Pelco · FMCI-PF1POE

Pelco FMCI-PF1POE SFP Fiber Converter with PoE

Fiber converter with integrated PoE for Pelco cameras over extended runs

• 100 Mbps Fast Ethernet via SFP interface with user-supplied transceiver
• Single camera PoE output at fiber link end where local power unavailable
• NDAA Section 889 compliant for government and regulated deployments

Pelco · FMCI-PF2

Pelco FMCI-PF2 Dual-Channel SFP Fiber Media Converter

Dual-channel SFP fiber converter consolidates two 100 Mbps camera links

• Independent channels support mixed fiber types on one unit
• User-supplied SFP modules customize reach and fiber compatibility per channel
• NDAA Section 889 and TAA compliant for government security deployments

Pelco · FMCI-PG1

Pelco FMCI-PG1 Gigabit SFP Fiber Media Converter

Gigabit fiber media converter for Pelco cameras—no config needed

• Layer 1 transparent operation with one RJ45 and one SFP fiber port
• Accepts standard SFP transceivers (sold separately) for any fiber type
• DIN rail or surface mount; NDAA Section 889 compliant for government use

Pelco · FMCI-PG1M

Pelco FMCI-PG1M Gigabit SFP Fiber Media Converter

Gigabit SFP fiber-to-copper converter for Pelco IP cameras, no config

• 1000 Mbps throughput over fiber with standard SFP transceiver (sold separately)
• Layer 1 transparent bridging — plug in and operate, zero management interface
• Mini DIN rail enclosure with RJ45 copper port for direct camera connection

Pelco · FMCI-PG1POE

Pelco FMCI-PG1POE Gigabit PoE Fiber Media Converter

Gigabit fiber-to-copper converter with integrated PoE for Pelco cameras

• Single SFP transceiver slot supports flexible fiber types and distances
• 802.3af/at PoE output on RJ45 eliminates need for separate injectors
• NDAA Section 889 compliant for government and campus security deployments

Pelco · FMCI-PG2

Pelco FMCI-PG2 Dual-Port Gigabit Fiber Converter

Dual-channel Gigabit fiber-to-copper converter for Pelco systems

• Two independent SFP fiber ports + two RJ45 copper ports in one unit
• User-selectable SFP transceivers support mixed fiber types and distances
• Plug-and-play setup with zero configuration required for field deployment

Pelco · FRV10D1M1ST

Pelco FRV10D1M1ST 1-Ch Fiber Video+Data Receiver

1-channel fiber receiver for analog video + PTZ control over multimode

• Receives video and data on single multimode fiber run with ST connector
• Pairs with FSV10D1M1ST transmitter for complete headend/control room link
• NDAA Section 889 compliant for regulated surveillance deployments

Pelco · FRV20M2ST

Pelco FRV20M2ST 2-Channel Fiber Video Receiver

2-channel fiber video receiver for analog CCTV over multimode ST

• Receives dual analog CCTV signals via multimode fiber with ST connectors
• Rack-mountable design integrates with Pelco FTV20M2ST transmitters
• NDAA Section 889 compliant for government and regulated installations

Pelco · FSFP-EFSM2LC20

Pelco FSFP-EFSM2LC20 Single-Mode Fiber SFP Module

Single-mode fiber SFP for 100 Mbps Fast Ethernet up to 20 km

• 1310 nm wavelength with LC duplex connectors for OS1/OS2 fiber
• Extends camera feeds 20 km over single-mode fiber infrastructure
• 100BASE-FX transceiver module rated NDAA Section 889 compliant

Pelco · FSFP-EGSM2LC15

Pelco FSFP-EGSM2LC15 Gigabit SFP Single-Mode 15km

1000BASE-LX SFP for 15km single-mode fiber runs

• 1310 nm wavelength over OS1/OS2 fiber to 15 km distance
• Duplex LC connectors with Gigabit Ethernet connectivity
• NDAA Section 889 compliant for regulated installations

Pelco · FTV10D1M1ST

Pelco FTV10D1M1ST 1-Ch Video+Data Fiber Transmitter

Single-fiber video + PTZ control for Pelco analog camera systems

• Combines analog video and bidirectional PTZ data on one multimode fiber
• ST connector interface with camera-end deployment simplifies fiber runs
• NDAA Section 889 compliant for government and regulated installations

Pelco · MBX1MAA

Pelco MBX1MAA ExSite Pro Stainless Steel Comms Box

230 Vac to 24 Vac converter in stainless steel for outdoor ExSite Pro

• Stainless steel enclosure resists corrosion in coastal and industrial environments
• Converts 230 Vac mains input to 24 Vac output for remote camera accessories
• Weatherproof rated for outdoor installations; NDAA Section 889 compliant

Pelco · MBX2MAA

Pelco MBX2MAA ExSite Pro 24Vac Communications Box

Stainless steel 24Vac pass-through box for Pelco ExSite Pro outdoor systems

• 24Vac input/output pass-through eliminates need for voltage conversion
• Stainless steel weatherproof enclosure rated for outdoor year-round use
• NDAA Section 889 compliant for government and regulated installations

Pelco · MBX3MAA

Pelco MBX3MAA ExSite Pro SS Communications Box

Stainless steel 120V-to-24V converter for outdoor ExSite Pro systems

• Weatherproof stainless steel enclosure resists corrosion in coastal/marine environments
• Converts 120 Vac mains power to regulated 24 Vac for ExSite Pro accessories
• NDAA Section 889 compliant for government and critical infrastructure deployments

Pelco · SM24TAT2SA-NA

Pelco SM24TAT2SA-NA 26-Port Gigabit Managed PoE+ Switch

26-port Gigabit PoE+ switch with 370W power for mid-size surveillance

• 24 PoE+ ports deliver 370W aggregate power across Gigabit connections
• 2 SFP fiber uplinks support backbone connectivity for network expansion
• Managed switching with VLAN and QoS for traffic control and segmentation

Pelco · SM8TAT2SA-NA

Pelco SM8TAT2SA-NA 8-Port GbE PoE+ Managed Switch

8-port managed PoE+ switch for IP camera networks, 120W total power

• Eight Gigabit ports with IEEE 802.3at PoE+ at 30W per port eliminates separate injectors
• VLAN and QoS support isolates camera traffic and prioritizes critical surveillance feeds
• 120W power budget covers medium-scale deployments without additional power infrastructure

TP-Link · DS-PMA-C+

TP-Link DS-PMA-C+ GPON OLT SFP optical module Class C+

• Class C+ GPON OLT SFP optical transceiver module
• Drop-in module for compatible GPON OLT platforms
• Extended optical budget for longer fiber-loop distances

TP-Link · MC1400

TP-Link MC1400 Omada 14-Slot Media Converter Chassis

14-slot rackmount housing for TP-Link Omada media converter modules

• 14-slot rackmount chassis for Omada media converter modules
• Consolidates fiber bridges into a single 1U power footprint
• Centralized power distribution for converter banks

Transition Networks · A21H0

Transition Networks A21H0 Wireless Antenna

Wireless antenna for Transition Networks switches in industrial setups

• DIN rail mount consolidates wireless antenna alongside switches on industrial racks.
• Multi-mode fiber backhaul support extends wireless coverage over existing fiber runs.
• Unmanaged Gigabit integration across 8 ports eliminates SNMP overhead on antenna nodes.

Transition Networks · A33MO

Transition Networks A33MO LTE Antenna

Industrial LTE antenna with DIN-rail mounting for remote connectivity

• DIN-rail mount eliminates brackets, reducing panel installation time on existing racks.
• Industrial temperature rating prevents thermal derating in outdoor or unheated enclosures.
• LTE support delivers cellular WAN connectivity where fiber or fixed broadband is unavailable.

Transition Networks · C2110-1011

Transition Networks C2110-1011 Media Converter Single Mode Fiber

100Mb single mode fiber converter, DIN rail mount, zero config

• Bridges copper RJ-45 to single mode SC fiber for extended 100Mb point-to-point links.
• DIN rail mount integrates directly into control cabinets and network racks without adapters.
• Unmanaged and TAA compliant with lifetime warranty — zero config, deploy-and-forget.

Transition Networks · C2110-1013

Transition Networks C2110-1013 100Mbps Fiber Media Converter

100Mbps fiber converter extends networks 1.2 miles over single-mode

• Extends copper networks 1.2 miles over single-mode fiber, bypassing EMI-prone runs.
• Unmanaged 100Mbps conversion requires zero configuration for fast IP camera deployment.
• TAA compliant with lifetime warranty and DIN rail mount for industrial rack installs.

Transition Networks · C2110-1019

Transition Networks C2110-1019 32-Port Unmanaged Gigabit Switch

32-port gigabit switch, DIN rail mount, zero configuration

• All 32 ports run at 1 Gbps full duplex — no bottlenecks on dense camera deployments.
• Unmanaged operation means zero config overhead and no firmware to maintain post-install.
• 35mm DIN rail mount fits directly into industrial enclosures; lifetime warranty backs it.

Transition Networks · C2110-1039

Transition Networks C2110-1039 100BASE-TX Fiber Media Converter

100 Mbps copper-to-fiber converter with 1.2-mile single-mode range

• 100 Mbps Fast Ethernet bidirectional fiber-to-copper conversion
• Single-mode fiber for camera, access control, and NVR connectivity
• DIN rail mount unmanaged converter with TAA-compliant build

Transition Networks · C2210-1011

Transition Networks C2210-1011 Fiber Media Converter

Single-mode fiber media converter, 10/100 Mbps, extends networks to 1.2 miles

• Extends copper-to-single-mode fiber links up to 1.2 miles for remote site runs.
• Plug-and-play unmanaged operation eliminates configuration overhead during deployment.
• TAA compliant design supports government and federally funded project requirements.

Transition Networks · C2210-1013

Transition Networks C2210-1013 10/100BASE-TX Fiber Media

Single-mode fiber to copper converter extends networks 1.2 miles

• Extends copper networks up to 1.2 miles over single-mode fiber at 100 Mbps.
• Unmanaged plug-in module simplifies cabinet and field deployment with no configuration.
• TAA-compliant design suits government and regulated enterprise security infrastructure.

Transition Networks · C2210-1014

Transition Networks C2210-1014 32-Port Unmanaged Gigabit Switch

32-port gigabit unmanaged switch with DIN-rail mount for plug-and-play deployment

• All 32 ports run at 1000 Mbps wire speed with no management overhead.
• Single-mode fiber support enables uplinks beyond 10 km without repeaters.
• DIN-rail mount installs directly into industrial enclosures; no CLI needed.

Transition Networks · C2210-1019

Transition Networks C2210-1019 Media Converter 10/100BASE-TX

Single-mode fiber to 10/100BASE-TX copper converter for extended network reach

• Extends copper Ethernet up to 1.2 miles over single-mode fiber at 100 Mbps.
• DIN rail mount simplifies deployment in industrial enclosures and control panels.
• Unmanaged design requires zero configuration for plug-and-play copper-to-fiber conversion.

Transition Networks · C2210-1039

Transition Networks C2210-1039 32-Port Unmanaged Gigabit Switch

32-port gigabit switch with single-mode fiber and DIN-rail mount

• All 32 ports run at 1 Gbps, eliminating bottlenecks on dense IP camera deployments.
• Single-mode fiber support extends links beyond 10 km, no repeaters needed.
• DIN-rail mount and zero-config operation cut installation time in panel enclosures.

Transition Networks · C3100-4040

Transition Networks C3100-4040 Multi-Rate Fiber Media Converter

Single-mode fiber media converter with 2.5 GBps for multi-protocol networks

• 2.5 GBps single-mode fiber throughput supports high-density backbone links.
• Multi-protocol support spans SONET, Fibre Channel, GbE, InfiniBand, and FDDI.
• DIN-rail mount simplifies installation in control enclosures; unmanaged, zero-config.

Transition Networks · C3210-1013

Transition Networks C3210-1013 32-Port Unmanaged Switch

32-port gigabit switch with single-mode fiber, DIN rail mount

• All 32 copper ports deliver full 1000 Mbps—no oversubscription across camera or access-control clusters.
• Single-mode fiber uplink extends connectivity kilometers beyond copper for perimeter surveillance runs.
• Unmanaged, DIN rail design drops into telecom cabinets with zero configuration and lifetime warranty coverage.

Transition Networks · C3210-1014

Transition Networks C3210-1014 32-Port Gigabit Unmanaged Switch

32-port gigabit unmanaged switch, DIN-rail mount, zero config

• All 32 ports run at 1 Gbps full-duplex with no backplane oversubscription.
• Unmanaged design enables zero-config deployment — powers on and forwards traffic immediately.
• DIN-rail mount and single-mode fiber support simplify installation in distributed cabinets.

Transition Networks · C3210-1039

Transition Networks C3210-1039 Gigabit Single Mode Fiber Media

Gigabit single-mode fiber converter, 1000BASE-T to 1000BASE-SX

• Converts 1000BASE-T copper to single-mode fiber at full 1 Gbps throughput.
• DIN rail mount integrates directly into standard cabinets without extra hardware.
• Unmanaged operation requires zero configuration, reducing deployment time on site.

Transition Networks · C3210-1040

Transition Networks C3210-1040 32-Port Gigabit Switch

32-port gigabit unmanaged switch with single-mode fiber uplinks

• All 32 gigabit ports deliver wire-speed switching with zero configuration required.
• Single-mode fiber uplinks extend network reach beyond copper's 100 m limit.
• DIN rail mount simplifies installation in industrial panels and control cabinets.

Transition Networks · C3220-1014

Transition Networks C3220-1014 32-Port Gigabit Switch

32-port gigabit switch with DIN rail mounting for compact deployments

• 32 x 10/100/1000BASE-T ports handle 24+ camera uplinks without bottlenecks.
• Single-mode fiber support extends links up to 10 km without intermediate switches.
• DIN rail mount fits 35 mm rails in control cabinets; no rack space required.

Transition Networks · C3220-1040

Transition Networks C3220-1040 32-Port Gigabit Unmanaged Switch

32-port gigabit unmanaged switch with fiber for plug-and-play networks

• All 32 ports run 10/100/1000BASE-T with auto-negotiation—no manual port config needed.
• Single-mode fiber uplink extends backbone reach up to 10 km, eliminating ground loops.
• DIN rail mount fits standard 35mm rail in electrical cabinets with no extra brackets.