i-PRO · PQKV10062Z

i-PRO Front Cover - PQKV10062Z

When you're maintaining i-PRO camera installations in high-traffic or harsh environments, a damaged front cover can compromise both aesthetics and

• Genuine OEM part restores original IP rating and weatherproof seal integrity.
• Exact factory tolerances ensure proper gasket compression and lens alignment.
• Powder-coated stamped steel/aluminum construction provides UV-resistant durability.

i-PRO · TGS-3DP

i-PRO G-force Sensor FOR Arbitrator Vehicle - TGS-3DP

Mobile surveillance deployments demand precise event correlation beyond simple video triggers

• Three-axis accelerometer tags footage with impact, braking, and turn data for forensic review.
• Configurable G-force thresholds trigger recording flags, reducing blanket continuous storage needs.
• NDAA-compliant; integrates directly with i-PRO Arbitrator vehicle systems via vehicle harness power.

i-PRO · PGYE1069ZAD1

i-PRO HDD Case - PGYE1069ZAD1

Factory HDD case used in compatible i-PRO recording appliances to house and protect the recording drive

• OEM vibration-isolation mounts prevent RV-induced cascade failures in multi-drive arrays.
• Thermal design keeps the drive within its published operating temperature window.
• Direct factory replacement maintains the appliance's acoustic and hot-swap tray compatibility.

i-PRO · IN100-CLX33134-MC1

I-Pro IN100-CLX33134-Bipsb-Nzd-626-Ctsd - IN100-CLX33134-MC1

Hardware accessory engineered for deployment within i-PRO's IN100-CLX33134 surveillance system line

• OEM-sourced component ensures exact mechanical and electrical fit for IN100-CLX33134 systems.
• Drop-in installation follows i-PRO standard procedures, reducing commissioning labor on-site.
• Factory-new construction with manufacturer warranty protects the installation investment long-term.

i-PRO · WVCF354

i-PRO Indoor Fixed Analog Dome Camera With 650 - WVCF354

650TVL fixed analog dome camera built for retrofit deployment into existing closed-circuit TV infrastructure

• 650 TVL resolution delivers clear monochrome or color output on existing CCTV runs.
• BNC composite output integrates directly with legacy DVRs and analog matrix switchers.
• Supports cable runs up to 300 ft on RG-59 coax without a distribution amplifier.

i-PRO · PWRSWT-S4128T-ON

I-Pro Ips-Utys-Ude-180TB - PWRSWT-S4128T-ON

Large-scale IP surveillance deployments demand robust network infrastructure that can reliably power and connect dozens of cameras without

• 28-port managed PoE switch scales multi-camera deployments without added failure points.
• VLAN and QoS support isolates camera traffic and prioritizes video streams network-wide.
• NDAA-compliant and rack-mountable; integrates directly into i-PRO IPS-UTYS/UDE rack systems.

i-PRO · IPS-LIS-1-4TB

I-pro Legacy Interface Server Unit Includes 1X - IPS-LIS-1-4TB

Legacy Interface Server with 4 TB of storage, designed to bridge legacy i-PRO / Panasonic recording systems to the current evidence-management

• 4 TB of onboard storage keeps moderate legacy archives accessible during migration.
• Bridges older i-PRO/Panasonic recording systems to the current evidence-management platform.
• Rack-mount appliance form factor integrates cleanly into existing IT infrastructure.

i-PRO · PML4386

i-PRO Leica Type Zoom Video Adapter F=43-86MM - PML4386

• Leica-type mount enables integration of premium glass into i-PRO camera platforms.
• 43–86mm zoom range supports flexible framing from standard to moderate telephoto.
• Parfocal mechanical construction maintains focus integrity throughout zoom adjustments.

i-PRO · STL2

i-PRO Lenovo ST250 Tower Chassis (do NOT Sell Standalone. - STL2

• Factory-validated for i-PRO recorder software, eliminating field compatibility issues.
• Lenovo ST250 tower chassis is thermal-rated for 24/7 continuous surveillance recording duty.
• Standardized platform simplifies multi-site rollouts and consolidates warranty management.

i-PRO · WVLZ62/8S

i-PRO Lens 1/3 Variable Focal Length Zoom - WVLZ62/8S

When you're deploying fixed cameras in environments where subject distance and field of view requirements vary, a variable focal length lens

• 1/3-inch CCD variable focal length zoom lens
• Manual zoom and focus for precise install framing
• CS-mount interface for standard camera body integration

i-PRO · PARI-3179

i-PRO Lind Universal Radar Interface - PARI-3179

When deploying perimeter security or outdoor surveillance systems that combine radar detection with PTZ cameras, coordinating these disparate devices

• Bridges radar sensors to i-PRO PTZ cameras for automated slew-to-cue without custom scripting.
• Supports multiple simultaneous radar inputs to coordinate full perimeter coverage from one device.
• Configurable detection filtering reduces nuisance alarms, keeping operator attention on real threats.

i-PRO · BEZEL-SRL2-3

i-PRO Locking Front Bezel SR650 - BEZEL-SRL2-3

When deploying multi-sensor cameras in accessible public spaces, exposed domes invite tampering and vandalism

• Locking bezel requires tools for removal, deterring tampering on SR650 multi-sensor cameras.
• Powder-coated stamped steel/aluminum construction withstands exterior environmental exposure.
• Field-installable on existing SR650 deployments without compromising optical performance.

i-PRO · M-44-V-V3

i-PRO M-44-V-V3 Advidia 4MP 2688x1520 Turret Camera.

4MP turret with motorized zoom and 40m IR for indoor/outdoor surveillance

• Motorized 2.8–12mm varifocal lens enables remote reframing across 4.3× zoom without site visits.
• IP67/IK10 housing with –30° to 60°C rating suits harsh outdoor and vandal-prone deployments.
• 120 dB WDR and 40m IR at 850nm maintain usable 4MP imagery in backlit or zero-lux conditions.

i-PRO · M-49-V-V2

i-PRO M-49-V-V2 4MP Motorized Varifocal Bullet Camera

4MP outdoor bullet with motorized 2.8–12mm zoom and 40m IR

• Motorized varifocal lens adjusts remotely 2.8–12mm (4.3× zoom) via VMS
• 4MP resolution at 30 fps with 120dB WDR and H.265 compression
• 40m IR night vision, IP67 rated, PoE powered, ONVIF compatible

i-PRO · M-FM

i-PRO M-FM Flush Mount for M-87-V Dome Camera

Flush ceiling mount for i-PRO M-87-V dome cameras, 195mm cutout

• Sheet metal and ABS construction rated IK10 for durable indoor mounting
• 195mm ceiling hole diameter fits standard drop-ceiling installations
• Lightweight 1.08 lbs design simplifies single-person installation

i-PRO · MC-20NKS

I-Pro Mc-20NKS Reader: HID Multi Class Signo Reader W/Bluetooth

• Reads HID Prox, iCLASS SE/SR, and Seos from one head — no dual-reader installs.
• Integrated BLE enables smartphone-based mobile credentials without hardware changes.
• Standard Wiegand output integrates directly with existing access panels and controllers.

i-PRO · MC-8543

i-PRO MC-8543 DESFire EV3 Cards - 4K - ISO - ISO glossy white

DESFire EV3 contactless smart card in the standard ISO ID-1 form factor, finished in glossy white with 4K memory

• AES-128 mutual authentication resists cloning and replay attacks on access control.
• Multi-application file system consolidates access, payment, and attendance on one card.
• ISO ID-1 form factor at 13.56 MHz drops into existing DESFire EV1/EV2 reader installs.

i-PRO · MC-BT126

i-PRO MC-BT126 Inaltronix BT126

When you're deploying i-PRO cameras in locations without existing low-voltage infrastructure, running new conduit isn't always feasible or

• 12VDC regulated power supply for i-PRO cameras
• DIN-rail mount for clean equipment enclosure install
• 150W at 6A output for multi-camera powering

i-PRO · MC-T3MB755K1D

i-PRO MC-T3MB755K1D Altronix T3MB755K1D

When your surveillance deployment requires reliable power distribution across multiple cameras in outdoor or environmentally challenging locations

• Selectable 12V DC or 24V AC output at 6A/150W covers mixed camera deployments.
• NDAA-compliant enclosed cabinet rated to -20°C–+49°C for harsh outdoor installs.
• Single 115V AC input feeds multiple outputs, reducing conduit runs to camera clusters.

i-PRO · MC-T3MB777K1D

i-PRO MC-T3MB777K1D Altronix T3MB777K1

• Selectable 12V DC/24V AC output at 6A/150W supports mixed camera deployments.
• Centralized multi-output distribution eliminates individual wall transformers per camera.
• NDAA-compliant enclosed cabinet operates reliably from -20°C to +49°C.

i-PRO · MERCURY-EP1501

i-PRO MERCURY-EP1501 Intelligent Controller with PoE

N intelligent edge controller designed to streamline network surveillance deployments by consolidating access control, I/O management, and PoE power

• Supports H.265, H.264, and MJPEG codecs for flexible mixed-camera deployments.
• Integrated 802.3af PoE eliminates separate power runs to compatible endpoints.
• Ceiling and rack mount options suit both distributed sites and centralized SOCs.

i-PRO · A-34-CAP METAL

I-Pro Metal Cap For A-14 And A-34 - A-34-CAP METAL

When you need to terminate conduit runs or protect unused junction box openings on i-PRO camera installations, exposed holes create vulnerability

• Metal construction resists UV degradation and temperature cycling unlike plastic caps.
• Seals unused conduit entries on A-14 and A-34 junction boxes against moisture and debris.
• Powder-coated finish matches i-PRO mounting hardware for a consistent installation look.

i-PRO · ARB-HT3N

I-Pro MK3 Arb 900 MHZ Wireless Mic Partial Mic Kit TX - Arb-HT3N

• 900 MHz operation avoids Wi-Fi and Bluetooth congestion in dense commercial environments.
• Partial kit format lets integrators select receiver and antenna components per site requirements.
• Compatible with i-PRO camera systems for synchronized audio-video capture in evidence-grade installs.

i-PRO · WVQ115A

i-PRO Mounting Base FOR WV-CW504F Flush Camera - WVQ115A

Dedicated mounting base designed for the i-PRO WV-CW504F flush-mount vandal dome camera

• IP66-rated base seals against water ingress in damp or spray-exposed ceiling cavities.
• 3-way hinge (horizontal, vertical, swivel) enables precise camera aiming post-mount.
• Exclusively fits WV-CW504F flush-mount variant; not compatible with WV-CW504S.

i-PRO · MC-5365-EKP00

i-PRO MP Wieg Classic BLK 18IN Pigtail Rohs Prox - MC-5365-EKP00

When you're deploying access control across multiple facilities with varying panel manufacturers, you need proximity readers that speak universal

• 125 kHz proximity reads standard prox cards and fobs at 2–4 inch range.
• 26-bit Wiegand output integrates with virtually any access control panel.
• 18-inch pigtail and mullion-mount form factor speed rough-in on narrow frames.

i-PRO · MR-SBVGASKET

i-PRO MR-SBVGASKET Camera Gasket and Molded Ring

• Weatherproof sealing blocks dust and moisture ingress, protecting optics and electronics.
• Molded ring ensures even pressure distribution, eliminating light leaks at mounting surfaces.
• Compatible with 802.3af PoE camera architectures, simplifying rack-mount installation cabling.

i-PRO · MX-O-SMA-S-6D016

i-PRO MX-O-SMA-S-6D016 Sensor Module Fisheye Camera

Ultra-wide 180° horizontal coverage in a compact, modular design engineered for flexible surveillance deployment across diverse facility types

• 180° fisheye FOV from a single 1 MP sensor reduces camera count in open areas.
• IP66-rated housing withstands dust and water jets for indoor or outdoor deployment.
• 802.3af PoE eliminates auxiliary power supplies, simplifying multi-camera cabling.

i-PRO · MX-O-SMA-S-6D079

i-PRO MX-O-SMA-S-6D079 Sensor Module S16/M16 S15/M15 with HD

Replacement sensor module designed for integration into i-PRO's S16/M16 and S15/M15 modular camera platforms

• 6MP HD sensor replaces aging elements in S16/M16 and S15/M15 bodies without full head swap.
• SMA connector interface enables field installation with no soldering or mechanical rework required.
• Targeted sensor refresh extends service life of existing deployments, reducing capital replacement costs.

i-PRO · MX-O-SMA-S-6D237

i-PRO MX-O-SMA-S-6D237 Sensor Module S16/M16 S15/M15 with HD

When you need to expand coverage or upgrade imaging capabilities on existing i-PRO modular camera systems, swapping sensor modules delivers immediate

• HD sensor upgrades S16/M16 and S15/M15 bodies without replacing the full camera.
• Field-swappable module cuts downtime; existing cabling and network config stay intact.
• Camera body auto-recognizes the new sensor, preserving VMS and analytics integration.

i-PRO · MX-O-SMA-TS-R079

i-PRO MX-O-SMA-TS-R079 Thermal Sensor for S16 with 45 Degree FOV

Thermal sensor module for the MOBOTIX S16 multi-sensor camera platform, configured with a 45-degree field of view

• VOx microbolometer enables reliable detection in low-light and obscured conditions.
• 45° FOV suits medium-range perimeter monitoring with useful area coverage per module.
• Field-swappable into S16 body—no cable pulls or camera replacement required.

i-PRO · NDE80TSPA626SPA6-1

i-PRO NDE Networked or Offline Lock - CY - NDE80TSPA626SPA6-1

• Operates networked or offline, preserving access permissions during connectivity loss.
• ANSI/BHMA Grade 1 rated; field-reversible handing reduces installation SKU complexity.
• Supports iCLASS SE, Multiclass, and MIFARE credentials on a single NDAA-compliant reader.

i-PRO · IPS-ICV-UNINSTALL

I-Pro One Day Of Uninstalling Vehicle Or - Ips-Icv-Uninstall

When decommissioning fleet vehicles or reconfiguring mobile surveillance deployments, properly removing i-PRO in-car video systems requires

• Full-day technician removes cameras, DVRs, cabling, and mounts without vehicle damage.
• Covers i-PRO Arbitrator, VITRAN, and Investigator systems including CAN bus disconnection.
• Equipment is inventoried and documented for redeployment; residual media handled securely.

i-PRO · WVCW314L

i-PRO Outdoor BOX IR LED Analog Camera 16 Axis Matrix - WVCW314L

N outdoor box-form analog camera built around a 16-axis matrix LED infrared illumination array

• 16-axis matrix IR array lets you tune illumination per zone without repositioning.
• Outputs standard CVBS over coax — direct retrofit for existing analog DVR/hybrid NVR.
• C-mount and J-box compatible for straightforward integration into standard enclosures.

i-PRO · AGC20003GM

i-PRO Panasonic 3M Camera Head Cable FOR AG-MDC10G - AGC20003GM

When deploying modular camera systems with separate head units and processor boxes, cable length becomes a critical factor in installation

• 3-meter reach separates AG-MDC10G camera head from processor for tight-space installs.
• Factory-terminated connectors carry video, power, and control signals without field termination.
• NDAA compliant; integrates directly into i-PRO modular camera ecosystem architecture.

i-PRO · AGMDR15

i-PRO Panasonic AGMDR15 Full HD Portable Recorder - Clear

Portable evidence recorder designed for field investigations and surveillance operations requiring a self-contained mobile capture device

• Full HD capture preserves identifiable detail for evidentiary-grade footage.
• Self-contained battery operation enables field deployment without external power.
• Removable media supports direct evidence handoff with chain-of-custody workflows.

i-PRO · VITRAN-OSSPRT-INSTL

I-Pro Per Mile Travel Fee 1X Exterior IP - Vitran-Ossprt-Instl

When deploying exterior IP surveillance systems in remote or distributed locations, travel costs can erode project margins if not properly accounted

• Per-mile billing recovers travel costs precisely for remote exterior IP deployments.
• Compatible with i-PRO Arbitrator, VITRAN, and Investigator vehicle systems.
• Transparent line-item structure supports accurate bid scoping for multi-site rollouts.