Mounting Brackets & Kits for IP Cameras

Plan Your Deployment

Wall, ceiling, pole, or corner mounting requirements
Indoor vs outdoor environmental exposure
Device model compatibility and load capacity
Vandal resistance and tamper considerations
Future service access and cable routing planning

Sub categories

Showing Results for Mounting Brackets & Kits

Compare

Add to Cart The item has been added
Axis

SKU: 01612-001

Axis T91A23 Tile Grid Ceiling Mount 4-Pack - 01612-001

4-pack tile grid ceiling mounts for Axis cameras in drop-tile spaces
- Fits 15mm, 24mm, and 35mm T-bar widths—covers most standard grids
- Works with square-edge and tegular (recessed) ceiling tiles
- Four mounts per pack in Axis White to blend into suspended ceilings
In stock · Usually Ships Same Business Day

$94.00 $90.99 Save $3.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Axis

SKU: 01470-001

Axis T91B57 Aluminum Pole Mount 57" - 01470-001

Aluminum pole mount for 4"–16" poles, indoor/outdoor surveillance
- Stainless steel straps (57") resist corrosion in outdoor environments
- Works with T91G61, T91H61 housings and T98A cabinet series
- TX30 screw interface for quick tool-free assembly and adjustment
In stock · Usually Ships Same Business Day

$139.00 $134.99 Save $4.01

Add to Cart
The item has been added
Compare

Out of stock
Axis

SKU: 02586-001

Axis TM2001 Wall Mount Bracket M20 Bullet - 02586-001

Wall mount bracket for Axis M2035-LE and M2036-LE bullet cameras
- Pack of 5 brackets for multi-camera deployments or larger installations
- Manual pan/tilt aiming via camera body with no power required
- IP65-rated white steel construction for indoor and outdoor wall mounting
Special Order · Usually Ships in 2-3 Weeks

$41.00 $39.99 Save $1.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBF-100B1

Hanwha SBF-100B1 Backbox for Fisheye Cameras

Aluminum backbox for Hanwha fisheye cameras with corrosion-resistant finish
- Lightweight aluminum construction resists corrosion in outdoor and high-moisture environments
- Engineered for Hanwha fisheye range with standard ceiling and wall mounting
- Maintains level camera positioning for full panoramic coverage in retail and commercial surveillance
In stock · Usually Ships Same Business Day

$49.00 $36.99 Save $12.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hanwha

SKU: SBP-302F

Hanwha SBP-302F Ceiling Tile Support Plate

Ceiling tile support plate for Hanwha X series and panoramic cameras
- Dual mounting holes (12.85" and 7.20") fit six camera models with one SKU
- Durable construction rated for indoor drop-ceiling environments year-round
- Simplifies flush-mount installation in offices, retail, and institutional spaces
In stock · Usually Ships Same Business Day

$192.99

Add to Cart
The item has been added
Compare

Out of stock
Hanwha

SKU: SHP-1680FPW

Hanwha SHP-1680FPW Ceiling Flush Mount

Ceiling flush mount for Hanwha dome cameras, plenum-rated aluminum
- Low-profile in-ceiling design integrates discreetly into commercial spaces
- Plenum-rated aluminum construction meets fire safety standards
- Compatible with 6 Hanwha camera models including XNP and HCP series
Special Order · Usually Ships in 2-3 Weeks

$159.00 $120.99 Save $38.01

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: DS-1227ZJ-DM44

Hikvision DS-1227ZJ-DM44 In-Ceiling Mount

Aluminum in-ceiling mount for Hikvision dome cameras in drop-tile or drywall
- Aluminum alloy construction resists corrosion in humid indoor environments
- Flush-mount design hides camera lens and housing above finished ceiling
- Secure platform maintains consistent field of view without drift over time
In stock · Usually Ships Same Business Day

$52.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PC130T

Hikvision PC130T Pendant Cap for Mini Turret Camera

Aluminum pendant cap for Hikvision mini turret cameras
- Suspends camera below ceiling for clean sightlines in retail and warehouses
- Aluminum alloy construction resists corrosion in temperature-variable environments
- Weatherproof design shields connections from dust and rain splash indoors
In stock · Usually Ships Same Business Day

$35.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: PP1

Hikvision PP1 Pendant Mounting Bracket, White

Pendant ceiling mount with IP67 waterproof aluminum for Hikvision cameras
- IP67-rated aluminum alloy resists corrosion in outdoor and high-humidity environments
- Extendable arm adjusts camera height and angle for optimal downward viewing
- Organized cable routing protects wiring from UV, pinching, and weather exposure
In stock · Usually Ships Same Business Day

$35.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
Hikvision

SKU: WMP-L

Hikvision WMP-L Wall Mount PTZ - Long

Wall mount for Hikvision PTZ cameras with waterproof aluminum construction
- Aluminum alloy resists corrosion in outdoor and salt-air environments
- Full waterproof design protects fasteners and connection points from rain
- Long format prevents interference with larger PTZ lens housings and motors
In stock · Usually Ships Same Business Day

$52.99

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QCN500-W

i-PRO WV-QCN500-W Corner Mount Bracket for Dome Cameras

Corner mount bracket for i-PRO dome cameras at 90-degree wall intersections
- Mechanical bracket design eliminates blind spots at building corners and wall junctions
- White finish blends into interior and exterior surfaces for reduced visual impact
- Steel construction holds dome cameras in fixed position without motorized drift
In stock · Usually Ships Same Business Day

$135.11 $120.99 Save $14.12

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QEM100-W

i-PRO WV-QEM100-W Embedded Ceiling Mount Bracket

Flush ceiling mount bracket for i-PRO dome cameras with night vision
- Embedded design installs flush into ceiling cavity for discrete placement
- Compatible with i-PRO dome camera systems and built-in IR night vision
- White finish with HTTPS encryption support for secure indoor installations
Special Order · Usually Ships in 2-3 Weeks

$80.21 $71.99 Save $8.22

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QJB501-W

i-PRO WV-QJB501-W White Base Bracket Ceiling and Wall Mount

Universal white bracket for ceiling and wall i-PRO camera mounting
- Dual-orientation design handles both horizontal ceiling and vertical wall
- White finish blends into drop-tile ceilings and neutral office environments
- Works across i-PRO dome, turret, and compact camera form factors
In stock · Usually Ships Same Business Day

$80.81 $72.99 Save $7.82

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QJB502A-B

i-PRO WV-QJB502A-B Ceiling Surface Mount Bracket

Ceiling surface mount bracket for i-PRO indoor camera systems
- Black metal construction with secure fastening for stable camera positioning
- Direct ceiling surface mounting compatible with i-PRO surveillance cameras
- Indoor-rated design built for commercial and enterprise security installations
Special Order · Usually Ships in 2-3 Weeks

$76.77 $68.99 Save $7.78

Add to Cart
The item has been added
Compare

Out of stock
i-PRO

SKU: WV-QJB505-W

i-PRO WV-QJB505-W Base Bracket Mount

White base bracket mount for fixed i-PRO camera installations
- Stable base bracket design for secure indoor and outdoor deployment
- IP67-rated and IK10-impact resistant for harsh environment durability
- Compatible with i-PRO surveillance camera systems across all models
Special Order · Usually Ships in 2-3 Weeks

$110.92 $99.99 Save $10.93

Add to Cart
The item has been added
Compare

Add to Cart The item has been added
i-PRO

SKU: WV-QSR506F1-W

i-PRO WV-QSR506F1-W ANSI Female Mount Bracket

White ANSI female mount bracket for ceiling/wall commercial surveillance
- ANSI female mount accepts standard i-PRO camera connectors
- Ceiling or wall installation in finished commercial environments
- White powder-coat finish blends with standard building surfaces
In stock · Usually Ships Same Business Day

$85.30 $76.99 Save $8.31

Add to Cart
The item has been added

What to Look For When Buying

The decisions that matter most before you spec.

Load Rating & Vibration Damping

Mounting brackets must support camera weight (typically 0.5–15 lbs for IP cameras) plus wind load in outdoor deployments. Improperly secured cameras cause system failure during critical incidents; select brackets rated for your camera model and environmental stress factors. Gyro mounts and rubber isolators reduce vibration in high-wind or traffic-adjacent zones.

Cable Routing & PoE Management

Mounting kits with integrated cable glands and strain relief prevent cable pinch points and maintain PoE power delivery stability. Conduit clips and backing plates organize cables at the source, reducing troubleshooting time and protecting against accidental disconnection during maintenance.

Material & Corrosion Resistance

Outdoor and coastal installations require stainless steel or powder-coated aluminum brackets to prevent rust and material degradation. Salt spray, humidity, and UV exposure degrade standard steel within 6–12 months; specify 300/316 stainless for marine environments and 6063 aluminum for standard outdoor use.

Installation Standard & Brand Compatibility

Major brands like Axis, Hanwha, and Vivotek design proprietary mounting interfaces alongside VESA and ISO standard mounts. Verify bracket compatibility with your camera model before procurement; cross-brand mounts may misalign optical paths or create cable stress points.

Height, Angle & Optical Alignment

Camera mounting height and tilt affect pixel density and DORI (Detection, Observation, Recognition, Identification) distances. Adjustable brackets allow field-level fine-tuning; fixed mounts require accurate site survey and pre-deployment calculations to avoid costly repositioning after installation.

Conduit Seal & Weatherproofing

Water ingress at cable entry points causes short circuits and sensor corrosion in wet environments. Select kits with silicone gaskets, stainless steel cable glands, and IP67-rated enclosures; test seals during initial deployment to prevent mid-season failures.

Technology Stack

The specs and acronyms that actually affect mounting brackets & kits performance.

VESA Mount Standards (75/100/200 mm)

Standardized hole patterns used by consumer electronics and some IP camera models. Allows universal bracket compatibility across manufacturers, but always verify camera's screw pitch and load rating before mixing brands.

Wind Load Rating (lbs @ mph)

Manufacturers specify maximum wind speed brackets withstand without camera slip or structural flex. Outdoor installations require ratings matching local weather extremes; most outdoor brackets support 60–120 mph sustained winds, but rooftop or exposed mounting may demand 150+ mph ratings.

Stainless Steel Grades (304/316)

Grade 304 resists general corrosion in most climates; Grade 316 adds molybdenum for superior salt-spray tolerance in coastal zones. Galvanized steel (zinc coating) offers cost savings but degrades 3–5 years faster than stainless in humid/marine environments.

Cable Gland Certifications (IP67/IP68)

IP rating indicates water and dust ingress protection at cable entry. IP67 withstands temporary immersion; IP68 is rated for continuous submersion. Select IP67 minimum for outdoor camera mounts, IP68 for wet-room intercoms and dock-area access readers.

Gyro Mounts & Vibration Damping

Rubber or elastomer isolators reduce micro-vibrations transmitted from poles or wind, stabilizing video in high-motion environments. Critical for PTZ cameras on rooftop poles or traffic-adjacent installations; adds 0.5–2 lbs to mounting weight.

Conduit Diameter & Strain Relief

Brackets specify maximum conduit size (typically 0.5–1.5 inches) and cable bend radius. Exceeding bend-radius limits degrades PoE conductor insulation; use clips and backing plates to maintain manufacturer-specified minimum bend radius (usually 4–6 inches for Ethernet).

Typical Deployment Scenarios

Multi-Story Office Lobby (15 cameras, mixed mount types)

Combine ceiling-mount brackets for overview domes at entry points, corner brackets for stairwell coverage, and recessed in-wall mounts for elevator vestibules. Use Hanwha or Axis unified bracket kits to simplify procurement; junction-box assemblies pre-mount cable glands and backing plates, reducing on-site assembly by 40%.

Outdoor Parking Lot Perimeter (24 cameras, 30-ft poles)

Specify heavy-duty pole mounts rated for 80+ mph wind load, stainless steel hardware, and gyro isolation for vibration damping. Include pendant conduit kits with silicone gaskets and IP67 glands; plan cable routing inside pole conduit to protect PoE runs from weather and UV degradation.

Hospital Intercom & Card-Reader Network (40 stations, recessed mount)

Use recessed trim-ring kits designed for flush in-wall mounting at staff stations, nurse calls, and secure doors. Select 316 stainless trim rings; pair with concealed junction boxes to route cables through wall cavities, maintaining clean aesthetics while protecting core network connections from physical damage.

Warehouse Dock & Data-Capture Zone (8 cameras, industrial-grade PTZ)

Heavy-duty PTZ mounts on gantry beams require gyro dampers and reinforced backing plates rated for 20+ lbs static load. Route PoE and pan-tilt control cables through conduit; ensure sufficient power budget per PoE planning guidance for simultaneous motor operation across all units.

Frequently Asked Questions

What's the difference between VESA and proprietary camera mounts?

VESA (75/100/200 mm) are universal screw-hole patterns used by monitors and some IP cameras, allowing mixed-brand bracket compatibility. Proprietary mounts are manufacturer-specific and often integrate cable routing and power connectors for a given camera family. Always verify your camera's mounting interface before ordering; mixing standards can misalign the lens or create cable stress.

How do I choose between wall, pole, and ceiling mounting?

Wall mounts suit indoor hallways and perimeter coverage; ceiling mounts provide overhead overview angles; pole mounts enable tall outdoor installations for parking lots and large perimeters. Consider viewing angle (DORI distance), cable routing (PoE run length), and environmental exposure (rain, wind, UV). Outdoor deployments typically require pole or soffit brackets with stainless hardware and weatherproof conduit seals.

What wind-load rating do I need for rooftop or pole-mounted cameras?

Most outdoor brackets are rated 60–80 mph; rooftop and tall-pole installations in high-wind zones (hurricane, mountain, or exposed coastal areas) require 100–150+ mph ratings. Consult local building codes and weather records for your site. Undersized brackets allow camera drift, misaligning views and degrading identification accuracy over distance.

Why should I use stainless steel brackets in coastal or humid climates?

Standard steel and galvanized coatings corrode within 2–5 years in salt-spray or high-humidity zones, causing bracket failure and camera drop hazards. Stainless 304 resists general corrosion; 316-grade adds molybdenum for superior marine tolerance. The upfront cost (typically 20–40% more) prevents emergency replacement and liability exposure.

What's an IP67 cable gland, and why does it matter for outdoor mounts?

IP67 means the gland prevents dust and temporary water submersion at cable entry points. Water ingress corrodes connectors and shorts PoE circuits, causing mid-deployment failures. Pair IP67 glands with silicone gaskets and stainless fasteners; test seals before final installation to confirm weatherproofing.

Can I use the same mounting bracket for different camera brands?

Only if both cameras share VESA or ISO mounting standards. Proprietary mounts (common in Axis, Vivotek, and Hanwha models) are not interchangeable. Mixing brands often requires adapter plates, which add bulk, cost, and potential optical misalignment. Standardize on one or two manufacturer families per project to simplify spare-parts inventory and on-site troubleshooting.

Mounting Brackets & Kits

Plan Your Deployment

Sub categories

Showing Results for Mounting Brackets & Kits

Axis T91A23 Tile Grid Ceiling Mount 4-Pack - 01612-001

Axis T91B57 Aluminum Pole Mount 57" - 01470-001

Axis TM2001 Wall Mount Bracket M20 Bullet - 02586-001

Hanwha SBF-100B1 Backbox for Fisheye Cameras

Hanwha SBP-302F Ceiling Tile Support Plate

Hanwha SHP-1680FPW Ceiling Flush Mount

Hikvision DS-1227ZJ-DM44 In-Ceiling Mount

Hikvision PC130T Pendant Cap for Mini Turret Camera

Hikvision PP1 Pendant Mounting Bracket, White

Hikvision WMP-L Wall Mount PTZ - Long

i-PRO WV-QCN500-W Corner Mount Bracket for Dome Cameras

i-PRO WV-QEM100-W Embedded Ceiling Mount Bracket

i-PRO WV-QJB501-W White Base Bracket Ceiling and Wall Mount

i-PRO WV-QJB502A-B Ceiling Surface Mount Bracket

i-PRO WV-QJB505-W Base Bracket Mount

i-PRO WV-QSR506F1-W ANSI Female Mount Bracket

Browse by Product Family

What to Look For When Buying

Technology Stack

Typical Deployment Scenarios

Top Brands for Mounting Brackets & Kits

Frequently Asked Questions

Related Categories

Engineering Reading