Ubiquiti

Ubiquiti

SKU: UA-G3-FLEX-B

Ubiquiti UA-G3-FLEX-B NFC Reader with Keypad and Apple Touch Pass

NFC reader with keypad and Apple Touch Pass for outdoor access control

• Multi-factor entry via NFC, Bluetooth 4.1, and PIN keypad suits high-security zones.
• PoE 802.3af powered at 5W; single RJ45 simplifies wiring with no separate power run.
• Rated -30 to 60°C with CE, FCC, UL 294 certs for compliant outdoor deployments.

Ubiquiti

SKU: UA-G3-B

Ubiquiti UA-G3-B 4th gen reader with Apple Touch Pass

4th gen compact reader with Apple Touch Pass and UniFi control

• Apple Touch Pass support eliminates physical badge dependency for iOS users.
• UniFi Controller integration centralizes RBAC and real-time credential updates.
• 0.2 lb compact form factor installs on standard door frames without modification.

Ubiquiti

SKU: UA-G2-SK-PRO

Ubiquiti UA-G2-SK-PRO Access Control Starter Kit

Compact hub + dual readers, PoE powered, UniFi cloud managed

• Single PoE port (5W, 48V DC) powers the hub—no separate 12V supply or conduit needed.
• IP54-rated enclosure with UL 294 and CAN/ULC-60839-11-1 certs meets physical security standards.
• UniFi Cloud management eliminates on-premises controllers across distributed entry points.

Ubiquiti

SKU: UA-G2-SK

Ubiquiti UA-G2-SK G2 Starter Kit PoE Intercom

Compact PoE intercom with IP55 rating for outdoor access control

• IP55-rated enclosure handles rain and dust storms for pole or perimeter installs.
• 48V PoE at 5W max eliminates separate power runs on any 802.3af-capable switch port.
• NDAA-compliant kit ships with Door Hub, G2 Reader, and 10 access cards ready to deploy.

Ubiquiti

SKU: UA-G2-PRO

Ubiquiti UA-G2-PRO Access Reader Cloud-Managed Entry Control

Cloud-managed wall reader, PoE only, IP55 rated for any entrance

• Single GbE PoE port draws only 6W at 48V DC, eliminating dedicated power runs.
• IP55-rated polycarbonate enclosure handles indoor and covered outdoor entrances.
• UniFi Access cloud management centralizes multi-site policy and audit logging.

Ubiquiti

SKU: UA-G2-BLACK

Ubiquiti UA-G2-BLACK UniFi Access Reader G2

In-wall proximity card reader with PoE power, UniFi management

• Draws power via 802.3af PoE, eliminating separate low-voltage runs to each door.
• IP55-rated enclosure handles dust and water exposure in entry vestibules or lobbies.
• Mounts flush in a standard gang box, simplifying retrofits into existing door frames.

Ubiquiti

SKU: UA-G2

Ubiquiti UA-G2 Access Reader G2

Compact in-wall NFC/Bluetooth reader for UniFi access control

• Tri-mode NFC/Bluetooth 4.1/Mifare support eases phased card-to-mobile migrations.
• IP55-rated polycarbonate enclosure handles moisture and dust in vestibule deployments.
• 802.3af PoE at 5W draws power from any standard switch—no local supply required.

Ubiquiti

SKU: UACC-UF-WDM-XGS

Ubiquiti UACC-UF-WDM-XGS Fiber Coexistence WDM Filter

Run GPON and 10G XGS-PON on one fiber with wavelength filtering

• Run GPON and XGS-PON simultaneously on one fiber strand, eliminating parallel cable runs.
• 24 ports (8 GPON, 8 XGS-PON, 8 COM) support mixed-speed subscriber tiers on shared optics.
• 1U rack-mount fits standard 19-inch racks alongside your OLT without additional space.

Ubiquiti

SKU: UACC-U7-PRO-WALL-COVER

Ubiquiti UACC-U7-PRO-WALL-COVER Paintable Wall Cover

Paintable cover for U7 Pro Wall—match any interior finish

Ubiquiti

SKU: UACC-U7-COVER

Ubiquiti UACC-U7-COVER Protective Cover for U7 Pro/Max

Paintable protective cover for U7 Pro and Pro Max access points

• Precision fit for U7 Pro and U7 Pro Max without blocking ports or airflow.
• Paintable polycarbonate surface blends hardware into any ceiling or wall finish.
• Lightweight at 129 g (4.6 oz) with ⌀217.4 × 48.3 mm profile for clean installs.

Ubiquiti

SKU: UACC-RJ45-COUPLER-C6A

Ubiquiti UACC-RJ45-COUPLER-C6A Compact RJ45 Inline Coupler

Compact shielded RJ45 coupler for tight-space ethernet extensions

• Shielded stainless steel body blocks EMI from motor drives and power lines.
• 16 × 16 × 31 mm profile fits junction boxes and conduit elbows without rerouting.
• ANSI/TIA-568-D.2 compliant; ships in 10-unit packs for structured cabling runs.

Ubiquiti

SKU: UACC-PSU-12V-550W

Ubiquiti UACC-PSU-12V-550W Hot-Swappable Power Module

550W hot-swappable PSU for Ubiquiti NVR & enterprise systems

• 550W at 12V/45A sustains full-load NVR recording and PoE switching simultaneously.
• Hot-swap design allows live PSU replacement with zero system downtime or recording loss.
• Universal 100–240V AC input and standard C14 IEC connector require no adapters globally.

Ubiquiti

SKU: UACC-PANICBAR

Ubiquiti UACC-PANICBAR Single-Latched Emergency Door Panic Bar

Single-latched panic bar with dry relay for any access control system

• Dry relay output (30V DC, 1A) integrates with any access control or VMS platform.
• UL 305, UL 10C, and CAN/ULC-S132 certified for life-safety and cold-climate compliance.
• Aluminum and stainless steel housing withstands corrosion in high-humidity environments.

Ubiquiti

SKU: UACC-OM-SFP28-SR

Ubiquiti UACC-OM-SFP28-SR 25G SFP28 Optical Transceiver

25G SFP28 transceiver for multi-mode fiber up to 100 meters

• Delivers 25 Gbps full-duplex throughput over multi-mode fiber up to 100 m.
• Dual LC UPC connectors work with existing MMF runs; no fiber replacement needed.
• 0.8 W max draw minimizes thermal load in dense SFP28 switch chassis.

Ubiquiti

SKU: UACC-OM-SFP28-LR

Ubiquiti UACC-OM-SFP28-LR 25G Single-Mode Optical Module

25G single-mode optical module, 10 km reach, SFP28 form factor

• Delivers 25 Gbps over single-mode fiber up to 10 km, eliminating repeaters on long runs.
• SFP28 form factor with Duplex LC UPC connector integrates into standard modular switch slots.
• 1.3 W max draw keeps power budget intact when deploying across high-density switching platforms.

Ubiquiti

SKU: UACC-OM-SFP10-1550

Ubiquiti UACC-OM-SFP10-1550 10G SFP+ CWDM Transceiver 1550nm

10G SFP+ transceiver at 1550nm CWDM for long-reach fiber

• Delivers full 10 Gbps throughput over fiber, eliminating backbone bottlenecks.
• 1550 nm CWDM wavelength supports long-reach campus and WAN fiber runs.
• Standard SFP+ form factor integrates with Ubiquiti and third-party switches.

Ubiquiti

SKU: UACC-OM-SFP10-1510

Ubiquiti UACC-OM-SFP10-1510 10G CWDM SFP+ Transceiver

10G CWDM SFP+ transceiver at 1510 nm for multi-wavelength fiber links

• Delivers 10 Gbps full-duplex throughput over a dedicated 1510 nm CWDM wavelength.
• Runs on host SFP+ port power (3.3 V) with no external supply needed for fast deployment.
• Supports –40 °C to 90 °C storage range, suitable for demanding infrastructure environments.

Ubiquiti

SKU: UACC-OM-SFP10-1310

Ubiquiti UACC-OM-SFP10-1310 SFP+ CWDM Transceiver 1310nm

10 Gbps SFP+ CWDM transceiver at 1310nm for long-range SMF links

Ubiquiti

SKU: UACC-OM-SFP10-1270

Ubiquiti UACC-OM-SFP10-1270 10G SFP+ CWDM Transceiver

10G SFP+ CWDM transceiver for Ubiquiti platforms, 1270 nm wavelength

• 10 Gbps SFP+ module handles full-saturation aggregation traffic without rate-limiting.
• 1270 nm CWDM channel enables wavelength multiplexing over a single existing fiber pair.
• Standard SFP+ form factor supports hot-swap installation in any compatible Ubiquiti slot.

Ubiquiti

SKU: UACC-OM-QSFP28-SR4

Ubiquiti UACC-OM-QSFP28-SR4 100G SR4 Multi-Mode Optical Module

100G SR4 multi-mode transceiver for data center and campus fiber

• Dual-rate 40G/100G operation reduces spare-parts inventory in mixed-speed deployments.
• 850 nm OM3/OM4 multi-mode fiber support lowers cabling costs versus single-mode alternatives.
• 100 m maximum reach covers pod-to-pod and campus runs at only 2.5 W power draw.