply purpose-built for multi-door access control installations

• 150W supply delivers 4A at 12V, powering up to 8 simultaneous lock solenoids.
• Factory pre-wired 8-door relay outputs reduce installation time in multi-door deployments.
• Switchable 12V/24V output supports both fail-safe and fail-secure lock circuit types.

Lifesafety Power · FPO150-B100C82D8PE4M1

Lifesafety Power FPO150-B100C82D8PE4M1 150W

150W dual voltage power supply purpose-built for access control and surveillance systems where multiple locks, door strikes, and auxiliary devices

• Eight dedicated 12V relay outputs give each lock circuit independent supervision.
• 16 auxiliary outputs support readers, strobes, and sensors without power-sharing conflicts.
• 150W at 120V AC input scales to mid-size 4–8 door deployments on a single 15A circuit.

Lifesafety Power · FPO150-B100C82D8PE6H/T8-C

Lifesafety Power FPO150-B100C82D8PE6H/T8-C 150W 12A

• Delivers 12A at 12VDC or 6A at 24VDC to power multiple locks and readers.
• Eight relay outputs (3A each) offer per-channel failsafe or failsecure selection.
• Eight Class 2 auxiliary outputs (2.5A each) assign to Bus1 or Bus2 independently.

Lifesafety Power · FPO150-B100C82D8PE4H1/P8-D

Lifesafety Power FPO150-B100C82D8PE4H1/P8-D 150W power supply

150W power supply designed for access control and security infrastructure requiring selectable 12V/12A or 24V/6A output

• 8 relay lock outputs, each fused at 3A, support failsafe, failsecure, or FAI modes.
• 8 class 2 auxiliary DC outputs at 2.5A each enable safe, code-compliant device power.
• Dual-bus architecture lets each auxiliary output select Bus1 or Bus2 independently.

Lifesafety Power · FPO150-B100C82D8PE4H1/P8-C

Lifesafety Power FPO150-B100C82D8PE4H1/P8-C 150W power supply

Hardened power supply designed for access control and security infrastructure deployments

• Dual-voltage output (12VDC/12A or 24VDC/6A) supports legacy and modern lock hardware.
• 8 relay lock outputs, each fused at 3A with per-output failsafe/failsecure selection.
• 8 Class 2 auxiliary DC outputs with Bus1/Bus2 supervision paths reduce single-point failure risk.

Lifesafety Power · FPO150-B100C82D8PE8H/P8-C

Lifesafety Power FPO150-B100C82D8PE8H/P8-C 150W 12A

150W power supply rated at 12A output, delivering selectable 12V or 24V primary voltage with adjustable 5–18V secondary output at up to 4A

• Delivers 150W at 12A/12V or 6A/24V to power multi-door access control systems.
• 8 Class 2 relay outputs fused at 3A each support failsafe or failsecure door mode.
• 16 DC aux outputs at 2.5A routable across dual Bus1/Bus2 channels for zone flexibility.

Lifesafety Power · FPO150-B100C82D8PE4M/P8-A

Lifesafety Power FPO150-B100C82D8PE4M/P8-A 150W 12A

150W industrial power supply engineered for security control infrastructure

• Dual-voltage output (12VDC/12A or 24VDC/6A) powers mixed endpoint devices from one chassis.
• Eight 3A relay outputs support per-door failsafe, failsecure, or FAI logic for life-safety integration.
• Sixteen Class 2 DC aux outputs with Bus1/Bus2 segregation simplify multi-zone circuit supervision.

Lifesafety Power · FPO150-B100C82D8PE4M/P8-B

Lifesafety Power FPO150-B100C82D8PE4M/P8-B 150W 12A/12V

150W distributed power supply designed for access control, door strike, and auxiliary device management in commercial security installations

• Dual-voltage output (12A/12V or 6A/24V) selectable without hardware modification.
• 8 relay lock channels, each fused at 3A with per-channel failsafe/failsecure selection.
• 24 independently supervised DC outputs isolate faults across doors, strikes, and sensors.

Lifesafety Power · FPO150-B100C82D8PE4M/P8-C

Lifesafety Power FPO150-B100C82D8PE4M/P8-C 150W 12A

150W power supply engineered for access control and security system installations

• Delivers 12A @ 12VDC or 6A @ 24VDC to power multiple locks and control devices.
• 8 relay lock outputs are individually configurable for failsafe, failsecure, or FAI.
• 16 auxiliary outputs split across two buses simplify multi-zone load segregation.