CyberPower OR700LCDRM1U vs APC by Schneider Electric SMT700X167: Specification Comparison
The CyberPower OR700LCDRM1U and APC SMT700X167 are both 700VA line-interactive UPS units with automatic voltage regulation, targeting small server rooms, network closets, and edge deployments. The CyberPower ships in a 1U rackmount form factor while the APC is a tower unit — a meaningful physical distinction — but both protect 120V loads at the same VA class, making them legitimate cross-shop candidates for buyers who have flexibility on rack versus tower placement.
In This Guide
- Which unit delivers more usable power and runtime for the protected load?
- How do form factor, physical dimensions, and installation requirements differ between the two units?
- Which unit offers broader outlet count, data-line protection, and remote management capability?
- Which should you choose: the OR700LCDRM1U or the SMT700X167?
- Side-by-Side Specs
- FAQ
Which unit delivers more usable power and runtime for the protected load?
The APC SMT700X167 rates 450 W output versus the CyberPower OR700LCDRM1U at 400 W — a 50 W (12.5%) advantage in usable watt capacity at the same 700 VA rating. For loads approaching the watt ceiling, that margin matters: a 400 W load fully saturates the CyberPower while leaving the APC with 50 W of headroom.
The CyberPower specification explicitly states runtime: 3 minutes at full load (400 W) and 11 minutes at half load (200 W), backed by two 6V/8Ah sealed lead-acid batteries. The APC specification does not provide a runtime figure or battery capacity spec in the data supplied, so a direct runtime comparison cannot be made from available data.
The APC spec lists a true sine-wave output waveform explicitly; the CyberPower spec does not state waveform type, so buyers powering active PFC power supplies — common in modern servers — should verify CyberPower waveform independently before purchasing.
How do form factor, physical dimensions, and installation requirements differ between the two units?
The CyberPower OR700LCDRM1U is a 1U rackmount unit measuring 17.05 × 1.75 × 9.25 in (433 × 44 × 235 mm) and weighing 18.5 lb (8.39 kg). It occupies one rack unit and is purpose-built for 19-inch equipment racks. The APC SMT700X167 is a tower unit; physical dimensions and weight are not provided in the available specification data.
For buyers with existing rack infrastructure, the CyberPower's 1U profile is a direct fit with no additional mounting hardware described in the spec. The APC tower form factor suits environments without a rack — wiring closets, desktop deployments, or under-desk installations. Neither unit can substitute for the other without an additional rack-mount conversion kit (not specified for the APC in available data).
The APC unit lists an audible alarm and specifies a noise level of 45 dB. The CyberPower spec includes an LCD display for local status monitoring (load percentage, input/output voltage, estimated runtime) but does not list a noise level figure.
Which unit offers broader outlet count, data-line protection, and remote management capability?
The APC SMT700X167 provides 8 × NEMA 5-15R outlets. The CyberPower OR700LCDRM1U provides 6 × NEMA 5-15R outlets (4 battery-backed + surge, 2 surge-only). Buyers needing to protect more devices from a single UPS will find the APC's 8-outlet layout more accommodating.
The APC spec lists a surge energy rating of 540 J. The CyberPower spec does not state a joule surge rating, so a direct surge-protection comparison cannot be made from available data.
For management, the CyberPower provides USB and DB-9 serial ports, a multifunction LCD panel, and supports optional SNMP via the RMCARD205 card (sold separately). The APC spec confirms a USB port but does not specify serial, LCD display, SNMP card support, or data-line (RJ-11/RJ-45) protection in the provided data. The CyberPower spec explicitly includes RJ-11 and RJ-45 (10/100 Mbps) data-line protection; this feature is not listed for the APC in available data. The CyberPower also carries a $75,000 connected equipment guarantee (registration required); no equivalent figure is provided for the APC.
Which should you choose: the OR700LCDRM1U or the SMT700X167?
Our take: The OR700LCDRM1U is the stronger choice when the deployment requires 1U rackmount installation, on-site LCD monitoring, data-line protection, and a documented connected-equipment guarantee. The CyberPower occupies a single rack unit with explicit runtime figures (11 min at 200 W, 3 min at 400 W), RJ-11/RJ-45 surge protection, USB plus serial management, and optional SNMP — features not confirmed in the APC's available spec data. Conversely, the SMT700X167 edges ahead on raw watt capacity (450 W vs 400 W), outlet count (8 vs 6), and explicitly specifies a sine-wave output and 540 J surge rating — relevant for active-PFC server PSUs and higher device counts. Buyers fitting equipment into a rack enclosure should favor the CyberPower; buyers in a tower or open-shelf environment who need more outlets or confirmed sine-wave output for PFC-sensitive loads should evaluate the APC, pending confirmation of runtime and management specs from APC documentation.
Side-by-Side Comparison
Spec-for-spec, from manufacturer data.
| Specification | CyberPower OR700LCDRM1U | APC by Schneider Electric SMT700X167 |
|---|---|---|
| UPS Topology | Line Interactive with AVR | Line-Interactive with AVR |
| Capacity (VA) | 700 VA | 700 VA (0.7 kVA) |
| Capacity (Watts) | 400 W | 450 W |
| Output Waveform | — | Sine wave |
| Form Factor | Rackmount 1U | Tower |
| Dimensions (W×H×D) | 17.05 × 1.75 × 9.25 in (433 × 44 × 235 mm) | — |
| Weight | 18.5 lb (8.39 kg) | — |
| Input Voltage Range | 90–140 VAC | 100–290 V |
| Transfer Time | <4 ms | 6 ms |
| Total AC Outlets | 6 × NEMA 5-15R | 8 × NEMA 5-15R |
| Battery-Backed Outlets | 4 | — |
| Surge-Only Outlets | 2 | — |
| Surge Energy Rating | — | 540 J |
| Runtime at Half Load | 11 min (200 W) | — |
| Runtime at Full Load | 3 min (400 W) | — |
| Battery | 2 × 6V/8Ah sealed lead-acid | — |
| Management Ports | USB, Serial (DB-9) | USB |
| LCD Display | Multifunction LCD | — |
| SNMP Support | Optional (RMCARD205, sold separately) | — |
| Data Line Protection | RJ-11, RJ-45 (10/100 Mbps) | — |
| Noise Level | — | 45 dB |
| Certifications | UL1778, cUL 107.1, FCC DOC Class B, RoHS, ENERGY STAR | — |
| Warranty | 3 Year (electronics and battery) | — |
| Connected Equipment Guarantee | $75,000 (registration required) | — |
Frequently Asked Questions
Which should you choose: the OR700LCDRM1U or the SMT700X167?
The OR700LCDRM1U is the stronger choice when the deployment requires 1U rackmount installation, on-site LCD monitoring, data-line protection, and a documented connected-equipment guarantee. The CyberPower occupies a single rack unit with explicit runtime figures (11 min at 200 W, 3 min at 400 W), RJ-11/RJ-45 surge protection, USB plus serial management, and optional SNMP — features not confirmed in the APC's available spec data. Conversely, the SMT700X167 edges ahead on raw watt capacity (450 W vs 400 W), outlet count (8 vs 6), and explicitly specifies a sine-wave output and 540 J surge rating — relevant for active-PFC server PSUs and higher device counts. Buyers fitting equipment into a rack enclosure should favor the CyberPower; buyers in a tower or open-shelf environment who need more outlets or confirmed sine-wave output for PFC-sensitive loads should evaluate the APC, pending confirmation of runtime and management specs from APC documentation.
Is the OR700LCDRM1U or SMT700X167 better for protecting a small rack of network switches and a NAS?
The OR700LCDRM1U is the direct fit for rack environments — it installs in 1U and includes RJ-45 data-line protection relevant for switches. It provides 4 battery-backed outlets with documented runtime (11 min at 200 W). The SMT700X167 offers more outlets (8) and higher watt capacity (450 W), but is a tower unit and its runtime is not specified in the available data, so rack installers should confirm mounting options before choosing it.
Does either UPS support SNMP monitoring for integration with a network management system?
The CyberPower OR700LCDRM1U supports SNMP via the optional RMCARD205 network management card, sold separately. The APC SMT700X167 specification provided lists only a USB port; SNMP or network card support is not confirmed in the available spec data. Buyers requiring SNMP should verify APC's full accessory options in APC's own documentation before purchasing the SMT700X167 for that purpose.
Which unit is safer to use with modern servers that have active PFC power supplies?
The APC SMT700X167 explicitly specifies a sine-wave output waveform, which is the recommended waveform for active PFC power supplies used in most current servers and workstations. The CyberPower OR700LCDRM1U specification does not state the output waveform type in the data provided. Buyers powering active PFC loads should confirm CyberPower's waveform specification directly from CyberPower's datasheet before selecting the OR700LCDRM1U.
More UPS Comparisons
- APC by Schneider Electric BR700G vs CyberPower OR700LCDRM1U
- APC by Schneider Electric BR700G vs CyberPower SL700U
- APC by Schneider Electric BR700G vs APC by Schneider Electric BE700G3
- APC by Schneider Electric BR700G vs APC by Schneider Electric SMT700X167
- CyberPower OR700LCDRM1U vs APC by Schneider Electric BE700G3
- CyberPower OR700LCDRM1U vs CyberPower SL700U
UPS Buying Guides
Get a Second Opinion on Your Camera Choice
Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.