i-PRO · TRTN-CL5-IPS

i-PRO Ensure 5 Years OF Secure Access TO Triton - TRTN-CL5-IPS

• Five-year entitlement eliminates annual renewal cycles and locks in cloud pricing.
• Chain-of-custody audit logging supports prosecutor handoff and inter-agency sharing.
• Geo-redundant cloud storage removes on-premise NAS capacity planning from IT scope.

i-PRO · WVCF624

i-PRO Fixed Analog Dome Camera Super Dynamic 6 With - WVCF624

• Super Dynamic 6 handles mixed-lighting scenes, reducing blooming and shadow loss.
• Fits existing coaxial infrastructure—no network cabling or IP conversion required.
• Ceiling or wall mount options support flexible placement in corridors and retail spaces.

i-PRO · VITRAN-BAS-INSTL

I-Pro For School Bus Car Or Single Cabin - Vitran-Bas-Instl

• Covers mounting, wiring, and configuration for school bus or single-cabin deployments.
• Handles 12V/24V power integration with proper fusing for mobile electrical systems.
• Includes GPS, event trigger setup, and ignition-cycle verification for ViTRAN systems.

i-PRO · VITRAN-EXTCAM-INSTL

I-Pro For School Bus Car Or Single Cabin - Vitran-Extcam-Instl

• Vibration-rated mount prevents camera drift and optical misalignment over fleet lifecycle.
• IP67-rated sealed connectors block road spray, salt, and moisture from degrading signal.
• Corrosion-resistant fasteners and pre-routed conduit cut per-vehicle install time under one hour.

i-PRO · VITRAN-INTCAM-INSTL

I-Pro For School Bus Car Or Single Cabin - Vitran-Intcam-Instl

• Pre-wired, pre-tested assembly cuts field commissioning labor by 40–60%.
• Sealed connectors resist moisture ingress from condensation and humidity cycles.
• Native i-PRO VMS integration requires no protocol bridging or harness mods.

i-PRO · MC-75-B100C-1

I-Pro FPO75-B100C4D8PE2M/T4-A ; 1 X FPO75 75W - Mc-75-B100C-1

• 75W regulated DC output supports 4–8 mid-power IP cameras on a single supply.
• Parallel failover architecture enables N+1 redundancy so one failure won't drop video.
• 35mm DIN-rail mount fits standard outdoor enclosures with no proprietary hardware.

i-PRO · MC-75-B100D-1

i-PRO FPO75-B100D8PE2M; 1 X FPO75 75W Total - MC-75-B100D-1

• Delivers 75W at 60V DC, powering high-draw PTZ, thermal, and AI-edge cameras.
• Midspan or endpoint install fits both retrofit switch-side and new-build deployments.
• Stable 60V DC over 100 m of standard twisted-pair eliminates auxiliary power runs.

i-PRO · MC-75-B100M-2

i-PRO FPO75-B100M8NL4E4M ; 1 X FPO75 75W Total - MC-75-B100M-2

• 75W total power output supports PoE-driven camera deployments without external injectors.
• i-PRO factory-new unit ships from US distribution with manufacturer warranty intact.
• Fits standardized i-PRO BOMs for repeatable commissioning across single- or multi-site rollouts.

i-PRO · MC-75-B100M-3

i-PRO FPO75-B100M8NL4E4M ; 1 X FPO75 75W Total - MC-75-B100M-3

• 75W steady-state output powers 8–12 standard 1080p IP cameras from one supply.
• Centralized distribution eliminates per-device PoE injectors, simplifying isolation.
• 120 VAC input integrates directly with i-PRO cameras without additional converters.

i-PRO · MC-75-D8PE2M-1

i-PRO FPO75-D8PE2M ; 1 X FPO75 75W Total Output - MC-75-D8PE2M-1

• 75W total PoE budget supports 4–6 mid-range IP cameras from a single injector.
• 802.3af/at/bt compatibility works with i-PRO, Axis, Hikvision, Dahua, and ONVIF devices.
• Passive midspan architecture retrofits non-PoE copper runs without switch replacement.

i-PRO · MC-75-D8PE4M-1

i-PRO FPO75-D8PE4M ; 1 X FPO75 75W Total Output - MC-75-D8PE4M-1

• 75 W output right-sizes power for small door counts without over-provisioning.
• Selectable 12/24 VDC output with individually fused channels protects each device.
• Battery-charging circuit and AC-fail output support monitored, backed-up operation.

i-PRO · PQKV10062Z

i-PRO Front Cover - PQKV10062Z

• Genuine OEM part restores original IP rating and weatherproof seal integrity.
• Exact factory tolerances ensure proper gasket compression and lens alignment.
• Powder-coated stamped steel/aluminum construction provides UV-resistant durability.

i-PRO · TGS-3DP

i-PRO G-force Sensor FOR Arbitrator Vehicle - TGS-3DP

• Three-axis accelerometer tags footage with impact, braking, and turn data for forensic review.
• Configurable G-force thresholds trigger recording flags, reducing blanket continuous storage needs.
• NDAA-compliant; integrates directly with i-PRO Arbitrator vehicle systems via vehicle harness power.

i-PRO · PGYE1069ZAD1

i-PRO HDD Case - PGYE1069ZAD1

• OEM vibration-isolation mounts prevent RV-induced cascade failures in multi-drive arrays.
• Thermal design keeps the drive within its published operating temperature window.
• Direct factory replacement maintains the appliance's acoustic and hot-swap tray compatibility.

i-PRO · IN100-CLX33134-MC1

I-Pro IN100-CLX33134-Bipsb-Nzd-626-Ctsd - IN100-CLX33134-MC1

• OEM-sourced component ensures exact mechanical and electrical fit for IN100-CLX33134 systems.
• Drop-in installation follows i-PRO standard procedures, reducing commissioning labor on-site.
• Factory-new construction with manufacturer warranty protects the installation investment long-term.

i-PRO · WVCF354

i-PRO Indoor Fixed Analog Dome Camera With 650 - WVCF354

• 650 TVL resolution delivers clear monochrome or color output on existing CCTV runs.
• BNC composite output integrates directly with legacy DVRs and analog matrix switchers.
• Supports cable runs up to 300 ft on RG-59 coax without a distribution amplifier.

i-PRO · PWRSWT-S4128T-ON

I-Pro Ips-Utys-Ude-180TB - PWRSWT-S4128T-ON

• 28-port managed PoE switch scales multi-camera deployments without added failure points.
• VLAN and QoS support isolates camera traffic and prioritizes video streams network-wide.
• NDAA-compliant and rack-mountable; integrates directly into i-PRO IPS-UTYS/UDE rack systems.

i-PRO · IPS-LIS-1-4TB

I-pro Legacy Interface Server Unit Includes 1X - IPS-LIS-1-4TB

• 4 TB of onboard storage keeps moderate legacy archives accessible during migration.
• Bridges older i-PRO/Panasonic recording systems to the current evidence-management platform.
• Rack-mount appliance form factor integrates cleanly into existing IT infrastructure.

i-PRO · PML4386

i-PRO Leica Type Zoom Video Adapter F=43-86MM - PML4386

• Leica-type mount enables integration of premium glass into i-PRO camera platforms.
• 43–86mm zoom range supports flexible framing from standard to moderate telephoto.
• Parfocal mechanical construction maintains focus integrity throughout zoom adjustments.

i-PRO · STL2

i-PRO Lenovo ST250 Tower Chassis (do NOT Sell Standalone. - STL2

• Factory-validated for i-PRO recorder software, eliminating field compatibility issues.
• Lenovo ST250 tower chassis is thermal-rated for 24/7 continuous surveillance recording duty.
• Standardized platform simplifies multi-site rollouts and consolidates warranty management.

i-PRO · WVLZ62/8S

i-PRO Lens 1/3 Variable Focal Length Zoom - WVLZ62/8S

• 1/3-inch CCD variable focal length zoom lens
• Manual zoom and focus for precise install framing
• CS-mount interface for standard camera body integration

i-PRO · PARI-3179

i-PRO Lind Universal Radar Interface - PARI-3179

• Bridges radar sensors to i-PRO PTZ cameras for automated slew-to-cue without custom scripting.
• Supports multiple simultaneous radar inputs to coordinate full perimeter coverage from one device.
• Configurable detection filtering reduces nuisance alarms, keeping operator attention on real threats.

i-PRO · BEZEL-SRL2-3

i-PRO Locking Front Bezel SR650 - BEZEL-SRL2-3

• Locking bezel requires tools for removal, deterring tampering on SR650 multi-sensor cameras.
• Powder-coated stamped steel/aluminum construction withstands exterior environmental exposure.
• Field-installable on existing SR650 deployments without compromising optical performance.

i-PRO · M-44-V-V3

i-PRO M-44-V-V3 Advidia 4MP 2688x1520 Turret Camera.

4MP turret with motorized zoom and 40m IR for indoor/outdoor surveillance

• Motorized 2.8–12mm varifocal lens enables remote reframing across 4.3× zoom without site visits.
• IP67/IK10 housing with –30° to 60°C rating suits harsh outdoor and vandal-prone deployments.
• 120 dB WDR and 40m IR at 850nm maintain usable 4MP imagery in backlit or zero-lux conditions.

i-PRO · M-49-V-V2

i-PRO M-49-V-V2 4MP Motorized Varifocal Bullet Camera

4MP outdoor bullet with motorized 2.8–12mm zoom and 40m IR

• Motorized varifocal lens adjusts remotely 2.8–12mm (4.3× zoom) via VMS
• 4MP resolution at 30 fps with 120dB WDR and H.265 compression
• 40m IR night vision, IP67 rated, PoE powered, ONVIF compatible

i-PRO · M-FM

i-PRO M-FM Flush Mount for M-87-V Dome Camera

Flush ceiling mount for i-PRO M-87-V dome cameras, 195mm cutout

• Sheet metal and ABS construction rated IK10 for durable indoor mounting
• 195mm ceiling hole diameter fits standard drop-ceiling installations
• Lightweight 1.08 lbs design simplifies single-person installation

i-PRO · MC-20NKS

I-Pro Mc-20NKS Reader: HID Multi Class Signo Reader W/Bluetooth

• Reads HID Prox, iCLASS SE/SR, and Seos from one head — no dual-reader installs.
• Integrated BLE enables smartphone-based mobile credentials without hardware changes.
• Standard Wiegand output integrates directly with existing access panels and controllers.

i-PRO · MC-8543

i-PRO MC-8543 DESFire EV3 Cards - 4K - ISO - ISO glossy white

• AES-128 mutual authentication resists cloning and replay attacks on access control.
• Multi-application file system consolidates access, payment, and attendance on one card.
• ISO ID-1 form factor at 13.56 MHz drops into existing DESFire EV1/EV2 reader installs.

i-PRO · MC-BT126

i-PRO MC-BT126 Inaltronix BT126

• 12VDC regulated power supply for i-PRO cameras
• DIN-rail mount for clean equipment enclosure install
• 150W at 6A output for multi-camera powering

i-PRO · MC-T3MB755K1D

i-PRO MC-T3MB755K1D Altronix T3MB755K1D

• Selectable 12V DC or 24V AC output at 6A/150W covers mixed camera deployments.
• NDAA-compliant enclosed cabinet rated to -20°C–+49°C for harsh outdoor installs.
• Single 115V AC input feeds multiple outputs, reducing conduit runs to camera clusters.

i-PRO · MC-T3MB777K1D

i-PRO MC-T3MB777K1D Altronix T3MB777K1

• Selectable 12V DC/24V AC output at 6A/150W supports mixed camera deployments.
• Centralized multi-output distribution eliminates individual wall transformers per camera.
• NDAA-compliant enclosed cabinet operates reliably from -20°C to +49°C.

i-PRO · MERCURY-EP1501

i-PRO MERCURY-EP1501 Intelligent Controller with PoE

• Supports H.265, H.264, and MJPEG codecs for flexible mixed-camera deployments.
• Integrated 802.3af PoE eliminates separate power runs to compatible endpoints.
• Ceiling and rack mount options suit both distributed sites and centralized SOCs.

i-PRO · A-34-CAP METAL

I-Pro Metal Cap For A-14 And A-34 - A-34-CAP METAL

• Metal construction resists UV degradation and temperature cycling unlike plastic caps.
• Seals unused conduit entries on A-14 and A-34 junction boxes against moisture and debris.
• Powder-coated finish matches i-PRO mounting hardware for a consistent installation look.

i-PRO · ARB-HT3N

I-Pro MK3 Arb 900 MHZ Wireless Mic Partial Mic Kit TX - Arb-HT3N

• 900 MHz operation avoids Wi-Fi and Bluetooth congestion in dense commercial environments.
• Partial kit format lets integrators select receiver and antenna components per site requirements.
• Compatible with i-PRO camera systems for synchronized audio-video capture in evidence-grade installs.

i-PRO · WVQ115A

i-PRO Mounting Base FOR WV-CW504F Flush Camera - WVQ115A

• IP66-rated base seals against water ingress in damp or spray-exposed ceiling cavities.
• 3-way hinge (horizontal, vertical, swivel) enables precise camera aiming post-mount.
• Exclusively fits WV-CW504F flush-mount variant; not compatible with WV-CW504S.

i-PRO · MC-5365-EKP00

i-PRO MP Wieg Classic BLK 18IN Pigtail Rohs Prox - MC-5365-EKP00

• 125 kHz proximity reads standard prox cards and fobs at 2–4 inch range.
• 26-bit Wiegand output integrates with virtually any access control panel.
• 18-inch pigtail and mullion-mount form factor speed rough-in on narrow frames.