Camden products
-
Camden
SKU: CM-1100
Camden CM-1100 Key Switch SPST Momentary N/O
- Momentary N/O dry contact closes only while key is turned, eliminating relay coil draw.
- 30VDC rated contact integrates directly with low-voltage strike and mag-lock circuits.
- 1/4-inch die-cast aluminum housing accepts 1", 1-1/8", or 1-1/4" mortise cylinders.
In stock · Ships same business day$115.00 $69.99 Save $45.01 -
Camden
SKU: CM-1000/47
Camden DPDT maintained contact switch 6 A @ 125 VAC - CM-1000/47
- DPDT maintained contact latches in position, controlling two circuits simultaneously.
- Rated 6 A @ 125 VAC / 3 A @ 30 VDC — drives most EM locks and strikes without a relay.
- Accepts standard 1"–1¼" mortise cylinders, integrating into existing master key systems.
In stock · Ships same business day$65.00 $39.99 Save $25.01 -
Camden
SKU: 60-35E015
Camden 1/4\" Spacer Plate for CX-EPD1299L Electric - 60-35E015
- Corrects 1/4" frame-to-strike gap, ensuring flush seating and reliable latch retraction.
- Engineered exclusively for the CX-EPD1299L 24VDC electric strike — no compatibility guesswork.
- Installs using existing strike hardware; no additional fasteners required for secure mounting.
$37.99 -
Camden
SKU: 60-35E013
Camden 1/8\" Spacer Plate for CX-EPD1299L Electric - 60-35E013
- Corrects frame-to-strike misalignment on CX-EPD1299L installs with a precise 1/8" offset.
- Mounts using existing strike hardware — no additional tools or power beyond the 24VDC supply.
- 3-year warranty backs reliability in both retrofit and new-construction access control deployments.
$18.99 -
Camden
SKU: CX-MDH
Camden CX-MDH Magnetic Contact Recessed SPST White
- SPST contact closure wires directly to panel terminals—no IP config required.
$18.00 $10.99 Save $7.01 -
Camden
SKU: CX-MDA
Camden CX-MDA Magnetic Contact Surface Mount SPST
- SPST dry-contact output integrates with any hardwired access control panel instantly.
- Magnetic activation eliminates mechanical wear, reducing false triggers from vibration.
- Surface-mount design fits standard door frames with no cutting or reinforcement needed.
$11.00 $6.99 Save $4.01 -
Camden
SKU: CX-MA1214-38
Camden CX-MA1214-38 3/8" Filler Plate for Magnetic Lock
- Bridges 3/8" frame gaps to preserve the rated 1,200 lb magnetic holding force.
- Ensures flush lock seating for even load distribution, reducing wear on the lock face.
- Compatible with CX-91S-12 and CX-91M-06 locks running at 24VDC in retrofit installs.
$34.99 -
Camden
SKU: CX-MA1210
Camden CX-MA1210 L Bracket for 1 200 lb. Magnetic Lock
- Supports 1,200 lb magnetic locks for reliable holding force on commercial doors.
- L-bracket geometry prevents lateral shift and ensures consistent armature face contact.
- Compatible with Camden CX-91S-12 and CX-91M-12 on wood or metal door frames.
$55.99 -
Camden
SKU: CX-MA0614-12
Camden CX-MA0614-12 1/2" Filler Plate for 600 lb. Magnetic Lock
- Bridges frame gaps on 600 lb. magnetic lock installs without modifying the door frame.
- Maintains magnet-to-armature air gap within spec, preserving full 600 lb. holding force.
- Mounts using existing lock body fasteners — no additional hardware required.
$35.99 -
Camden
SKU: CX-MA0613D
Camden L \& Z Bracket for Double Door 600 lb. - CX-MA0613D
- L & Z geometry locks both door leaves simultaneously from a single 24VDC control signal.
- Rated 600 lb holding force supports high-security double-door deployments in vaults and server rooms.
- Bracket design eliminates frame alignment issues common in paired-opening magnetic lock installations.
$190.99 -
Camden
SKU: CX-MA0613
Camden CX-MA0613 L & Z Bracket for 600 lb Magnetic Lock
- L & Z bracket geometry supports both horizontal and vertical frame mounting orientations.
- Rated for 600 lb magnetic lock capacity, ensuring full holding force transfer to structure.
- Passive, non-electrical assembly simplifies installation with no power connections required.
$94.99 -
Camden
SKU: CX-MA0612
Camden CX-MA0612 Armature Housing for Magnetic Lock
- Provides strike-side mounting interface for 600 lb rated magnetic lock installations.
- Operates on 24VDC, compatible with standard armature plate geometry across lock families.
- All-metal housing mounts directly to wood, metal, or composite door frames via supplied fasteners.
$52.99 -
Camden
SKU: CX-MA0610
Camden CX-MA0610 L Bracket for 600 lb. Magnetic Lock
- L-bracket geometry solves angled or offset frame mounting for 600 lb mag locks.
- Engineered for 24VDC magnetic lock assemblies in commercial and institutional installs.
- Rated for indoor use from 0°C to 55°C, maintaining full holding-force alignment.
$53.99 -
Camden
SKU: CX-ED1959-MB
Camden Outdoor rated Grade 1 strike for exterior - CX-ED1959-MB
- Grade 1 / ANSI A156.3 rated; delivers 1,500 lb static and 70 ft-lb dynamic holding force.
- 12/24VDC selectable (280mA / 140mA) adapts to existing power supply architectures.
- Fail-safe or fail-secure mode is jumper-selectable, supporting egress and lockdown protocols.
$480.00 $285.99 Save $194.01 -
Camden
SKU: CX-ED-LIP2
Camden 2\" Lip Extension for CX-ED1079 and - CX-ED-LIP2
- Shifts strike lip 2 inches forward to match non-standard frame rabbet depths.
- Mounts directly to CX-ED1079 or CX-ED-2079 housing using existing holes—no brackets.
- Passive metal hardware preserves full holding force and fail-safe/fail-secure operation.
$32.00 $19.99 Save $12.01 -
Camden
SKU: CX-DESPK15SM
Camden CX-DESPK15SM 15W External Audio Speaker Station
- 15W output delivers 90dB+ SPL for clear voice alerts in moderate-noise environments.
- 24VDC operation ties directly into existing access control power—no extra transformer needed.
- Integrates with Camden CX-DE1200 and CX-DE1220 delayed-egress locks for code-compliant audio.
$150.00 $91.99 Save $58.01 -
Camden
SKU: CX-DE1220-N1
Camden CX-DE1220-N1 15/30 Selectable Exit Delay
- Controls up to 4 magnetic locks from one unit, cutting wiring runs and hardware count.
- Selectable 15- or 30-second exit delays per door support varied egress compliance needs.
- TCP/IP connectivity enables remote monitoring and integration with enterprise AC platforms.
$2,525.00 $1,537.99 Save $987.01 -
Camden
SKU: CX-DE1200-N3
Camden CX-DE1200-N3 30 Second Fixed Exit Delay
- Controls magnetic strikes across 4 independent doors from a single 24VDC controller.
- TCP/IP connectivity enables centralized remote monitoring and ACS integration over Ethernet.
- 30-second fixed exit delay delivers consistent, synchronized egress timing with proximity readers.
$1,400.00 $851.99 Save $548.01 -
Camden
SKU: CX-CL-LZBRK
Camden CX-CL-LZBRK L&Z Magnetic Lock Bracket
- L and Z magnetic lock bracket for 600 lb mag lock strike assemblies
- Dual-plane design accommodates both vertical and horizontal install
- Drops onto outswing and inswing door geometries without modification
$52.99 -
Camden
SKU: CX-91S-12
Camden 1 200 lbs. Surface mount single door - basic - CX-91S-12
- 1,200 lb holding force suits standard aluminum and steel single-door installs.
- Field-selectable 12/24VDC jumper eliminates rewiring when power supply voltages vary.
- Onboard door status switch feeds panel alarm loops with no additional hardware.
$240.00 $148.99 Save $91.01







