Ubiquiti UACC-PANICBAR Single-Latched Emergency Door Panic Bar
Overview
The Ubiquiti UACC-PANICBAR is a single-latched panic bar accessory engineered for integration with emergency door access control systems in commercial, institutional, and industrial facilities. Constructed from aluminum and stainless steel, this unit delivers durability in high-traffic environments where reliable emergency egress is non-negotiable. The panic bar measures 838 x 294 x 94 mm (33 x 11.6 x 3.7 inches) and weighs 5.8 kg (12.8 lbs), providing a compact yet robust form factor suitable for standard door widths.
Key Features
- Dry Relay Output (30V DC, 1A rating): Eliminates proprietary interface requirements — this dry contact configuration connects to virtually any access control platform, VMS, or monitoring system without special adapters. Simplifies integration into existing infrastructure and reduces vendor lock-in.
- Aluminum and Stainless Steel Construction: Resists corrosion and withstands repeated actuation cycles in humid or salt-spray environments (warehouses, coastal facilities, institutional kitchens). No paint or coating maintenance required.
- UL 305 Certification: Meets stringent North American egress hardware standards, ensuring the panic bar functions reliably under emergency conditions and complies with ADA and life-safety code requirements. Required for municipal permitting in most commercial installations.
- UL 10C and CAN/ULC-S132 Compliance: Validates performance in cold-climate and Canadian facility deployments. Demonstrates third-party testing of durability and safety — not self-certified.
- Single-Latched Design: Simpler mechanism than dual-latch alternatives, reducing maintenance overhead and the number of wear points. Appropriate for frequent-use doors but verify your life-safety code does not mandate dual latching for your application.
- Ubiquiti Ecosystem Integration: Works within Ubiquiti's broader access control and building automation ecosystem, allowing coordinated management alongside IP cameras, door controllers, and surveillance infrastructure on a unified network platform.
Integration & Compatibility
The dry relay contact is the integration point — it signals door actuation events to any system monitoring that relay (access control panels, NVRs, building management systems, or custom automation scripts). No firmware updates or proprietary drivers required. If you are standardizing on Ubiquiti access control hardware or running a multi-vendor environment, this accessory's vendor-neutral relay output is a practical advantage.
For retrofit scenarios, verify mounting compatibility with your existing door frame and panic bar housing. The 838 mm length suits standard commercial door widths (36–48 inches); consult the manufacturer or a local integrator if you have non-standard frame geometry.
When to Choose a Different Model
If your facility requires dual-latched panic hardware for enhanced security or life-safety compliance, check whether Ubiquiti offers a dual-latch variant in the same family. If emergency egress on your doors is seldom used or subject to minimal actuation stress (e.g., confined-access server rooms), a lower-cost non-networked mechanical panic bar may suffice — this unit's value is in integration and monitoring, not mechanical durability alone.
FAQ
Q: Is the UACC-PANICBAR compatible with existing access control panels?
A: Yes. The dry relay output (30V DC, 1A) integrates with any access control panel, building management system, or monitoring platform that accepts a standard normally-open or normally-closed relay contact. No proprietary software or drivers are required.
Q: What certifications does the UACC-PANICBAR hold?
A: The unit meets UL 305 (panic hardware), UL 10C (cold-climate hardware), and CAN/ULC-S132 (Canadian emergency egress standards). These certifications ensure compliance with North American life-safety codes and municipal building permits.
Q: Can the UACC-PANICBAR be installed on any door?
A: The panic bar is 838 mm long, suitable for standard commercial door widths (36–48 inches). For non-standard frame geometry or retrofit installations, confirm mounting compatibility with a local integrator or the manufacturer before ordering.
Q: What is the relay contact rating, and what can it control?
A: The dry relay output is rated 30V DC at 1A maximum. This can directly trigger low-power loads (indicator lights, solenoid unlock signals) or interface with a larger control system's input module. Do not exceed 1A or 30V DC — oversizing will damage the relay.
Q: Does the UACC-PANICBAR require batteries or external power?
A: The panic bar is a mechanical device with a dry relay output. Power for the relay circuit comes from your access control or monitoring system — the panic bar itself does not consume power independently.
Q: Is this unit suitable for high-traffic facilities?
A: Yes. The aluminum and stainless steel construction is engineered for repeated actuation in warehouses, hospitals, educational institutions, and manufacturing floors. Single-latch design reduces wear points compared to dual-latch alternatives.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The UACC-PANICBAR is a straightforward integration play — it's dry relay signaling, not a standalone control device. If you're building a mixed-vendor emergency egress system or retrofitting panic hardware into an existing access control topology, this unit's 30V DC 1A relay contact is your bridge. No proprietary firmware, no cloud dependency, no authentication. That dry contact integrates with virtually anything that accepts a switch closure.
Technical Highlights:
- 30V DC, 1A Dry Relay: Eliminates vendor lock-in and simplifies integration across heterogeneous control platforms. Standard contact rating is mature technology — no surprises in the field.
- UL 305 + UL 10C + CAN/ULC-S132: Three separate certifications demonstrate that this hardware passes cold-climate stress testing, meets egress requirements, and clears Canadian code compliance. Auditors and AHJs (Authority Having Jurisdiction) will accept it without pushback.
- Aluminum and Stainless Steel: Corrosion resistance is key in facilities with salt spray, humidity, or chemical exposure. Reduces touch-up maintenance and extends service life beyond powder-coated alternatives.
Deployment Considerations:
- Verify that 838 mm length matches your door width before ordering — retrofit installations on narrow or oversized frames may require custom mounting or an integrator's judgment call.
- Single-latch design is simpler but check your local life-safety code; some jurisdictions mandate dual latching for certain facility types (e.g., psychiatric units, correctional facilities). Ubiquiti may offer a dual-latch variant — confirm before finalizing the spec.
- The relay closure only signals actuation; it does not lock or unlock the door independently. You'll need a door release mechanism (electric strike, magnetic lock) upstream of this panic bar to create a complete emergency egress control loop.
Deploy this UACC-PANICBAR (often searched as UACC PANICBAR) in commercial buildings, warehouses, or institutional facilities where emergency egress compliance and integration with a multi-vendor access control system are non-negotiable. It's not a feature-rich device — it's a reliable, code-compliant signal generator, and that's exactly what you need when life safety is the requirement.
