Lifesafety Power products
-
Lifesafety Power
SKU: RGM150B-M8PNZ/T4-A
Lifesafety Power RGM150B-M8PNZ/T4-A Gemini Rack Mount Power Sys
- Eight individually selectable 12V/24VDC Class 2 outputs eliminate separate supplies for mixed lock/reader installs.
- Integrated fire alarm disconnect automatically de-energizes locks on alarm signal to meet life-safety code.
- UL-listed 3RU chassis with AC fault and system fault Form C contacts enables direct tie-in to monitoring panels.
$2,727.00 $1,961.99 Save $765.01The item has been added -
Lifesafety Power
SKU: RGL250/250/H-2M8PNLCZ1-FB03/E
Lifesafety Power RGL250/250/H-2M8PNLCZ1-FB03/E Rackmount 150W pow
- Selectable 12VDC/12A or 24VDC/6A output eliminates duplicate inventory across door hardware specs.
- 8-port managed distribution with 2.5A Class 2 per port removes need for external fuses or breakers.
- 150W total capacity supports 8–16 access-control readers or mixed strike/intercom loads without voltage sag.
$3,386.00 $2,223.99 Save $1,162.01The item has been added -
Lifesafety Power
SKU: RGH75B-C8PZ/T4-D
Lifesafety Power RGH75B-C8PZ/T4-D 75W power supply 6A/12V or 3A
- Dual voltage output (12VDC/6A or 24VDC/3A) matches lock coil and wiring requirements.
- Eight individually supervised Class 2 relay outputs eliminate external fuses per channel.
- Per-output failsafe/failsecure selection supports egress and life-safety code compliance.
-
Lifesafety Power
SKU: RGH75B-C8PZ/T4-C
Lifesafety Power RGH75B-C8PZ/T4-C 75W power supply 6A/12V or 3A
- Selectable 12VDC/6A or 24VDC/3A output supports mixed-voltage lock hardware from one unit.
- Eight independently configurable relay outputs at 2.5A each control up to 8 locks simultaneously.
- Per-channel failsafe, failsecure, or FAI logic simplifies fire alarm integration and egress compliance.
$2,259.00 $1,483.99 Save $775.01The item has been added -
Lifesafety Power
SKU: RGH75B-C8PZ
Lifesafety Power RGH75B-C8PZ 75W power supply 6A/12V or 3A/24V 8
- Delivers 6A/12VDC or 3A/24VDC from a single 75W supply for flexible lock voltage.
- Eight independently configurable Class 2 relay outputs rated 2.5A each simplify wiring.
- Failsafe or failsecure mode set per channel; external battery input supports backup power.
$1,681.00 $1,104.99 Save $576.01The item has been added -
Lifesafety Power
SKU: RGA-XZ1-BOXED
Lifesafety Power RGA-XZ1-BOXED Boxed Power Systems 120 VAC 50/60
- Accepts 120VAC 50/60Hz mains input for standard North American cabinet installs.
- Boxed enclosure centralizes power distribution, reducing cable clutter in rack deployments.
- Single enclosure manages multiple downstream devices for surveillance and access control.
$1,450.00 $952.99 Save $497.01The item has been added -
Lifesafety Power
SKU: RGA-D8PM8NZ1
Lifesafety Power RGA-D8PM8NZ1 Custom Life Safety Unit
- Custom life safety power distribution module
- Configured for security and life safety system integration
- Hardware module for specialized deployment environments
-
Lifesafety Power
SKU: RGA75-C8Z
Lifesafety Power RGA75-C8Z RGA75-C8Z
- 75W redundant output sustains access control and security loads without interruption.
- Dual independent 120 VAC inputs auto-switch to eliminate single points of mains failure.
- Integrated battery supervision enables remote monitoring of backup battery health and charge.
$1,442.00 $947.99 Save $494.01The item has been added -
Lifesafety Power
SKU: RGA75B-M8NZ
Lifesafety Power RGA75B-M8NZ Gemini Rack Mount Power Sys RGA75B-M
- Eight 3A fused outputs with per-channel voltage/current monitoring cut fault-diagnosis truck rolls.
- Selectable 12V/24V per zone and 75W capacity power mixed lock types from a single 3.5U chassis.
- UL-listed Form C fire alarm contacts automatically unlock doors, satisfying life-safety code requirements.
-
Lifesafety Power
SKU: RGA75B-C8Z
Lifesafety Power RGA75B-C8Z 75W power supply 6A/12V or 3A/24V 8
- Delivers 75W at 12V/6A or 24V/3A to support mixed-voltage access control loads.
- Eight independently fused 3A relay outputs allow per-channel failsafe or failsecure logic.
- Single-unit backbone eliminates separate stepping converters for 12V readers and 24V locks.
$1,502.00 $986.99 Save $515.01The item has been added -
Lifesafety Power
SKU: RGA75B-C8D8Z
Lifesafety Power RGA75B-C8D8Z Gemini Rack Mount Power Sys RGA75B
- 16 fused 3A outputs (8 relay lock + 8 aux) support mixed 12V/24V lock types per zone.
- UL-listed 3U rack enclosure consolidates dual-voltage power and battery backup in 75W.
- AC/system fault supervision triggers on blown fuse, ground fault, or power supply failure.
$1,540.00 $1,011.99 Save $528.01The item has been added -
Lifesafety Power
SKU: RD75-8
Lifesafety Power RD75-8 Rack Mount DC 12V@6A or 24V@3Aw/8 egress
- Rack-mount form factor fits standard 19-inch infrastructure without adapters.
- Eight dedicated egress outputs eliminate external relay banks for multi-lock runs.
- Dual-voltage design (12VDC/6A or 24VDC/3A) matches common lock hardware specs.
$641.00 $421.99 Save $219.01The item has been added -
Lifesafety Power
SKU: RD250-8
Lifesafety Power RD250-8 rack mount DC 12V at 20A or 24V at 10A
- Selectable 12VDC/20A or 24VDC/10A output matches your lock voltage topology exactly.
- Eight dedicated egress lock outputs eliminate separate relay modules in multi-door deployments.
- Rackmount form factor centralizes power distribution, reducing point-load failures across the rack.
$806.00 $529.99 Save $276.01The item has been added -
Lifesafety Power
SKU: RD250-16
Lifesafety Power RD250-16 Rackmount 250W power supply 20A/12V
- 16 individually fused outputs isolate faults, preventing one short from killing adjacent zones.
- Selectable 12VDC/20A or 24VDC/10A rails eliminate external regulators in mixed-voltage deployments.
- 2U rackmount form factor with dual 8-zone front boards simplifies cable routing in dense racks.
$864.00 $567.99 Save $296.01The item has been added -
Lifesafety Power
SKU: RD250/250
Lifesafety Power RD250/250 Rackmount 250W power supply 20A/12V
- Delivers 250W across 16 outputs at 12VDC/20A or 24VDC/10A from a single 2U chassis.
- Built-in FAI supervision and battery connections enable centralized fault monitoring and backup.
- Fits standard 19-inch racks at 2U, consolidating mixed-voltage endpoints without extra panels.
$1,152.00 $756.99 Save $395.01The item has been added -
Lifesafety Power
SKU: RD250
Lifesafety Power RD250 Rack mount system
- Mounts Lifesafety Power hardware in standard 19-inch rack enclosures.
- Consolidates power distribution and backup units into a single rack footprint.
- Simplifies installation in control rooms, server closets, and security racks.
$779.00 $511.99 Save $267.01The item has been added -
Lifesafety Power
SKU: RD150-8
Lifesafety Power RD150-8 rack mount DC 12V@12A or 24V@6A with 8
- Dual-voltage output (12V @ 12A or 24V @ 6A) supports mixed-voltage device deployments.
- Eight independent outputs eliminate daisy-chaining across door locks, readers, and control modules.
- 1RU form factor mounts in any standard 19-inch rack for centralized access control power distribution.
$763.00 $501.99 Save $261.01The item has been added -
Lifesafety Power
SKU: RD150-16
Lifesafety Power RD150-16 rack mount DC 12V@12A or 24V@6A with 16
- 16 discrete 12V or 24V outputs eliminate daisy-chaining in multi-door deployments.
- 1U rackmount form factor consolidates egress lock power within a standard cabinet.
- Fixed 150W capacity delivers 12A at 12VDC or 6A at 24VDC to match lock voltage needs.
$799.00 $524.99 Save $274.01The item has been added -
Lifesafety Power
SKU: RC150-C16
Lifesafety Power RC150-C16 rack mount DC lock control 12V@12A Or2
- 16 independently supervised outputs isolate faults without disrupting other lock circuits.
- Dual-voltage operation: 12VDC @ 12A or 24VDC @ 6A suits mixed door hardware installs.
- 19-inch rack-mount form factor centralizes lock power across multi-door enterprise deployments.
$909.00 $597.99 Save $311.01The item has been added -
Add to Cart The item has been addedLifesafety Power
SKU: HINGE-STANDOFF-KIT
Lifesafety Power HINGE-STANDOFF-KIT Hinging Standoff Kit
- Includes 4 hinging and 4 fixed standoffs, covering both adjustable and fixed mounts.
- All hardware is sized for 6-32 fasteners, matching common camera housings and brackets.
- Mixed standoff set reduces separate hardware orders during commissioning or servicing.
$33.00 $32.99 Save $0.01The item has been added