DMP

DMP

SKU: 2W-BLX

DMP 2W-BLX System Sensor Smoke Detector

• Addressable LX-Bus module assigns a unique address per point on XR Series panels.
• Panel-powered via LX-Bus eliminates dedicated power runs to each sensor location.
• Single-point zone reporting delivers smoke and fire status directly to the control panel.

DMP

SKU: USB

DMP USB Multi-Technology Access Control Reader

USB multi-technology reader for mixed credential deployments

• Reads both 125kHz proximity and 13.56MHz NFC credentials from a single reader head.
• USB interface moves credential format logic to panel software, not door hardware.
• Integrated 15-foot cable covers standard door-mount runs without hubs or amplifiers.

DMP

SKU: MET-44WG-18

DMP MET-44WG-18 Overhead Contact

TCP/IP overhead contact for networked door/window detection

• TCP/IP communication eliminates dedicated analog wiring runs to each sensor point.
• Overhead form factor enables ceiling or transom mounting without door-frame hardware.
• Integrates directly with DMP TCP/IP-zone-capable control panels and management systems.

DMP

SKU: CX-702

DMP CX-702 PIR Motion Detector 70' x 70' Coverage

70' x 70' PIR motion detector for wired intrusion systems

• 70' x 70' coverage monitors ~4,900 sq ft per sensor, reducing device count on large sites.
• 12VDC operation integrates into existing panel aux power loops — no separate supply needed.
• Passive infrared sensing eliminates active illumination and resists false alarms from light shifts.

DMP

SKU: CM-310GPTE

DMP CM-310GPTE Slimline Push to Exit Button

Slimline push-to-exit button with TCP/IP networking for access control

• Runs on 24VDC, matching standard door-zone power supplies with no added distribution hardware.
• Native TCP/IP communication eliminates gateway hardware, reducing labor on networked deployments.
• HID credential compatibility lets integrators standardize reader ecosystems across the facility.

DMP

SKU: 866

DMP 866 Notification Module

12VDC auxiliary notification module for DMP access control expansion

• Runs on 12VDC, integrating directly into existing access control cabinet power supplies.
• Auxiliary architecture adds notification endpoints without disrupting active panel configs.
• Scales multi-door and multi-reader deployments without replacing core control infrastructure.

DMP

SKU: 738A

DMP 738A Interface Expansion Module

TCP/IP expansion module for DMP control panels with 12VDC operation

• TCP/IP communication eliminates proprietary serial links for clean network integration.
• Draws 12VDC from existing panel supply rail—no separate regulated power source needed.
• Slot-based form factor (5.5"×3"×0.75") minimizes panel footprint versus stand-alone boxes.

DMP

SKU: 736P

DMP 736P Radionics POPIT Interface Module

• Interfaces DMP systems with Radionics POPIT devices for cross-platform integration.
• Expansion module form factor simplifies addition to existing DMP control panel installations.
• Datasheet available for download to support pre-deployment planning and compliance review.

DMP

SKU: 718T

DMP 718T Plug-In Screw Terminal Module

Plug-in screw terminal module for DMP expansion platforms

• Captive screw terminals eliminate soldering, cutting field termination time during installs.
• Plug-in design fits standard DMP expansion slots, enabling I/O scaling without chassis replacement.
• Compact 4.50×2.75×1.75 in form factor supports wall-mount deployment in tight panel enclosures.

DMP

SKU: 716

DMP 716 Output Expansion Module

15VDC relay expansion for multi-door access control without main panel swap

• DMP output expansion module adds switched outputs to control panels
• 15VDC native DMP platform power - no aux supply required
• Modular expansion drops into existing DMP electrical closet wiring

DMP

SKU: 711

DMP 711 Zone Expansion Module

Network-based zone expansion module with TCP/IP and keypad reader support

• TCP/IP communication plugs into existing Ethernet infrastructure, eliminating proprietary cabling.
• Keypad reader support enables PIN-based credential entry at each expansion zone.
• Runs at 15VDC, integrating cleanly into standard security power distribution backbones.

DMP

SKU: 263EXT

DMP 263EXT Cellular Extension Module

Cellular expansion module for DMP systems without landline or broadband

• Adds cellular communication to compatible DMP control panels where landline or broadband is unavailable.
• Supports primary or backup cellular path, reducing single-point-of-failure risk at remote sites.
• Integrates within the DMP ecosystem, simplifying procurement and support for existing deployments.

DMP

SKU: 1158

DMP 1158 Wireless 8-Zone Input Module

Wireless 8-zone input module for retrofit door/window monitoring without cables

• Eight independent 12VDC zone inputs cover doors and windows without new cable runs.
• Wireless connectivity eliminates conduit work in retrofits, leased spaces, and warehouses.
• Integrates with DMP control panel ecosystems to expand zone capacity without panel replacement.

DMP

SKU: 1142-GUARD

DMP 1142-GUARD Under-Desk Hold-Up Transmitter Guard

Concealed under-desk mount for DMP wireless panic-holdup transmitters

• Purpose-built guard ensures mechanical fit with DMP wireless panic-holdup transmitters.
• Under-desk concealed mount prevents tampering and accidental activation in high-traffic areas.
• Ergonomic guard design allows authorized staff rapid two-button activation during incidents.

DMP

SKU: 1139

DMP 1139 Wireless Bill Trap

Wireless bill trap for panic-holdup systems without hardwired installation

• Wireless transmission eliminates hardwired loops to teller windows and service counters.
• Includes two CR2450 coin cell batteries, enabling deployment without external power runs.
• Compact bracket (2.5" L × 1.3" W) supports discreet mounting in transaction zone retrofits.

DMP

SKU: 1136

DMP 1136 Wireless Remote Chime

Wireless chime for access control with audio-visual alerts, no hardwired sounder lines

• Wireless operation eliminates dedicated audio cable runs to doors, docks, and remote zones.
• Keypad-based sounder triggers on door events or credential reads with per-zone event mapping.
• Compact 2.6" W × 5" H × 1.5" D form factor fits standard access control mounting locations.

DMP

SKU: 1132

DMP 1132 Wireless Recessed Door Contact

Wireless recessed door contact for flush-mount zone monitoring

• Recessed flush-mount design eliminates protrusions, reducing damage risk at high-traffic doors.
• Wireless communication removes hardwired sensor runs, enabling clean retrofits without wall cabling.
• Includes one 3.6V lithium 1/2AA battery with up to 5-year life expectancy in standard response mode.

DMP

SKU: PSD100

DMP PSD100 Vault Audio Detector

Audio detector for vault and perimeter intrusion monitoring

• Selectively triggers on forced-entry acoustics—glass break, prying, cutting—reducing false alerts.
• Integrates directly into DMP XT and XR Series panels via standard zone inputs; no separate infrastructure.
• Runs on 12V DC panel-derived power, simplifying wiring in vault and high-value storage deployments.

DMP

SKU: HUB-T

DMP HUB-T Hold-up Button Reader

TCP/IP hold-up button reader for DMP hub panic alert integration

• TCP/IP communication eliminates dedicated hardwired panic lines, lowering installation cost.
• Integrates directly into DMP hub topologies, routing panic signals to existing control panels.
• Compact 2.06" × 3.44" × 1.25" footprint fits discreet mounting in retail, bank, or warehouse sites.

DMP

SKU: 699-W

DMP 699-W Metal Keypad Deskstand

Metal deskstand for NFC and 13.56MHz keypad readers in offices

• Rigid metal frame maintains reader alignment across high-volume NFC/13.56MHz auth cycles.
• Includes mounting screws, rubber pads, and 4-ft RJ11 cord for immediate counter deployment.
• Compact 12.5"W × 9.5"H × 3.75"D footprint suits space-constrained lobbies and checkpoints.