Panduit U01N11V vs Panduit U01N12L: Specification Comparison
Both the Panduit U01N11V and U01N12L are 1 kVA, 2U rack-mount UPS units in the SteadySine™ sub-brand, sharing identical physical footprints and the same target application tier — Data Center, Edge, and Enterprise MTDC. The comparison hinges on three critical axes for this product class: input/output voltage and topology, battery chemistry and runtime logistics, and bundled management capabilities. Buyers choosing between these two are essentially selecting for regional voltage standards and the operational tradeoffs of battery technology, not for capacity differences.
In This Guide
Which unit matches your voltage infrastructure and UPS topology?
The U01N12L specifies 230V single-phase input and 230V single-phase output, paired with a Double Conversion (Online) topology that delivers zero transfer time — the load runs continuously off the inverter with no switching gap during a mains event. Its waveform is confirmed as Pure Sinewave.
The U01N11V does not state an input or output voltage in the provided specifications, nor does it specify topology or transfer time. Only the sub-brand (SteadySine™) implies sinewave output, but no numeric voltage or topology confirmation is present in the available data. Buyers requiring a confirmed 120V single-phase unit should verify against the product datasheet (/content/product-datasheets/U01N11V.pdf) before specifying.
For 230V single-phase environments demanding zero-transfer online protection — common in EU, APAC, and international co-location deployments — the U01N12L is unambiguously specified. For North American 120V deployments, the U01N11V's SKU suffix 'V' and the product description '120V SGL Phea' (Single Phase) strongly suggest 120V, but this is drawn from the product title, not a discrete spec field.
How do the battery chemistry, lifespan, and hot-swap logistics compare?
The U01N12L specifies Lithium-Ion chemistry with a rated battery life exceeding 10 years and a recharge time of under 2 hours to 90% capacity. It also confirms hot-swappable battery support, meaning the unit can have its battery replaced under load without a maintenance window.
The U01N11V provides no battery chemistry, battery life, recharge time, or hot-swap status in the available specifications. These are material unknowns for a data center procurement decision, particularly for facilities with extended MTBF targets or those operating under service level agreements that prohibit planned downtime.
For any deployment prioritizing battery longevity — lithium-ion typically outlasts VRLA/AGM by 2–3× on calendar life — and the ability to swap batteries without downtime, the U01N12L's specified attributes represent a concrete operational advantage. The U01N11V cannot be evaluated on these dimensions from the provided data alone.
What network management and remote monitoring does each unit support?
The U01N12L includes an Intelligent Network Card in the box and supports SNMP v2 and v3, HTTP/HTTPS access, and Email Alerts natively. This means the unit ships ready for integration into NMS platforms (SolarWinds, PRTG, Nagios, etc.) and infrastructure monitoring stacks without an additional card purchase.
The U01N11V provides no network management specifications in the available data. No mention of a network card (included or optional), SNMP support, HTTP interface, or alerting protocol appears in the spec fields. Whether an optional card slot exists is not stated.
For IT buyers requiring out-of-band UPS monitoring, automated shutdown sequencing, or DCIM integration, the U01N12L's bundled network card and confirmed SNMP v2/v3 support are directly actionable. The U01N11V's management capabilities cannot be confirmed from the provided specifications and would require datasheet review before inclusion in a monitored infrastructure stack.
Which should you choose: the U01N11V or the U01N12L?
Our take: The U01N12L is the stronger choice when the deployment environment runs 230V single-phase power and requires enterprise-grade runtime assurance and management readiness out of the box. Three concrete spec deltas drive this: (1) the U01N12L confirms Double Conversion (Online) topology with zero transfer time versus no topology data for the U01N11V; (2) the U01N12L specifies Lithium-Ion batteries rated 10+ years with hot-swap support and sub-2-hour recharge, while the U01N11V lists no battery specifications; (3) the U01N12L ships with an Intelligent Network Card supporting SNMP v2/v3 and HTTPS, versus no management specs for the U01N11V. The U01N11V should be evaluated for 120V North American environments where its voltage suitability is implied by product title, but buyers must consult the datasheet to confirm topology, battery type, and management options before specifying it.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | Panduit U01N11V | Panduit U01N12L |
|---|---|---|
| SKU | U01N11V | U01N12L |
| Sub-Brand | SteadySine™ | SteadySine™ |
| Product Type | UPS | Uninterruptible Power Supply (UPS) |
| Output Power | — | 1 kVA / 900W |
| Input Voltage | 120V Single Phase (title only) | 230V Single Phase |
| Output Voltage | — | 230V Single Phase |
| UPS Topology | — | Double Conversion (Online) |
| Transfer Time | — | Zero (Online) |
| Waveform | Implied sinewave (sub-brand) | Pure Sinewave (specified) |
| Battery Type | — | Lithium-Ion |
| Battery Life | — | 10+ Years |
| Recharge Time | — | <2 Hours to 90% |
| Hot-Swappable Battery | — | Yes |
| Form Factor | 2U Rack-Mount | 2U Rack-Mount |
| Height | 3.4 in (86.5 mm) | 3.4 in (86.5 mm) |
| Width | 17.3 in (440 mm) | 17.3 in (440 mm) |
| Network Management | — | SNMP v2/v3, HTTP/HTTPS, Email Alerts |
| Network Card Included | — | Yes (Intelligent Network Card) |
| Rail Kit Included | — | Yes |
| Operating Temperature | — | 0–40°C |
| Application | Data Center, Edge, Enterprise MTDC | Data Center, Edge, Enterprise MTDC |
| UPC | 61305682524 | 61305682536 |
Frequently Asked Questions
Which should you choose: the U01N11V or the U01N12L?
The U01N12L is the stronger choice when the deployment environment runs 230V single-phase power and requires enterprise-grade runtime assurance and management readiness out of the box. Three concrete spec deltas drive this: (1) the U01N12L confirms Double Conversion (Online) topology with zero transfer time versus no topology data for the U01N11V; (2) the U01N12L specifies Lithium-Ion batteries rated 10+ years with hot-swap support and sub-2-hour recharge, while the U01N11V lists no battery specifications; (3) the U01N12L ships with an Intelligent Network Card supporting SNMP v2/v3 and HTTPS, versus no management specs for the U01N11V. The U01N11V should be evaluated for 120V North American environments where its voltage suitability is implied by product title, but buyers must consult the datasheet to confirm topology, battery type, and management options before specifying it.
Is the U01N11V or U01N12L better for a North American 120V data center rack?
Based on available specifications, the U01N11V is described in its product title as a '120V SGL Phase' unit and carries a UPC of 61305682524, making it the candidate for North American 120V infrastructure. The U01N12L explicitly specifies 230V single-phase input and output, which is incompatible with standard North American mains without step-up transformation. However, voltage for the U01N11V is drawn from the product title rather than a discrete spec field — confirm against the U01N11V datasheet before ordering.
Does either UPS support hot-swappable batteries for zero-downtime maintenance?
Yes, but only for the U01N12L, which explicitly confirms hot-swappable battery support in its specifications. The U01N11V does not include any battery swap or maintenance information in the provided spec data. For facilities requiring battery replacement under load without a scheduled outage, the U01N12L is the only unit with a confirmed specification supporting that capability.
Do I need to purchase a network card separately for remote SNMP monitoring?
For the U01N12L, no — an Intelligent Network Card supporting SNMP v2/v3, HTTP/HTTPS, and Email Alerts is listed as an included accessory. For the U01N11V, the provided specifications contain no information about network management, included cards, or optional card slots. Buyers requiring SNMP integration on the U01N11V should review its datasheet at /content/product-datasheets/U01N11V.pdf to determine whether a management card is available and whether it is included or sold separately.
More UPS Comparisons
- Ubiquiti UPS-TOWER-US vs Panduit U01N12L
- Ubiquiti UPS-TOWER-US vs Panduit U01S12L
- Ubiquiti UPS-TOWER-US vs Middle Atlantic OL1000R-2
- Ubiquiti UPS-TOWER-US vs Middle Atlantic OL1000R-8
- Panduit U01N12L vs Middle Atlantic OL1000R-2
- Panduit U01N12L vs Middle Atlantic OL1000R-8
UPS Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.