DMP PSD100 Vault Audio Detector
Overview
The DMP PSD100 is a self-contained audio detector accessory that identifies intrusion by selectively triggering on the acoustic signature of forced entry—glass breaking, prying, cutting—while filtering out ambient noise typical of normal facility operation. This matters because traditional motion or contact sensors alone leave gaps; the PSD100 fills vault, safe room, and high-value storage perimeters where sound-triggered detection adds a layer of detection that catches attacks before or simultaneous with physical breach. It integrates into DMP XT Series and XR Series control panels, extending your existing intrusion system without requiring separate monitoring infrastructure.
Compatibility
The PSD100 is designed for deployment with DMP XT Series and XR Series intrusion control panels. It functions as an intrusion system accessory and wires into your panel's input zones following standard intrusion system protocols. Confirm your panel model supports audio detector inputs before ordering; contact your integrator or DMP directly if you are unsure whether your existing system can accommodate this device.
Installation Notes
The PSD100 is a solid-state device requiring standard intrusion system wiring and 12V DC power derived from your DMP panel. Mount the detector in the space being protected—vault interiors, safe rooms, or high-value storage areas—positioning it to capture breaking glass and forced-entry sounds while minimizing false triggers from normal operational noise (HVAC, machinery, voices). Typical installations run a pair of twisted shielded wires from the panel's audio input zone to the detector location; keep runs under 300 feet to avoid signal degradation. Consult your panel documentation and the PSD100 technical documentation for exact wiring pinouts and zone configuration.
