Ubiquiti UACC-OFC-SA-MPMP-0.5M Indoor OS2 Single-Mode Fiber Patch Cable
Overview
The Ubiquiti UACC-OFC-SA-MPMP-0.5M is a 0.5-meter indoor OS2 single-mode fiber patch cable terminated with male-to-male MPO-12 Type B APC connectors. This cable is purpose-built for 100G high-speed interconnects in data center backbones and enterprise network infrastructure — exactly the kind of equipment-to-equipment run where a short, precision-length patch cable prevents slack and simplifies cable management in dense rack environments.
OS2 single-mode fiber is the standard for long-distance, high-bandwidth applications; it transmits at 1310 nm and 1550 nm wavelengths and maintains signal integrity over backbone runs far longer than multimode alternatives. The 0.5-meter length is intentional — not a general-purpose cable, but built for front-panel-to-front-panel connections where you cannot afford guesswork on slack or routing complexity.
Compatibility
This cable connects any two network devices equipped with MPO-12 Type B APC fiber ports — including Ubiquiti high-speed routing and switching infrastructure, data center switching fabrics, and carrier-class backbone systems. Verify your equipment supports MPO-12 Type B APC termination before purchase; mismatched connector types (e.g., UPC vs. APC, MPO-8 vs. MPO-12) will not mate.
Installation Notes
Keep the cable away from sharp bends; single-mode fiber is more fragile than copper and more sensitive to microbend losses if routed around tight corners. In rack environments, run the cable through existing cable trays or management clips to avoid compression. The lightweight construction (0.100 lb) means no special support hardware is needed — standard cable management brackets are sufficient. Do not coil the cable tightly; a minimum bend radius of 1–1.5 inches is good practice for OS2 single-mode fiber.
What's in the Box
- 1x Ubiquiti UACC-OFC-SA-MPMP-0.5M fiber patch cable (0.5 meters)
